Kinetics of the (salen)Cr(iii)- and (salen)Co(iii)-catalyzed copolymerization of epoxides with CO2, and of the accompanying degradation reactions
文献情報
D. J. Darensbourg, A. D. Yeung
The (salen)Cr(III)- and (salen)Co(III)-catalyzed copolymerization reactions between a variety of epoxides with CO2 were studied by computational methods, and these findings were compared with experimental observations. The displacement of a polymeric carbonate by an epoxide, followed by epoxide ring-opening, was found to be the overall rate determining step (ΔG‡ = 22–27 kcal mol−1), whereas carboxylation of the metal-bound alkoxide is fast (ΔG‡ = 6–8 kcal mol−1). Chromium(III)-catalyzed systems have higher free energy barriers than cobalt(III) systems, consistent with the fact that (salen)Cr(III)-catalyzed polymerization reactions have to be performed at higher temperatures; such differences are attributed to enthalpy. The metal-bound polymer carbonate and alkoxide backbiting reactions generally have higher barriers than when unbound, due to the terminal oxygen atoms’ reduced nucleophilicity. Homopolymerization of epoxides to give polyether defects is negligible in both chromium- and cobalt-catalyzed systems. This is due to carboxylation (metal-bound or metal-free) being competitive, and because displacement of a polymeric alkoxide from the metal center by an epoxide is strongly endergonic.
おすすめジャーナル
関連文献
A double cubane structure in organoplatinum(iv) chemistry
Muhieddine S. Safa, Michael C. Jennings, Richard J. Puddephatt
DOI: 10.1039/B822683K
Large-pore monodispersed mesoporous silica spheres: synthesis and application in HPLC
Yingyu Li, Sanyan Cheng, Peichun Dai, Yanxiong Ke
DOI: 10.1039/B818553K
Real-time determination of chloride anion concentration in aqueous-DMSO using a pyrrole-strapped calixpyrrole anion receptor‡
Dae-Wi Yoon, Dustin E. Gross, Vincent M. Lynch, Chang-Hee Lee, Philip C. Bennett, Jonathan L. Sessler
DOI: 10.1039/B818077F
Order–disorder and displacive components in the ferroelectric–paraelectric phase transition of potassium titanyl phosphate KTiOPO4
Masatomo Yashima, Takafumi Komatsu
DOI: 10.1039/B817280C
A tris(alkyl)yttrium compound containing six β-agostic Si–H interactions
KaKing Yan, Andrew V. Pawlikowski, Chris Ebert, Aaron D. Sadow
DOI: 10.1039/B818630H
Heteropolyacid-assisted fabrication of carbon nanostructures under ambient conditions
Enbo Wang
DOI: 10.1039/B812573B
3-Mercaptopropionic acid-mediated synthesis of peptide and protein thioesters
Jaskiranjit Kang, Jonathan P. Richardson, Derek Macmillan
DOI: 10.1039/B815888F
こちらもおすすめ
オステニ二甲磺酸塩に適用される法規ガイドラインは何ですか?
オステニ二甲磺酸塩は、GHS分類に基づき corrosive 物質として分類されます。REACH規則では、該当物質の登録が要求される可能性があります。また、FD...
環丁基肼盐酸盐は安全ですか?
環丁基肼盐酸盐は毒性があり、吸入や皮膚接触は有害です。使用時の安全対策として、密閉システムを使用し、適切な排気設備を備えた場所で作業することが推奨されます。
N-(4-パリドン基ソニルフェニル)硫代イソシアネートを取り扱う際の実験室安全事項は何ですか?
N-(4-パリドン基ソニルフェニル)硫代イソシアネートは高毒性で、皮膚や吸入による毒性があります。取り扱う際は防毒マスク、保護用手袋、保護眼鏡などのPPEを着用...
5-ヒドロキシ-1,3-ジヒドロ-2H-インドン-2-酮の物理化学的性質は何ですか?
CAS番号3416-18-0の5-ヒドロキシ-1,3-ジヒドロ-2H-インドン-2-酮は、結晶性の白色粉末です。分子量は228.25であり、 aqueous m...
O-苄基-D-丝氨醇はどのように合成されますか?
O-苄基-D-丝氨醇は、D-アミノ酸とベンゼン環の経由で合成されます。触媒としてジメチルアミノピリジンが使用され、選択性は高いです。一般的な収率は約90%です。
ナトリウム3-ヒドロキシbutano酸とは何ですか?
ナトリウム3-ヒドロキシbutano酸は、CAS番号13613-65-5で登録されている化合物です。この化合物は、(3R)-3-ヒドロキシbutano酸とナトリ...
1-(二苯甲基)-4-甲基ベンゼンの物理化学的性質は何ですか?
CAS番号603-37-2の1-(二苯甲基)-4-甲基ベンゼンは、結晶性の固体で、分子量は244.28であり、水中的には微溶です。この化合物は有機反応において中...
ネアミン塩酸塩の物理化学的性質は何ですか?
ネアミン塩酸塩の分子量は321.19であり、結晶性の白色粉末です。この化合物は水に溶けやすく、pHが低くなると不溶性になります。反応活性は高く、水溶液中の酸化還...
偶氮二甲酰二哌啶の主な用途は何ですか?
偶氮二甲酰二哌啶は、医薬品、染料、高 Então 剤、触媒、溶媒、量論試薬など、様々な分野で使用されています。特に、高 Enough 反応において、グリコール酸...
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.












![5-Chloropyrrolo[2,1-f][1,2,4]triazin-4(3H)-one structure 5-Chloropyrrolo[2,1-f][1,2,4]triazin-4(3H)-one structure](https://static.chemtradehub.com/structs/888/888720-60-3-4f7c.webp)

