FeS2 microspheres wrapped by N-doped rGO from an Fe-based ionic liquid precursor for rechargeable lithium ion batteries
文献情報
Chengfeng Du, Jianrong Li, Xiaoying Huang
Earth-abundant pyrite (FeS2) is a promising anode material for lithium ion batteries (LIBs) because of its high theoretical specific capacity (894 mA h g−1). However, LIBs using pristine FeS2 usually suffer from volume expansion, dissolution of polysulfides, and low conductivity of Li2S. Herein, FeS2/N-doped reduced graphene oxide microspheres (FeS2/N-rGO) are first synthesized from an Fe-based ionic liquid, [C12MMim]FeCl4 (C12MMim = 1-dodecyl-2,3-dimethylimidazolium), which can not only be used as the metal and nitrogen source but also as an assembly medium and surfactant. As the anode material for rechargeable LIBs, the as-obtained FeS2/N-rGO composites display a specific capacity of 950 mA h g−1 after 140 cycles at a current density of 150 mA g−1 and deliver an average reversible discharge capacity of 973, 867, 778, and 671 mA h g−1 at 0.2, 0.5, 1.0, and 2.0 A g−1, respectively. Even at high current density, the specific capacity can still reach 510 mA h g−1. More importantly, after deep cycling, a high reversible capacity of 973 mA h g−1 can still be recovered when the current density reduced to 0.2 A g−1. This excellent stability and outstanding rate performance are mainly attributed to the suppression of dissolution of polysulfide intermediates and volume expansion by the conductive N-doped rGO matrix.
関連文献
Electrochemistry at nanometer-sized electrodes
Shengli Chen, Yuwen Liu
DOI: 10.1039/C3CP53773K
Hydrodeoxygenation by deuterium gas – a powerful way to provide insight into the reaction mechanisms
Glen A. Ferguson, Yunqiao Pu, Fang Huang, Mark Jarvis, Mary Biddy
DOI: 10.1039/C3CP53409J
In situ deposition of Ag–Ag2S hybrid nanoparticles onto TiO2 nanotube arrays towards fabrication of photoelectrodes with high visible light photoelectrochemical properties
Wenguang Fan, Simon Jewell, Yiyi She, Michael K. H. Leung
DOI: 10.1039/C3CP54098G
Strain relaxation and order–disorder phase transition in irradiated MgAl2O4
DOI: 10.1039/C3CP53532K
High redox and performance stability of layered SmBa0.5Sr0.5Co1.5Cu0.5O5+δ perovskite cathodes for intermediate-temperature solid oxide fuel cells
Areum Jun, Jeeyoung Shin, Guntae Kim
DOI: 10.1039/C3CP53883D
Electrofluorescence switching from a multilayer thin film by spin-assisted layer-by-layer assembly of an anionic fluorescent conjugated polyelectrolyte with poly(diallyldimethylammonium chloride)
Cheng-Po Kuo
DOI: 10.1039/C3CP53912A
Rational design, characterization and catalytic application of metal clusters functionalized with hydrophilic, chiral ligands: a proof of principle study
Patrick Schreiber, Martin Ludwig, Mark M. Maturi, Olaf Ackermann, Martin Tschurl, Ueli Heiz
DOI: 10.1039/C3CP53626B
Absolute density measurement of SD radicals in a supersonic jet at the quantum-noise-limit
Arin Mizouri, L. Z. Deng, Jack S. Eardley, N. Hendrik Nahler, Eckart Wrede
DOI: 10.1039/C3CP53394H
Vibrationally resolved absorption, emission and resonance Raman spectra of diamondoids: a study based on time-dependent correlation functions
Shiladitya Banerjee, Peter Saalfrank
DOI: 10.1039/C3CP53535E
Study of underpotential deposited Cu layers on Pt(111) and their stability against CO and CO2 in perchloric acid
Christian Schlaup, Sebastian Horch
DOI: 10.1039/C3CP52649F
こちらもおすすめ
カルボニル基が付いた5-氰基-1-{[(2-メチル-2-プロpanyl)オキシ]カーボンイル}1H-吲哚-2-イリド-2-ボリン酸はどのように保存すればよいですか?
カルボニル基が付いた5-氰基-1-{[(2-メチル-2-プロpanyl)オキシ]カーボンイル}1H-吲哚-2-イリド-2-ボリン酸は、直射日光を避けて室温(15...
tert-ブチル2-クロロメチルピリジン-3-基炭酸エステルの市場動向や研究トレンドはどうですか?
この化合物は合成化学分野において、特にピリジン化合物の合成や改良に用いられます。最近の研究では、ピリジン化合物の新規合成法や特性の改良が注目されています。市場動...
聚二季戊四醇六丙烯酸酯はどの業界で使用されていますか?
聚二季戊四醇六丙烯酸酯は、医薬品、ポリマー、センサー、半導体などの業界で広く使用されています。特にポリマー業界では硬化剤として、医薬分野では医療機器の製造に使用...
1-氯-5-硝基异喹啉の市場動向や研究トレンドはどうですか?
1-氯-5-硝基异喹啉は、薬理学や合成化学の研究分野で注目されています。市場動向としては、その生物学的な活性や合成可能性を評価する研究が増えています。また、代替...
2-チロール-5-メチルスルフェニル-3-trifルオルメチルベンゼンはどのように合成されますか?
2-チロール-5-メチルスルフェニル-3-trifルオルメチルベンゼンは、トリフルオロメチル化反応と硫化反応を経て合成されます。通常、トリフルオロメチル化剤と硫...
p-トールイルマグネシウムブロミドの物理化学的性質は何ですか?
p-トールイルマグネシウムブロミドのCAS番号は4294-57-9です。この化合物は白色の結晶性粉末で、分子量は204.32です。溶剤中で良好に溶解しますが、水...
1-(5-甲基-2-硫化素基)プロパン-1-酮の市場動向や研究トレンドはどうですか?
1-(5-甲基-2-硫化素基)プロパン-1-酮の市場動向は、化学産業全体の需要に影響を受けますが、最近では pharmaceutical 分野での応用が注目され...
十一碳烯酰甘氨酸を取り扱う際の実験室安全事項は何ですか?
十一碳烯酰甘氨酸は吸入や皮膚から吸収されることがあり、取り扱う際には防塵マスクと手袋を使用してください。ドラフトチャンバーを用いて漏洩を処理し、適切なSDS(S...
1H,1H-全氟-3,6-二氧杂葵-1-醇を取り扱う際の実験室安全事項は何ですか?
この化合物は吸入や皮膚吸収による毒性があるため、防塵マスク、ゴーグル、防護手袋を使用する必要があります。ドラフトチャンバーでの操作が必要です。漏洩時には即座に換...
3-(4-(フルオロメチルオキシ)フェニル)-1,2,4-オキサジアゾール-5-カルボハイドライドは安全ですか?
安全性は化合物の使用方法によります。直接的な毒性は報告されていませんが、吸入や皮膚接触には注意が必要です。適切な防護服を着用し、換気を図ることを推奨します。












![(3-{[4-(Aminomethyl)-6-(trifluoromethyl)-2-pyridinyl]oxy}phenyl)[(3R,4R)-3-fluoro-4-hydroxy-1-pyrrolidinyl]methanone structure (3-{[4-(Aminomethyl)-6-(trifluoromethyl)-2-pyridinyl]oxy}phenyl)[(3R,4R)-3-fluoro-4-hydroxy-1-pyrrolidinyl]methanone structure](https://static.chemtradehub.com/structs/200/2007885-39-2-affc.webp)


