Intrinsic anisotropic crystallization of gold into microplates
文献情報
Sanju Francis, Lalit Varshney
In solution-based methods for the synthesis of crystals, capping agents provide stability to the system and are also believed to play a crucial role in producing crystals with controlled morphologies. In this study, we show that gold crystals with plate morphology can be produced without using capping ligands, chemical reducing agents or other additives by plainly exposing chloroauric acid solution to gamma radiation from a 60Co source. The crystallization occurs intrinsically at room temperature and produces bare nanocrystals which may find applications in the field of catalysis and sensors where surface exposure is of utmost importance for maximum interaction of the analyte.
関連文献
Structures and dynamic properties of the LiPF6 electrolytic solution under electric fields – a theoretical study
Man Liu, Peter J. Chimtali, Xue-bin Huang, Ru-bo Zhang
DOI: 10.1039/C9CP00561G
Elusive hypervalent phosphorus⋯π interactions: evidence for paradigm transformation from hydrogen to phosphorus bonding at low temperatures
P. K. Sruthi, Shubhra Sarkar, N. Ramanathan, K. Sundararajan
DOI: 10.1039/C9CP01925A
On the preparation and NMR spectroscopic characterization of potassium aluminium tetrahydride KAlH4
Bodo Zibrowius, Michael Felderhoff
DOI: 10.1039/C9CP01059A
Tuning the magnetism of two-dimensional hematene by ferroelectric polarization
Guangbiao Zhang, Wei Sun, Jingyu Li, Yuanxu Wang
DOI: 10.1039/C9CP01981B
Understanding the affinity of bis-exTTF macrocyclic receptors towards fullerene recognition
Joaquín Calbo, Alberto de Juan, Juan Aragó, Julia Villalva, Emilio M. Pérez, Enrique Ortí
DOI: 10.1039/C9CP01735F
Energy storage properties of a two-dimensional TiB4 monolayer
Erdong Wu, Shi Liu
DOI: 10.1039/C9CP01864F
Depletion of atmospheric organic trace gases due to their uptake by an ensemble of aqueous aerosols evolving via concurrent condensation and chemical aging
Yuri S. Djikaev, Eli Ruckenstein
DOI: 10.1039/C9CP01386E
Computational characterisation of structure and metallicity in small neutral and singly-charged cadmium clusters
Pablo Álvarez-Zapatero, Andrés Aguado
DOI: 10.1039/C9CP01814J
こちらもおすすめ
S-(甲硅烷基丙基)異硫酰氯を取り扱う際の実験室安全事項は何ですか?
取り扱う際にはPPE(防護具)が必要です。特に手袋と面マスクは必須です。ドラフトチャンバーを使用して漏洩処理を行い、温度は常温、湿度は乾燥状態、容器はガラス容器...
8-硝基-咪唑并[1,2-a]吡啶とは何ですか?
8-硝基-咪唑并[1,2-a]吡啶は、CAS番号52310-46-0の化合物で、8-位に硝基を有する咪唑並みの结构をもつ吡啶の化合物です。この化合物は、酸化還元...
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品はありますか?
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品には、類似構造を持つ化合物や機能性に等しい代替試薬があります。例えば、4-クロロ-5-メトキシピリジン-2-甲...
全氟-1,2-二甲基環己烷を含む廃棄物はどのように処理すべきですか?
全氟-1,2-二甲基環己烷(CAS番号:306-98-9)の廃棄物は、特別な処理が必要です。まず、廃棄物を密閉容器に収集し、適切な防漏容器に保管します。次に、専...
3-(溴甲基)苯乙酸の主な用途は何ですか?
3-(溴甲基)苯乙酸は主に研究用化学薬品として利用され、有機合成や医薬品の開発に用いられます。また、特定の化合物の合成中間体としても使用されることがあります。
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンはどのように保存すればよいですか?
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンは冷暗所で密栓の容器に保存し、直射日光を避けて保管することをお勧めします。温度は常温とし、湿気を...
1-(2-溴-6-甲氧基苯基)乙酮を取り扱う際の実験室安全事項は何ですか?
実験室では、1-(2- Bromo-6-methoxyphenyl)ethanoneを取り扱う際には、ゴーグルや面具、手袋などのPPEを使用することが推奨されま...
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは安全ですか?
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは一般に安全ですが、取扱いには注意が必要です...
4-溴萘-1-甲酸の代替品はありますか?
4-溴萘-1-甲酸は比較的稀な化合物ですが、類似物としては、4-クロロ-1-ナフホリック酸やその他のブロモ置換ナフホリック酸が挙げられます。ただし、これらの代替...
ε-白藜芦醇脱氢二聚体の代替品はありますか?
ε-白藜芦醇脱氢二聚体の代替品としては、ε-白藜芦醇、ポリフェノール類、フラボノイド類が挙げられます。これらは類似の化学構造と生物学的活性を持っています。ただし...
掲載誌
CrystEngComm

CrystEngComm is the forum for the design and understanding of crystalline materials. We welcome studies on the investigation of molecular behaviour within crystals, control of nucleation and crystal growth, engineering of crystal structures, and construction of crystalline materials with tuneable properties and functions. We publish hypothesis-driven research into… how crystal design affects thermodynamics, phase transitional behaviours, polymorphism, morphology control, solid state reactivity (crystal-crystal solution-crystal, and gas-crystal reactions), optoelectronics, ferroelectric materials, non-linear optics, molecular and bulk magnetism, conductivity and quantum computing, catalysis, absorption and desorption, and mechanical properties. Using Techniques and methods including… Single crystal and powder X-ray, electron, and neutron diffraction, solid-state spectroscopy, spectrometry, and microscopy, modelling and data mining, and empirical, semi-empirical and ab-initio theoretical evaluations. On crystalline and solid-state materials. We particularly welcome work on MOFs, coordination polymers, nanocrystals, host-guest and multi-component molecular materials. We also accept work on peptides and liquid crystals. All papers should involve the use or development of a design or optimisation strategy. Routine structural reports or crystal morphology descriptions, even when combined with an analysis of properties or potential applications, are generally considered to be outside the scope of the journal and are unlikely to be accepted.














