Silica/polymer microspheres and hollow polymer microspheres as scaffolds for nitric oxide release in PBS buffer and bovine serum
文献情報
Tuanwei Liu, Dongwei Zhang, Xinlin Yang, Chenxi Li
This work reports the design, preparation and characterization of functional polymer microspheres as a reservoir for nitric oxide (NO)-release. Silica/polymer core–shell microspheres and the corresponding hollow functional polymer microspheres with secondary amino groups were converted to N-diazeniumdiolate as scaffolds for nitrogen oxide (NO) release. The silica/polymer core–shell microspheres were prepared by a multi-step procedure, which involves the synthesis of functional 2-(ethyl(boc)amino)ethyl methacrylate (bocAmEMA) monomers with boc-protected secondary amine sites, distillation precipitation polymerization of ethyleneglycol dimethacrylate and boc-protected co-monomers with the presence of 3-(methacryloxy)propyltrimethoxysilane (MPS)-modified silica nanoparticles as seeds, de-protection of the amino sites, and subsequent reaction between the secondary amino and NO under high pressure (5.0 atm) in the presence of sodium methoxide. The corresponding hollow polymer microspheres were prepared via the selective removal of the silica core from the silica/polymer core–shell microspheres with a hydrofluoride (HF) aqueous solution and the subsequent conversion to N-diazeniumdiolate NO donors via exposure to a high pressure of NO (5.0 atm) under basic conditions. The hollow microspheres with secondary amino groups exhibited a high storage capacity for NO (up to 5.5 μmol NO/mg), greatly increasing that of NO from the corresponding silica/polymer core–shell donors (3.6 μmol NO/mg). Both the silica/polymer and hollow polymer scaffolds are shown to release NO for extended periods of time with an ‘apparent’ t1/2 value of 35 min (silica/polymer scaffolds; PBS buffer), 10 min (hollow polymer scaffolds; PBS buffer), 19 min (hollow polymer scaffolds; bovine serum), and release durations of 24 h via the proton initiated diazeniumdiolate decomposition to give off NO spontaneously under physiological conditions.
おすすめジャーナル
関連文献
Mass partitioning effects in diffusion transport
Miljan Milosevic, Suhong Wu, Elvin Blanco, Mauro Ferrari, Arturas Ziemys
DOI: 10.1039/C5CP02720A
Controlling side reactions and self-discharge in high-voltage spinel cathodes: the critical role of surface crystallographic facets
Saravanan Kuppan, Hugues Duncan, Guoying Chen
DOI: 10.1039/C5CP04899K
Waveguide-coupled directional Raman radiation for surface analysis
Chen Chen, Jin-Yang Li, Li Wang, Dan-Feng Lu, Zhi-Mei Qi
DOI: 10.1039/C4CP05092D
Magneto-electronic properties of multilayer graphenes
Chiun-Yan Lin, Jhao-Ying Wu, Yih-Jon Ou, Yu-Huang Chiu, Ming-Fa Lin
DOI: 10.1039/C5CP05013H
Different behaviour of molecules in dark SERS state on colloidal Ag nanoparticles estimated by truncated power law analysis of blinking SERS
Daichi Araki, Tamitake Itoh, Yukihiro Ozaki
DOI: 10.1039/C4CP05070C
Low temperature pollutant trapping and dissociation over two-dimensional tin
Lauren Takahashi, Keisuke Takahashi
DOI: 10.1039/C5CP03382A
Six-fold-symmetry internal rotation in toluenes: the low barrier challenge of 2,6- and 3,5-difluorotoluene
K. P. Rajappan Nair, Michaela K. Jahn, Alberto Lesarri, Vadim V. Ilyushin, Jens-Uwe Grabow
DOI: 10.1039/C5CP03751D
Ab initio GGA+U study of oxygen evolution and oxygen reduction electrocatalysis on the (001) surfaces of lanthanum transition metal perovskites LaBO3 (B = Cr, Mn, Fe, Co and Ni)
Yueh-Lin Lee, Milind J. Gadre, Dane Morgan
DOI: 10.1039/C5CP02834E
こちらもおすすめ
4'-ブロモビフェニル-3-メトークシーディ.ActionBarはどのように保存すればよいですか?
4'-ブロモビフェニル-3-メトークシーディ.ActionBarは、冷暗所で、直射日光を避け、密栓の容器に保存し、遠隔場所に保管してください。温度は常温(0〜2...
2-異丙基フェニルヒドラジン塩酸塩とは何ですか?
2-異丙基フェニルヒドラジン塩酸塩は、CAS番号58928-82-8を有する化合物で、構造式はC11H14N2HClです。これは塩基性化合物であり、水に溶けやす...
5-(4-クロロフェニル)-4H-1,2,4-三氮唑-3-アミンを取り扱う際の実験室安全事項は何ですか?
5-(4-クロロフェニル)-4H-1,2,4-三氮唑-3-アミンは取り扱いに注意が必要です。PPEとして防塵マスク、ゴーグル、手袋を使用し、ドラフトチャンバーを...
去甲基雷贝拉唑硫醚はどのように合成されますか?
去甲基雷贝拉唑硫醚は、ベンジミダゾール硫化物と3-メチル-4-ピリジノールの反応によって合成されます。具体的には、2-チオキシドベンジミダゾールと3-メチル-4...
2-ブロモ-5-フロロ-N-(2-フェノールメチル)ベンゼンウレアは安全ですか?
2-ブロモ-5-フロロ-N-(2-フェノールメチル)ベンゼンウレアは、毒性や刺激性の実験データに基づき、適切な取扱いと防護措置を講じることで安全に使用できます。...
対甲苯磺酸酯-四聚乙二醇-四氢吡喃醚の物理化学的性質は何ですか?
対甲苯磺酸酯-四聚乙二醇-四氢吡喃醚のCAS番号は86259-89-4です。この化合物は無色の液体で、分子量は約724.8です。高濃度では溶血性が報告されており...
2-(3-(二氟甲基)-4-氟苯基)-4,4,5,5-四甲基-1,3,2-二噁硼戊環はどのように保存すればよいですか?
2-(3-(二氟甲基)-4-氟苯基)-4,4,5,5-四甲基-1,3,2-二噁硼戊環は、室温で暗い場所に保管し、直射日光から遠ざけ、容器は密閉状態で保存してくだ...
6-アミノ-5-クロロ-2-シクロプロピルピリミジンカルボン酸の代替品はありますか?
この化合物の代替品には、ピロリミジン酸やその類似物、またピロリミジンカルボン酸の他の異性体があります。これらの代替品は、特定の化学反応や目的に応じて選択すること...
5-クロロベンゾ[1,3]二オキセイン-4-アミンに適用される法規ガイドラインは何ですか?
5-クロロベンゾ[1,3]二オキセイン-4-アミンはCAS番号379228-45-2に該当します。この化合物はGHS分類でH314(接触により急性毒性がある)と...
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.













![N-[2,6-Di(9-anthryl)-4-oxido-8,9,10,11,12,13,14,15-octahydrodinaphtho[2,1-d:1',2'-f][1,3,2]dioxaphosphepin-4-yl]-1,1,1-trifluoromethanesulfonamide structure N-[2,6-Di(9-anthryl)-4-oxido-8,9,10,11,12,13,14,15-octahydrodinaphtho[2,1-d:1',2'-f][1,3,2]dioxaphosphepin-4-yl]-1,1,1-trifluoromethanesulfonamide structure](https://static.chemtradehub.com/structs/122/1227374-64-2-cdb5.webp)
