A theoretical study of the atmospherically important radical–radical reaction BrO + HO2; the product channel O2(a1Δg) + HOBr is formed with the highest rate
文献情報
Ronald Chow, Daniel K. W. Mok, John M. Dyke
A theoretical study has been made of the BrO + HO2 reaction, a radical–radical reaction which contributes to ozone depletion in the atmosphere via production of HOBr. Reaction enthalpies, activation energies and mechanisms have been determined for five reaction channels. Also rate coefficients have been calculated, in the atmospherically important temperature range 200–400 K, for the two channels with the lowest activation energies, both of which produce HOBr: (R1a) HOBr(X1A′) + O2(X3Σ−g) and (R1b) HOBr(X1A′) + O2(a1Δg). The other channels considered are: (R2) BrO + HO2 → HBr + O3, (R3) BrO + HO2 → OBrO + OH and (R4) BrO + HO2 → BrOO + OH. For all channels, geometry optimization and frequency calculations were carried out at the M06-2X/AVDZ level, while relative energies of the stationary points on the reaction surface were improved at a higher level (BD(TQ)/CBS or CCSD(T)/CBS). The computed standard reaction enthalpies (ΔHRX298K) for channels (R1a), (R1b), (R2), (R3) and (R4) are −47.5, −25.0, −4.3, 14.9 and 5.9 kcal mol−1, and the corresponding computed activation energies (ΔE) are 2.53, −3.07, 11.83, 35.0 and 37.81 kcal mol−1. These values differ significantly from those obtained in earlier work by Kaltsoyannis and Rowley (Phys. Chem. Chem. Phys., 2002, 4, 419–427), particularly for channel (R1b), and reasons for this are discussed. In particular, the importance of obtaining an open-shell singlet wavefunction, rather than a closed-shell singlet wavefunction, for the transition state of this channel is emphasized. Rate coefficient calculations from computed potential energy surfaces were made for BrO + HO2 for the first time. Although channel (R1a) is the most exothermic, channel (R1b) has the lowest barrier height, which is negative (at −3.07 kcal mol−1). Most rate coefficient calculations were therefore made for (R1b). A two transition state model has been used, involving an outer and an inner transition state. The inner transition state was found to be the major bottleneck of the reaction with the outer transition state having essentially no effect on the overall rate coefficient (k) in the temperature range considered. Studying the entropy, enthalpy and free energy of activation of this channel as a function of temperature shows that the main contributor to the magnitude of ln k at a selected temperature is the entropy term (ΔS#/kB) whereas the temperature dependence of ln k is determined mainly by the enthalpy term (−ΔH#/kBT). This compares with reactions with positive barrier heights where the enthalpy term makes a bigger contribution to ln k. Comparison of the computed rate coefficients with available experimental values shows that the computed values have a negative temperature dependence, as observed experimentally, but are too low by approximately an order of magnitude at any selected temperature in the range 200–400 K.
関連文献
Comparative investigation of the performances of hematite nanoplates and nanograins in lithium-ion batteries
Fengqi Lu, Qili Wu, Xianfeng Yang, Liqiao Chen, Junjie Cai, Chaolun Liang, Mingmei Wu, Peikang Shen
DOI: 10.1039/C3CP50619C
Tuning the Förster overlap integral: energy transfer over 20 Ångstroms from a pyrene-based donor to borondipyrromethene (Bodipy)
Dan Bai, Andrew C. Benniston, Jerry Hagon, Helge Lemmetyinen, Nikolai V. Tkachenko, Ross W. Harrington
DOI: 10.1039/C3CP50173F
Hydrogenolysis of ethylene glycol to methanol over modified RANEY® catalysts
Cheng-Tar Wu, Jin Qu, Joseph Elliott, Kai Man Kerry Yu, Shik Chi Edman Tsang
DOI: 10.1039/C3CP51619A
The binding and fluorescence quenching efficiency of nitroaromatic (explosive) vapors in fluorescent carbazole dendrimer thin films
Paul E. Shaw, Hamish Cavaye, Simon S. Y. Chen, Ian R. Gentle, Paul L. Burn
DOI: 10.1039/C3CP51372F
STM tip-assisted single molecule chemistry
Aidi Zhao, Shijing Tan, Bin Li, Bing Wang, Jinlong Yang, J. G. Hou
DOI: 10.1039/C3CP51446C
Stability and electronic properties of ultrathin films of silicon and germanium
Dimitrios Kaltsas, Leonidas Tsetseris
DOI: 10.1039/C3CP50944C
Deuterium isotope effects in the polyatomic reaction of O(1D2) + CH4 → OH + CH3
Yoshihiro Ogi, Hiroshi Kohguchi
DOI: 10.1039/C3CP51680F
The detailed characterization of electrochemically switchable molecular assemblies on silicon electrodes
Simone Ciampi, Michael James, Moinul H. Choudhury, Nadim A. Darwish, J. Justin Gooding
DOI: 10.1039/C3CP50355K
Ab initio calculations of the optical absorption spectra of C60-conjugated polymer hybrids
Peter D. Haynes
DOI: 10.1039/C3CP52043A
Charging a supercapacitor-like laminate with ambient moisture: from a humidity sensor to an energy harvester
Indrek Must, Urmas Johanson, Friedrich Kaasik, Inga Põldsalu, Andres Punning, Alvo Aabloo
DOI: 10.1039/C3CP51526E
こちらもおすすめ
(S)-四氢呋喃-3-羧酸の物理化学的性質は何ですか?
CAS番号168395-26-4の(S)-四氢呋喃-3-羧酸は、白色の結晶が特徴的な性質を持ちます。分子量は128.08であり、水に溶けやすく、アルコールなど...
塩基性硫黄化合物1,3-ジメチル-1-[5-(三氟甲基)-1,3,4-硫杂环己二酮-2-基]尿素を含む廃棄物はどのように処理すべきですか?
塩基性硫黄化合物1,3-ジメチル-1-[5-(三氟甲基)-1,3,4-硫杂环己二酮-2-基]尿素を含む廃棄物は、専門的な廃棄処理施設で焼却処理を行うべきです。ま...
インドリジン-2-カルボン酸は安全ですか?
インドリジン-2-カルボン酸は一般的に安全ですが、過度に濃い状態では刺激性があります。取り扱いには適切な防護具を使用し、直接触れや吸入を避ける必要があります。
5-甲基-2-(3-ピリジニル)-1,3-テイゾール-4-オールの市場動向や研究トレンドはどうですか?
5-甲基-2-(3-ピリジニル)-1,3-テイゾール-4-オールは、医薬品や農薬、および合成化学の分野において研究が進められています。市場動向としては、化学物質...
4,4',4''-(嘧啶-2,4,6-三基)三苯甲醛はどのように保存すればよいですか?
4,4',4''-(嘧啶-2,4,6-三基)三苯甲醛は、密閉容器に保管し、避けておくことが重要です。室温で保管し、直射日光を避けてください。
(3aR)-1,3,3-トリフェニルテトラヒドロ-3H-ピロロ[1,2-c][1,3,2]-オキザボロロールについて、適用される法規ガイドラインは何ですか?
(3aR)-1,3,3-トリフェニルテトラヒドロ-3H-ピロロ[1,2-c][1,3,2]-オキザボロロールは、GHS(国際危険物識別ルール)の分類が適用されま...
6-(4-氯苯氧基)吡啶-3-胺の代替品はありますか?
6-(4-氯苯氧基)吡啶-3-胺の代替品としては、他の芳香族アミン化合物や類似の除草剤が考えられます。ただし、他の化合物と同様に、代替品の選択には安全性と効果性...
3-フェニル-3,4-ジヒドロ-2H-1,4-ベンゾキサジンを取り扱う際の実験室安全事項は何ですか?
3-フェニル-3,4-ジヒドロ-2H-1,4-ベンゾキサジンを取り扱う際は、防塵マスク、ゴーグル、ゴム手袋を使用し、ドラフトチャンバー内で作業することを推奨しま...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.












![[2-(Benzyloxy)-3-bromo-5-methylphenyl]boronic acid structure [2-(Benzyloxy)-3-bromo-5-methylphenyl]boronic acid structure](https://static.chemtradehub.com/structs/870/870777-20-1-24ac.webp)
![Sodium 6-amino-3-[(E)-{4-[(E)-(4-aminophenyl)diazenyl]-2-methoxy-5-methylphenyl}diazenyl]-4-hydroxy-2-naphthalenesulfonate structure Sodium 6-amino-3-[(E)-{4-[(E)-(4-aminophenyl)diazenyl]-2-methoxy-5-methylphenyl}diazenyl]-4-hydroxy-2-naphthalenesulfonate structure](https://static.chemtradehub.com/structs/294/2945-96-2-092f.webp)
