Unlocking the potential of BECCS with indigenous sources of biomass at a national scale
文献情報
Piera Patrizio, Florian Kraxner
Bioenergy with carbon capture and storage (BECCS) could play a large role in meeting the 1.5 °C targets, but faces well-documented controversy in terms of land-use concerns, competition with food production, and cost. This study presents a bottom-up assessment of the scale at which BECCS plants – biomass pulverised combustion plants (“BECCS” in this study) and bioenergy combustion in combined heat and power plants (BE-CHP-CCS) – can be sustainably deployed to meet national carbon dioxide removal (CDR) targets, considering the use of both primary and secondary (waste-derived) biomass. This paper also presents a comprehensive, harmonised data set, which enables others to build upon this work. Land availability for biomass cultivation, processing, and conversion is quantified based on a land-use analysis, avoiding all competition with land used for food production, human habitation, and other protected areas. We find that secondary biomass sources provide a valuable supplement to primary biomass, augmenting indigenous biomass supplies. In initial phases of deployment, we observe that infrastructure is initially clustered near cities, and other sources of low cost, secondary biomass, but as CDR targets are increased and indigenous secondary biomass supplies are exhausted, infrastructure begins to move closer to potential biomass planting areas with higher yield. In minimising the cost of CDR on a cost per net tonne CO2 removed basis, we find that the availability of secondary biomass, land availability, and yield are key factors that drive the cost of CDR. Importantly biomass conversion efficiency of a BECCS plant has an inverse effect on CDR costs, with less efficient plants resulting in lower costs compared to their more efficient counterparts. By consuming secondary biomass in BECCS and BE-CHP-CCS plants, the UK is able to be self-sufficient in biomass supply by utilising available indigenous biomass to remove up to 50 MtCO2 per year, though for cost reasons, it may be preferable to import some biomass.
関連文献
Effect of partial pressure on product selectivity in Cu-catalyzed electrochemical reduction of CO2
Mozhgan Moradzaman, Carlos Sánchez Martínez, Guido Mul
DOI: 10.1039/D0SE00865F
Formation criteria of high efficiency perovskite solar cells under ambient conditions
Clara Aranda, Cesar Cristobal, Cheng Li, Sven Huettner, Antonio Guerrero
DOI: 10.1039/C6SE00077K
Rock ‘n’ use of CO2: carbon footprint of carbon capture and utilization by mineralization
Hesam Ostovari, André Sternberg
DOI: 10.1039/D0SE00190B
Nano-enabled bioanalytical approaches to ultrasensitive detection of low abundance single nucleotide polymorphisms
Yuan Guo, Dejian Zhou
DOI: 10.1039/C4AN02304H
Catalytic hydrodeoxygenation of biomass-derived oxygenates to bio-fuels over Co-based bimetallic catalysts
Zhen-Hong He, Chong-Shan Jiang, Zhong-Yu Wang, Kuan Wang, Yong-Chang Sun, Man-Qing Yao, Zhu-Hui Li
DOI: 10.1039/D0SE00332H
Calibration diagnostic and updating strategy based on quantitative modeling of near-infrared spectral residuals
Hua Yu, Gary W. Small
DOI: 10.1039/C4AN01849D
Photoelectrochemical H2 evolution using TiO2-coated CaFe2O4 without an external applied bias under visible light irradiation at 470 nm based on device modeling
Takamitsu Futagami, Takaaki Sakai, Motonori Watanabe
DOI: 10.1039/C7SE00084G
Supramolecular architectures featuring the antenna effect in solid state DSSCs
Georgios Charalambidis, Kostas Karikis, Evangelos Georgilis, Bilel Louahem M'Sabah, Yann Pellegrin, Aurélien Planchat, Bruno Lucas, Anna Mitraki, Johann Bouclé, Fabrice Odobel, Athanassios G. Coutsolelos
DOI: 10.1039/C6SE00051G
Increased hydrogen partial pressure suppresses and reverses hydrogen evolution during Pd catalysed electrolysis of CO2
Wim P. M. van Swaaij, Guido Mul, Sascha R. A. Kersten
DOI: 10.1039/D0SE00731E
こちらもおすすめ
4'-ブロモビフェニル-3-メトークシーディ.ActionBarはどのように保存すればよいですか?
4'-ブロモビフェニル-3-メトークシーディ.ActionBarは、冷暗所で、直射日光を避け、密栓の容器に保存し、遠隔場所に保管してください。温度は常温(0〜2...
2-異丙基フェニルヒドラジン塩酸塩とは何ですか?
2-異丙基フェニルヒドラジン塩酸塩は、CAS番号58928-82-8を有する化合物で、構造式はC11H14N2HClです。これは塩基性化合物であり、水に溶けやす...
5-(4-クロロフェニル)-4H-1,2,4-三氮唑-3-アミンを取り扱う際の実験室安全事項は何ですか?
5-(4-クロロフェニル)-4H-1,2,4-三氮唑-3-アミンは取り扱いに注意が必要です。PPEとして防塵マスク、ゴーグル、手袋を使用し、ドラフトチャンバーを...
去甲基雷贝拉唑硫醚はどのように合成されますか?
去甲基雷贝拉唑硫醚は、ベンジミダゾール硫化物と3-メチル-4-ピリジノールの反応によって合成されます。具体的には、2-チオキシドベンジミダゾールと3-メチル-4...
2-ブロモ-5-フロロ-N-(2-フェノールメチル)ベンゼンウレアは安全ですか?
2-ブロモ-5-フロロ-N-(2-フェノールメチル)ベンゼンウレアは、毒性や刺激性の実験データに基づき、適切な取扱いと防護措置を講じることで安全に使用できます。...
対甲苯磺酸酯-四聚乙二醇-四氢吡喃醚の物理化学的性質は何ですか?
対甲苯磺酸酯-四聚乙二醇-四氢吡喃醚のCAS番号は86259-89-4です。この化合物は無色の液体で、分子量は約724.8です。高濃度では溶血性が報告されており...
2-(3-(二氟甲基)-4-氟苯基)-4,4,5,5-四甲基-1,3,2-二噁硼戊環はどのように保存すればよいですか?
2-(3-(二氟甲基)-4-氟苯基)-4,4,5,5-四甲基-1,3,2-二噁硼戊環は、室温で暗い場所に保管し、直射日光から遠ざけ、容器は密閉状態で保存してくだ...
6-アミノ-5-クロロ-2-シクロプロピルピリミジンカルボン酸の代替品はありますか?
この化合物の代替品には、ピロリミジン酸やその類似物、またピロリミジンカルボン酸の他の異性体があります。これらの代替品は、特定の化学反応や目的に応じて選択すること...
5-クロロベンゾ[1,3]二オキセイン-4-アミンに適用される法規ガイドラインは何ですか?
5-クロロベンゾ[1,3]二オキセイン-4-アミンはCAS番号379228-45-2に該当します。この化合物はGHS分類でH314(接触により急性毒性がある)と...















