Comparative studies on conventional and solvent-free synthesis toward hydrazones: application of PXRD and chemometric data analysis in mechanochemical reaction monitoring
文献情報
Jana Pisk, Tomica Hrenar, Mirta Rubčić, Gordana Pavlović, Vladimir Damjanović, Jasna Lovrić, Marina Cindrić, Višnja Vrdoljak
Synthesis of hydrazones was performed via both conventional and solvent-free routes using the corresponding hydrazide (isonicotinic hydrazide, nicotinic hydrazide, 2-aminobenzhydrazide or 4-aminobenzhydrazide) and appropriate aldehyde (salicylaldehyde, 3-methoxysalicylaldehyde or 4-methoxysalicylaldehyde). A systematic study dedicated to solvatomorphism or polymorphism screening resulted in the formation of twelve novel crystalline forms, and eight of these were characterized via the single crystal X-ray diffraction method. In all studied structures, the molecules were assembled into endless supramolecular chains, discrete rings, chains of rings or nets. The mechanochemical synthesis employing liquid-assisted grinding was also applied and the nicotinic- and isonicotinic-based hydrazones were found to form readily from their corresponding precursors. The chemometric study using principal component analysis for mechanochemical synthesis monitoring was implemented for the first time to provide an insight into the reaction profiles. A thoughtful combination of ex situ powder X-ray diffraction and chemometric analysis was essential to identify a stepwise mechanism for the hydrazone formation via an intermediate phase. In five investigated reactions the first principal component accounted for at least 75% of the total variance, whereas in the case of two reactions this component accounted for 69.72 and 46.23% of the total variance. The hydrazones were also evaluated for cytotoxic activity in vitro. All compounds exhibited weak to moderate cytotoxicity against THP-1 and no cytotoxicity against HepG2 cells. Substantial antibacterial activity was obtained against Moraxella catarrhalis while no growth inhibition of Staphylococcus aureus, Enterococcus faecalis and Escherichia coli was observed.
関連文献
An ε-caprolactone-derived 2-oxazoline inimer for the synthesis of graft copolymers
Jungyeon Kim, Christopher Waldron, Beatrice Cattoz, C. Remzi Becer
DOI: 10.1039/D0PY01092H
Functionalization of polyisoprene and polystyrene via reactive processing using azidoformate grafting agents, and its application to the synthesis of dioxaborolane-based polyisoprene vitrimers
Antoine Breuillac, Florent Caffy, Thomas Vialon, Renaud Nicolaÿ
DOI: 10.1039/D0PY00164C
Natural cyclodextrins and their derivatives for polymer synthesis
Magdalena A. Przybyla, Gokhan Yilmaz, C. Remzi Becer
DOI: 10.1039/D0PY01464H
Tales of the unexpected. The non-random statistical copolymerisation of myrcene and styrene in the presence of a polar modifier
Lloyd Shaw, Lian R. Hutchings
DOI: 10.1039/D0PY01099E
Stimuli-responsive non-ionic Gemini amphiphiles for drug delivery applications
Rashmi, Abhishek K. Singh, Katharina Achazi, Christoph Böttcher, Rainer Haag, Sunil K. Sharma
DOI: 10.1039/D0PY01040E
Design and mechanical properties of supramolecular polymeric materials based on host–guest interactions: the relation between relaxation time and fracture energy
Subaru Konishi, Yu Kashiwagi, Go Watanabe, Takuya Katashima, Osamu Urakawa, Akira Harada
DOI: 10.1039/D0PY01347A
Photocontrolled cationic degenerate chain transfer polymerizations via thioacetal initiators
Renee J. Sifri, Audrey J. Kennedy, Brett P. Fors
DOI: 10.1039/D0PY01100B
こちらもおすすめ
S-(甲硅烷基丙基)異硫酰氯を取り扱う際の実験室安全事項は何ですか?
取り扱う際にはPPE(防護具)が必要です。特に手袋と面マスクは必須です。ドラフトチャンバーを使用して漏洩処理を行い、温度は常温、湿度は乾燥状態、容器はガラス容器...
8-硝基-咪唑并[1,2-a]吡啶とは何ですか?
8-硝基-咪唑并[1,2-a]吡啶は、CAS番号52310-46-0の化合物で、8-位に硝基を有する咪唑並みの结构をもつ吡啶の化合物です。この化合物は、酸化還元...
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品はありますか?
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品には、類似構造を持つ化合物や機能性に等しい代替試薬があります。例えば、4-クロロ-5-メトキシピリジン-2-甲...
全氟-1,2-二甲基環己烷を含む廃棄物はどのように処理すべきですか?
全氟-1,2-二甲基環己烷(CAS番号:306-98-9)の廃棄物は、特別な処理が必要です。まず、廃棄物を密閉容器に収集し、適切な防漏容器に保管します。次に、専...
3-(溴甲基)苯乙酸の主な用途は何ですか?
3-(溴甲基)苯乙酸は主に研究用化学薬品として利用され、有機合成や医薬品の開発に用いられます。また、特定の化合物の合成中間体としても使用されることがあります。
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンはどのように保存すればよいですか?
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンは冷暗所で密栓の容器に保存し、直射日光を避けて保管することをお勧めします。温度は常温とし、湿気を...
1-(2-溴-6-甲氧基苯基)乙酮を取り扱う際の実験室安全事項は何ですか?
実験室では、1-(2- Bromo-6-methoxyphenyl)ethanoneを取り扱う際には、ゴーグルや面具、手袋などのPPEを使用することが推奨されま...
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは安全ですか?
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは一般に安全ですが、取扱いには注意が必要です...
4-溴萘-1-甲酸の代替品はありますか?
4-溴萘-1-甲酸は比較的稀な化合物ですが、類似物としては、4-クロロ-1-ナフホリック酸やその他のブロモ置換ナフホリック酸が挙げられます。ただし、これらの代替...
ε-白藜芦醇脱氢二聚体の代替品はありますか?
ε-白藜芦醇脱氢二聚体の代替品としては、ε-白藜芦醇、ポリフェノール類、フラボノイド類が挙げられます。これらは類似の化学構造と生物学的活性を持っています。ただし...
掲載誌
CrystEngComm

CrystEngComm is the forum for the design and understanding of crystalline materials. We welcome studies on the investigation of molecular behaviour within crystals, control of nucleation and crystal growth, engineering of crystal structures, and construction of crystalline materials with tuneable properties and functions. We publish hypothesis-driven research into… how crystal design affects thermodynamics, phase transitional behaviours, polymorphism, morphology control, solid state reactivity (crystal-crystal solution-crystal, and gas-crystal reactions), optoelectronics, ferroelectric materials, non-linear optics, molecular and bulk magnetism, conductivity and quantum computing, catalysis, absorption and desorption, and mechanical properties. Using Techniques and methods including… Single crystal and powder X-ray, electron, and neutron diffraction, solid-state spectroscopy, spectrometry, and microscopy, modelling and data mining, and empirical, semi-empirical and ab-initio theoretical evaluations. On crystalline and solid-state materials. We particularly welcome work on MOFs, coordination polymers, nanocrystals, host-guest and multi-component molecular materials. We also accept work on peptides and liquid crystals. All papers should involve the use or development of a design or optimisation strategy. Routine structural reports or crystal morphology descriptions, even when combined with an analysis of properties or potential applications, are generally considered to be outside the scope of the journal and are unlikely to be accepted.














