Enhanced visible radiation photopolymerization of dimethacrylates with the three component thioxanthone (CPTXO)–amine–iodonium salt system

文献情報

出版日 2014-11-27
DOI 10.1039/C4PY01561D
インパクトファクター 5.582
著者

Wayne D. Cook, Fei Chen


原文を見る

要旨

Photo-DSC and UV-visible spectroscopy were used to study the photo-curing kinetics and mechanism of the photopolymerization of dimethacrylates using three-component initiation systems consisting of 1-chloro-4-propoxy-9H-thioxanthen-9-one (CPXTO), diphenyl iodonium hexafluorophosphate (Ph2IPF6), and the aromatic N,N,3,5-tetramethyl aniline (TMA) or the aromatic-like N,N-dimethylbenzylamine or aliphatic triethylamine. The effect of monomers with different backbone flexibilities on the curing kinetics were also investigated, using aliphatic triethylene glycol dimethacrylate (TEGDMA), aliphatic nona-ethylene glycol dimethacrylate and aromatic diethoxylated bisphenol-A dimethacrylate. Photo-DSC cure kinetics studies showed that the fastest polymerization occurred when all three components were present for CPTXO/amine/Ph2IPF6 systems, and the maximum polymerization rate followed the trend: CPTXO/amine/Ph2IPF6 ≫ CPTXO/Ph2IPF6 ≥ CPTXO/amine, irrespective of the monomer or amine used. UV-visible spectroscopy studies revealed that for the TEGDMA/CPTXO/TMA, TEGDMA/CPTXO/Ph2IPF6, and TEGDMA/CPTXO/TMA/Ph2IPF6 systems, the CPTXO was rapidly photobleached at its absorption maximum (near 385 nm) during the photo-DSC timescale with photobleaching rates which followed the trend: CPTXO/TMA ≫ CPTXO/Ph2IPF6 ≈ CPTXO/TMA/Ph2IPF6. At the same time, a new absorption at 500 nm appeared for the systems containing CPTXO and Ph2IPF6, and the rate of this photodarkening behavior was greater for the CPTXO/Ph2IPF6 system compared with CPTXO/TMA/Ph2IPF6, – no photodarkening at 500 nm was found for the CPTXO/TMA system. Based on the curing kinetics, photobleaching studies and the thermodynamic feasibility it is proposed that for the three-component CPTXO/amine/Ph2IPF6 system, the reaction involves two main pathways. The first is the irreversible oxidation of the excited CPTXO molecule by Ph2IPF6 with the formation of a thioxanthone radical cation and a phenyl radical by an electron-transfer mechanism, followed by H-transfer between a thioxanthone radical cation and amine (or monomer) to form an aminoalkyl radical and to also regenerate CPTXO. The second pathway involves the reduction of the excited CPTXO molecule by the amine to form ketyl and aminoalkyl radicals, followed by the irreversible oxidation of the amine and the ketyl radicals by the iodonium salt, to form an initiating radical and also to regenerate CPTXO. Due to the non-reversible oxidation of the CPTXO and amine radicals by the iodonium salt (which prevents the back-electron transfer of amine to the excited CPTXO), due to the CPTXO regeneration reactions and due to the removal of the potentially terminating CPTXO radical, the efficiency of the CPTXO/TMA/Ph2IPF6 photoinitiating system is dramatically enhanced.

関連文献

Thermodynamics of amyloid fibril formation from chemical depolymerization

Nicola Vettore

2019-11-19 Paper

DOI: 10.1039/C9CP04524D

Mechanistic insights into the phenomena of increasing capacity with cycle number: using pulsed-laser deposited MoO2 thin film electrodes

Michael Fenech, Sean Lim, Jeffrey Cheung, Neeraj Sharma

2019-11-02 Paper

DOI: 10.1039/C9CP05718H

An effective partial charge model for bulk and surface properties of cubic ZrO2, Y2O3 and yttrium-stabilised zirconia

Thomas S. Hofer, Franziska M. Kilchert, Bagas A. Tanjung

2019-11-06 Paper

DOI: 10.1039/C9CP04307A

Lévy distributions and disorder in excitonic spectra

2020-10-01 Paper

DOI: 10.1039/D0CP03055D

Addition of carbon-centered radicals to aromatic antioxidants: mechanistic aspects

Janusz M. Gebicki

2020-10-19 Paper

DOI: 10.1039/D0CP04469E

Site energy distribution of sodium ions in a sodium rubidium borate glass

Martin Schäfer, David Budina, Karl-Michael Weitzel

2019-11-21 Paper

DOI: 10.1039/C9CP05194E

Fission of charged nano-hydrated ammonia clusters – microscopic insights into the nucleation processes

Bart Oostenrijk, Darío Barreiro, Noelle Walsh, Anna Sankari, Erik P. Månsson, Stacey L. Sorensen, Mathieu Gisselbrecht

2019-10-22 Paper

DOI: 10.1039/C9CP04221K

こちらもおすすめ

化合物よくある質問

オステニ二甲磺酸塩に適用される法規ガイドラインは何ですか?

オステニ二甲磺酸塩は、GHS分類に基づき corrosive 物質として分類されます。REACH規則では、該当物質の登録が要求される可能性があります。また、FD...

2070014-82-1N-(2-{[2-(Dimethylam...
化合物よくある質問

環丁基肼盐酸盐は安全ですか?

環丁基肼盐酸盐は毒性があり、吸入や皮膚接触は有害です。使用時の安全対策として、密閉システムを使用し、適切な排気設備を備えた場所で作業することが推奨されます。

1156980-49-2Cyclobutylhydrazine ...
化合物よくある質問

N-(4-パリドン基ソニルフェニル)硫代イソシアネートを取り扱う際の実験室安全事項は何ですか?

N-(4-パリドン基ソニルフェニル)硫代イソシアネートは高毒性で、皮膚や吸入による毒性があります。取り扱う際は防毒マスク、保護用手袋、保護眼鏡などのPPEを着用...

7356-55-01-[(4-Isothiocyanato...
化合物よくある質問

5-ヒドロキシ-1,3-ジヒドロ-2H-インドン-2-酮の物理化学的性質は何ですか?

CAS番号3416-18-0の5-ヒドロキシ-1,3-ジヒドロ-2H-インドン-2-酮は、結晶性の白色粉末です。分子量は228.25であり、 aqueous m...

3416-18-05-Hydroxy-1,3-dihydr...
化合物よくある質問

O-苄基-D-丝氨醇はどのように合成されますか?

O-苄基-D-丝氨醇は、D-アミノ酸とベンゼン環の経由で合成されます。触媒としてジメチルアミノピリジンが使用され、選択性は高いです。一般的な収率は約90%です。

58577-88-1(s)-2-Amino-3-benzyl...
化合物よくある質問

ナトリウム3-ヒドロキシbutano酸とは何ですか?

ナトリウム3-ヒドロキシbutano酸は、CAS番号13613-65-5で登録されている化合物です。この化合物は、(3R)-3-ヒドロキシbutano酸とナトリ...

13613-65-5sodium;(3R)-3-hydrox...
化合物よくある質問

1-(二苯甲基)-4-甲基ベンゼンの物理化学的性質は何ですか?

CAS番号603-37-2の1-(二苯甲基)-4-甲基ベンゼンは、結晶性の固体で、分子量は244.28であり、水中的には微溶です。この化合物は有機反応において中...

603-37-21-(Diphenylmethyl)-4...
化合物よくある質問

ネアミン塩酸塩の物理化学的性質は何ですか?

ネアミン塩酸塩の分子量は321.19であり、結晶性の白色粉末です。この化合物は水に溶けやすく、pHが低くなると不溶性になります。反応活性は高く、水溶液中の酸化還...

15446-43-2NEAMINE HYDROCHLORID...
化合物よくある質問

偶氮二甲酰二哌啶の主な用途は何ですか?

偶氮二甲酰二哌啶は、医薬品、染料、高 Então 剤、触媒、溶媒、量論試薬など、様々な分野で使用されています。特に、高 Enough 反応において、グリコール酸...

10465-81-3(E)-1,2-Diazenediylb...
化合物よくある質問

LF3はどのように保存すればよいですか?

LF3は直射日光を避けて暗所で、温度は常温以下の環境で保存し、密栓容器に入れて保管してください。

664969-54-44-[(2E)-3-Phenyl-2-p...

掲載誌

Polymer Chemistry

Polymer Chemistry
CiteScore: 8.6
自己引用率: 7.3%
年間論文数: 457

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.

おすすめサプライヤー

免責事項
このページに表示される学術雑誌情報は、参考および研究目的のみを目的としています。当社は雑誌出版社とは提携しておらず、投稿の取り扱いも行っておりません。出版に関するお問い合わせは、各雑誌出版社に直接ご連絡ください。
表示されている情報に誤りがある場合は、support@chemtradehub.com までご連絡ください。迅速に確認し、対応いたします。