Facile construction of crosslinked anion exchange membranes based on fluorenyl-containing polysulfone via click chemistry

文献情報

出版日 2017-06-27
DOI 10.1039/C7PY00789B
インパクトファクター 5.582
著者

Bo Hu, Luyang Miao, Yang Bai, Changli Lü


原文を見る

要旨

A series of fluorenyl-containing polysulfone-based crosslinked anion exchange membranes with high conductivity and excellent stability were fabricated via click chemistry. Azide groups were firstly introduced into the side chains of fluorenyl-containing polysulfone via the quaternization reaction, and then the designed bifunctional crosslinking agents containing alkyne groups with different lengths and polarities (hydrophilicity) were used to construct the crosslinked structure via the click reaction between azides and alkynes. The degree of crosslinking of membranes can be adjusted by controlling the content of the crosslinking agent. The proper crosslinking of AEMs in this work can tighten the internal packing structure of membranes, which could not only enhance the mechanical strength of AEMs but also improve the fuel permeability, alkaline resistance and oxidative stability of membranes. The water uptake and swelling ratio of the crosslinked AEMs were also improved with the increase of polarity and length of crosslinking agents. The hydroxide conductivity of d-CPFSU-1 was not decreased by crosslinking rather it increased to 193.95 mS cm−1 at 80 °C due to the formation of a uniform nano-micro phase separation structure. Our study showed that AEMs with enhanced performance can be achieved by the design of crosslinking within the control of the micro-phase structure.

関連文献

Well-defined star-shaped calcite crystals formed in agarose gels

Dong Yang, Limin Qi, Jiming Ma

2003-04-16 Communication

DOI: 10.1039/B301197F

Non-aggregating octasubstituted dendritic phthalocyanines

Casey A. Kernag, Dominic V. McGrath

2003-04-03 Communication

DOI: 10.1039/B301157G

Bond energy M–C/H–C correlations: dual theoretical and experimental approach to the sensitivity of M–C bond strength to substituents

Eric Clot, Maria Besora, Feliu Maseras, Claire Mégret, Odile Eisenstein, Beatriz Oelckers, Robin N. Perutz

2003-01-24 Communication

DOI: 10.1039/B210036N

Polyoxometalate-catalysed epoxidation of 1-octene with hydrogen peroxide in microemulsions coupled with ultrafiltration

Arnold Lambert, Pawel Plucinski, Ivan V. Kozhevnikov

2003-02-17 Communication

DOI: 10.1039/B300494P

Construction of extended networks with a trimeric pyrazole synthon

Ishtvan Boldog, Eduard B. Rusanov, Joachim Sieler, Steffen Blaurock, Konstantin V. Domasevitch

2003-02-25 Communication

DOI: 10.1039/B212540D

Control of Al distribution in ZSM-5 by conditions of zeolite synthesis

2003-04-23 Communication

DOI: 10.1039/B301634J

Anion-directed assembly: the first fluoride-directed double helix

Simon J. Coles, Jeremy G. Frey, Philip A. Gale, Michael B. Hursthouse, Mark E. Light, Korakot Navakhun, Gemma L. Thomas

2003-02-04 Communication

DOI: 10.1039/B210847J

Novel and efficient chiral sulfideoxathiane ligands for palladium-catalyzed asymmetric allylic alkylation

Yuko Okuyama, Hiroto Nakano, Kouichi Takahashi, Hiroshi Hongo, Chizuko Kabuto

2003-01-17 Communication

DOI: 10.1039/B211031H

こちらもおすすめ

化合物よくある質問

2-ブロモ-9,9-ジフェニル-9H-フルオレンの主な用途は何ですか?

2-溴-9,9-二苯基芴は、医薬品、工業材料、有機合成の研究分野で応用されます。特に、レーザー材料や機能性ポリマーの合成に使用されることがあります。また、蛍光色...

474918-32-62-Bromo-9,9-diphenyl...
化合物よくある質問

四氯化铱の市場動向や研究トレンドはどうですか?

四氯化铱の市場は研究開発分野で注目されており、特にナノ技術や金属有機框架(MOFs)の分野での需要が増加傾向にあります。価格は安定しており、中国や韓国での生産が...

207399-11-9Tetrachloroiridium h...
化合物よくある質問

4-硝基肉桂酸はどの業界で使用されていますか?

4-硝基肉桂酸は主に医薬品業界で使用されています。また、センサー開発や半導体製造業界でも応用されています。

882-06-44-Nitrocinnamic acid
化合物よくある質問

1-(4-溴-3-氟苯基)-2-氯乙酮を含む廃棄物はどのように処理すべきですか?

1-(4-溴-3-氟苯基)-2-氯乙酮 (CAS番号: 1260857-14-4) の廃棄物は専門的な廃棄処理が必要です。まず、廃棄物は密閉された容器に収集し、...

1260857-14-41-(4-Bromo-3-fluorop...
化合物よくある質問

苦参酚Kとは何ですか?

苦参酚Kは、CAS番号101236-49-1を持つ化合物で、主に天然由来の生薬から抽出されます。この化合物は、抗炎症作用や抗癌作用を持つことが報告されています。

101236-49-1Kushenol K
化合物よくある質問

POTASSIUM (1-(TERTBUTOXYCARBONYL)AZETIDIN-3-YL)TRIFLUOROBORATE を含む廃棄物はどのように処理すべきですか?

POTASSIUM (1-(TERTBUTOXYCARBONYL)AZETIDIN-3-YL)TRIFLUOROBORATE を含む廃棄物は、まず安全なエント...

1430219-73-0Potassium (1-(tert-b...
化合物よくある質問

4-庚基-4’-联苯羧酸の市場動向や研究トレンドはどうですか?

4-庚基-4’-聯苯羧酸は、特殊化学品や合成化学の分野で用いられる化学物質ですが、市場動向としては、研究開発の進展とともに需要が増加しています。また、環境配慮型...

58573-94-74'-Heptyl-4-biphenyl...
化合物よくある質問

6-ブロモ-3-メトキシ-1-フェニル-1H-インドゾールを含む廃棄物はどのように処理すべきですか?

6-ブロモ-3-メトキシ-1-フェニル-1H-インドゾールを含む廃棄物は、適切な化学廃棄処理が必要です。通常、廃棄物は密閉容器に収集され、専門の廃棄処理業者に引...

1332527-03-36-Bromo-3-methoxy-1-...
化合物よくある質問

4,4-二甲基-2-吡咯烷酮はどの業界で使用されていますか?

4,4-二甲基-2-吡咯烷酮は医薬、ポリマー、センサー、半導体などの業界で広く使用されています。特に溶媒としての性能が高く評価されています。

66899-02-34,4-dimethylpyrrolid...
化合物よくある質問

リン酸鉍はどのように保存すればよいですか?

リン酸鉍は遮光容器に保存し、乾燥した場所で常温で保管してください。

51312-42-6Sodium Phosphotungst...

掲載誌

Polymer Chemistry

Polymer Chemistry
CiteScore: 8.6
自己引用率: 7.3%
年間論文数: 457

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.

おすすめ化合物

おすすめサプライヤー

免責事項
このページに表示される学術雑誌情報は、参考および研究目的のみを目的としています。当社は雑誌出版社とは提携しておらず、投稿の取り扱いも行っておりません。出版に関するお問い合わせは、各雑誌出版社に直接ご連絡ください。
表示されている情報に誤りがある場合は、support@chemtradehub.com までご連絡ください。迅速に確認し、対応いたします。