A new family of thermoplastic photoluminescence polymers
文献情報
Xiaohong Zhang, Wenbo Song, Zhenjie Liu, Huasheng Feng, Bin Wang, Mingming Guo, Xiang Wang, Chunxia Luo, Wantai Yang, Yongfang Li
In order to overcome the drawback of traditional photoluminescence materials, which are usually opaque, expensive and non-thermoplastic, a new family of photoluminescence alternate copolymers made from maleic anhydride and different olefin derivatives with very low cost have been developed and are reported in this paper. The new photoluminescence polymers are all transparent-thermoplastic fluorescence polymers and the photoluminescence polymers made from maleic anhydride and styrene or its derivatives are all phosphorescence polymers, which are the first reported family of phosphorescence polymers without traditional luminous groups. A transparent and thermoplastic photoluminescence material with low cost has been a dream of both academia and industry for many years because it is an extremely important material for agriculture, LEDs, organic optoelectronics, anti-counterfeiting materials, coatings, illuminants, displays and many other areas; therefore, it is believed that this new family of photoluminescence polymers can contribute greatly to the sustainable development of our society.
関連文献
Adsorption of sulfur dioxide on hematite and goethite particle surfaces
Jonas Baltrusaitis, Vicki H. Grassian
DOI: 10.1039/B709167B
Transient behavior of an electrolytic diode
Zdeněk Slouka, Michal Přibyl, Dalimil Šnita, Tomáš Postler
DOI: 10.1039/B707197C
Synthesis, characterization, and intracellular uptake of carboxyl-terminated poly(amidoamine) dendrimer-stabilized iron oxide nanoparticles
Xiangyang Shi, Thommey P. Thomas, Lukasz A. Myc, Alina Kotlyar, James R. Baker, Jr
DOI: 10.1039/B709147H
Small angle X-ray scattering measurements probe water nanodroplet evolution under highly non-equilibrium conditions
Barbara E. Wyslouzil, Gerald Wilemski, Reinhard Strey, Soenke Seifert, Randall E. Winans
DOI: 10.1039/B709363B
Dissociative electron attachment to gas phase glycine: Exploring the decomposition pathways by mass separation of isobaric fragment anions
A. Mauracher, S. Denifl, A. Aleem, N. Wendt, F. Zappa, P. Cicman, M. Probst, T. D. Märk, P. Scheier, H. D. Flosadóttir, O. Ingólfsson, E. Illenberger
DOI: 10.1039/B709140K
Solute–solvent interactions in imidazolium camphorsulfonate ionic liquids
Kaoru Nobuoka, Satoshi Kitaoka, Masashi Iio, Thomas Harran, Yuichi Ishikawa
DOI: 10.1039/B709407H
Kinetic analysis of the ozone processing of an unsaturated organic monolayer as a model of an aerosol surface
Erick González-Labrada, Rolf Schmidt, Christine E. DeWolf
DOI: 10.1039/B707890K
Binding free energy prediction in strongly hydrophobic biomolecular systems
Landry Charlier, Claude Nespoulous, Sébastien Fiorucci, Serge Antonczak, Jérome Golebiowski
DOI: 10.1039/B710186D
Theory and computation of nuclear magnetic resonance parameters
Juha Vaara
DOI: 10.1039/B706135H
こちらもおすすめ
2,5-二羧基氟苯の市場動向や研究トレンドはどうですか?
2,5-二羧基氟苯の市場は、主に医薬品および農薬の研究開発において伸長しています。一方、環境への影響や安全性の懸念から、その使用は一定の制限が置かれています。今...
8-甲基-2-噻吩-2-基-喹啉-4-羧酸を含む廃棄物はどのように処理すべきですか?
8-甲基-2-噻吩-2-基-喹啉-4-羧酸を含む廃棄物は専門的な廃棄処理が必要です。具体的には、廃棄物は密閉の容器に収集し、適切な危険物対策を講じて専門業者に引...
2-(1,3-二氧杂烷-2-基)噻唑の物理化学的性質は何ですか?
CAS番号24295-04-3の2-(1,3-二氧杂烷-2-基)噻唑は、結晶形態により白色粉末を呈します。分子量は208.23 g/molであり、水に溶けにくい...
L-beta-高酪氨酸塩酸塩は安全ですか?
L-beta-高酪氨酸塩酸塩自体は毒性は低く、しかし使用する際は適切な個人保護具を使用し、誤飲や皮膚への接触を避けることが推奨されます。
睡茄灯笼草素Cはどのように合成されますか?
睡茄灯笼草素Cは、シクラメンケチャナfromaceaeから抽出する方法や、化学合成法で合成することができます。典型的な化学合成法では、3β,22-二オキシエクス...
4-(嘧啶-2-基)哌嗪-1-羧酸叔丁酯はどのように保存すればよいですか?
4-(嘧啶-2-基)哌嗪-1-羧酸叔丁酯は直射日光を避けて、室温で保存するのが良いです。湿度を避けて密閉容器に入れて保管し、未使用の状態で長期保存することができ...
NBI-74330の主な用途は何ですか?
NBI-74330は主に薬理学研究および医療用途に使用されています。その主な用途は抗がん作用を有するため、がん治療の研究に使用されています。
6-トリフルオロメチル-2-クロロピリジン-4-ボリリック酸はどのように合成されますか?
6-トリフルオロメチル-2-クロロピリジン-4-ボリリック酸は、6-トリフルオロメチル-2-クロロピリジンとボリルリチウムを触媒なしで反応させることで合成するこ...
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.














