Salting-out-assisted liquid–liquid extraction of 5-hydroxymethylfurfural from honey and the determination of 5-hydroxymethylfurfural by high-performance liquid chromatography
文献情報
Wenbin Chen, Siyuan Wu, Jianing Zhang, Fengjie Yu, Xijuan Tu
5-Hydroxymethylfurfural (HMF) is an important index for evaluating the quality of honey. In the present study, the recovery of HMF via the salting-out-assisted liquid–liquid extraction (SALLE) was systematically investigated to develop a simple, rapid, and effective method for the determination of HMF in honey. Results indicated that at the concentration of 70 : 30 (acetonitrile : H2O, v/v), sodium carbonate showed the best recovery of HMF from honey with the 0.5 g addition amount of salt. Compared with two other homogenous liquid–liquid extraction methods, i.e. subzero temperature-assisted liquid–liquid extraction and hydrophobic solvent-assisted liquid–liquid extraction, SALLE showed an advantage of higher recovery for HMF. In addition, fructose and glucose were analyzed to investigate the residue of sugars in the extractive. Results demonstrated that the SALLE method could dramatically reduce the residual contents of these two sugars. In addition, SALLE showed the advantages of less consumption of samples and extraction solvents. Finally, the developed method was fully validated and applied for real honey samples. The analysis results obtained using the present method were comparable to those obtained using the official method; this indicated that the proposed method could be used as an alternative method for the routine quality control of HMF in honey.
関連文献
Kinetics of hydrogen abstraction reactions of CF3CHO, CF2ClCHO, CFCl2CHO and CCl3CHO with OH Radicals: An ab initio study
Tadafumi Uchimaru, Masaaki Sugie
DOI: 10.1039/B104904F
Hydride shift in substituted phenyl glyoxals: Interpretation of experimental rate data using electronic structure and variational transition state theory calculations
Gary Tresadern, Julie Willis, Ian H. Hillier, C. Ian F. Watt
DOI: 10.1039/B102330F
Apparent and partial ideal molar isentropic compressibilities of binary liquid mixtures
Michael I. Davis, Gérard Douhéret, João Carlos R. Reis, Michael J. Blandamer
DOI: 10.1039/B104974G
The electronic spectrum of C11 in its linear and cyclic conformation
Max Mühlhäuser, George E. Froudakis, Sigrid D. Peyerimhoff
DOI: 10.1039/B103528M
Theoretical study of the hydrogen abstraction reactions for CH3R + Cl → CH2R + HCl (R = Cl and Br)
Jing-Fa Xiao, Ze-Sheng Li, Yi-Hong Ding, Jing-Yao Liu, Xu-Ri Huang, Chia-Chung Sun
DOI: 10.1039/B104667P
Dynamic colloidal interactions between protein-stabilised particles—experiment and simulation
Herley Casanova, Jianshe Chen, Eric Dickinson, Brent S. Murray, Phillip V. Nelson, Martin Whittle
DOI: 10.1039/B004023L
こちらもおすすめ
S-(甲硅烷基丙基)異硫酰氯を取り扱う際の実験室安全事項は何ですか?
取り扱う際にはPPE(防護具)が必要です。特に手袋と面マスクは必須です。ドラフトチャンバーを使用して漏洩処理を行い、温度は常温、湿度は乾燥状態、容器はガラス容器...
8-硝基-咪唑并[1,2-a]吡啶とは何ですか?
8-硝基-咪唑并[1,2-a]吡啶は、CAS番号52310-46-0の化合物で、8-位に硝基を有する咪唑並みの结构をもつ吡啶の化合物です。この化合物は、酸化還元...
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品はありますか?
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品には、類似構造を持つ化合物や機能性に等しい代替試薬があります。例えば、4-クロロ-5-メトキシピリジン-2-甲...
全氟-1,2-二甲基環己烷を含む廃棄物はどのように処理すべきですか?
全氟-1,2-二甲基環己烷(CAS番号:306-98-9)の廃棄物は、特別な処理が必要です。まず、廃棄物を密閉容器に収集し、適切な防漏容器に保管します。次に、専...
3-(溴甲基)苯乙酸の主な用途は何ですか?
3-(溴甲基)苯乙酸は主に研究用化学薬品として利用され、有機合成や医薬品の開発に用いられます。また、特定の化合物の合成中間体としても使用されることがあります。
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンはどのように保存すればよいですか?
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンは冷暗所で密栓の容器に保存し、直射日光を避けて保管することをお勧めします。温度は常温とし、湿気を...
1-(2-溴-6-甲氧基苯基)乙酮を取り扱う際の実験室安全事項は何ですか?
実験室では、1-(2- Bromo-6-methoxyphenyl)ethanoneを取り扱う際には、ゴーグルや面具、手袋などのPPEを使用することが推奨されま...
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは安全ですか?
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは一般に安全ですが、取扱いには注意が必要です...
4-溴萘-1-甲酸の代替品はありますか?
4-溴萘-1-甲酸は比較的稀な化合物ですが、類似物としては、4-クロロ-1-ナフホリック酸やその他のブロモ置換ナフホリック酸が挙げられます。ただし、これらの代替...
ε-白藜芦醇脱氢二聚体の代替品はありますか?
ε-白藜芦醇脱氢二聚体の代替品としては、ε-白藜芦醇、ポリフェノール類、フラボノイド類が挙げられます。これらは類似の化学構造と生物学的活性を持っています。ただし...
掲載誌
Analytical Methods

Analytical Methods welcomes early applications of new analytical and bioanalytical methods and technology demonstrating the potential for societal impact. We require that methods and technology reported in the journal are sufficiently innovative, robust, accurate, and compared to other available methods for the intended application. Developments with interdisciplinary approaches are particularly welcome. Systems should be proven with suitably complex and analytically challenging samples. We encourage developments within, but not limited to, the following technologies and applications: global health, point-of-care and molecular diagnostics biosensors and bioengineering drug development and pharmaceutical analysis applied microfluidics and nanotechnology omics studies, such as proteomics, metabolomics or glycomics environmental, agricultural and food science neuroscience biochemical and clinical analysis forensic analysis industrial process and method development














