Co-delivery of 5-fluorocytosine and cytosine deaminase into glioma cells mediated by an intracellular environment-responsive nanovesicle
文献情報
Yuanyuan Yuan, Shudong Lin, Du Cheng, Xiaoying Wang, Qing Jiang, Xintao Shuai
The diblock copolymer (PEI-PAsp(DIP/MEA)) of branched polyethyleneimine (PEI) and biodegradable poly(2-diisopropylamino/2-mercaptoethylamine) ethyl aspartate (PAsp(DIP/MEA)) was synthesized and assembled into nanovesicles for the co-delivery of cytosine deaminase (CD) gene and 5-fluorocytosine (pCMVCD/5-FC) into glioma cells. The nanovesicle comprises a hydrophilic outerlayer of branched PEI for pCMVCD complexation, a hydrophilic inner cavity for prodrug 5-FC loading, and a pH-sensitive membrane crosslinked by disulfide to prevent drug leakage into the bloodstream-simulating environment with neutral pH and without reducing agent. Yet, once the PPDM (PEI-PAsp(DIP/MEA)) nanovesicle was internalized into cancer cells and entrapped inside lysosomes featuring a low pH (∼5) and enriched reducing agent (∼10 mM GSH), it dissociated as a result of tertiary amine protonation and disulfide bond breakage to release the loaded drug. The in vitro release studies showed that less than 10% of 5-FC was released from the nanovesicle in 24 h at pH 7.4, whereas about 98% of 5-FC was released in the presence of 10 mM GSH at pH 5.0. The prodrug 5-FC was converted into its toxic active metabolite 5-fluorouracil (5-FU) by cytosine deaminase inside C6 glioma cells, owing to the effective CD gene transfection and expression. As a result, the 5-FC/pCMVCD-loaded nanovesicle induced effective apoptosis and generated a significant cytotoxic effect in the cancer cells. Our results indicated that this multifunctional nanovesicle is a promising carrier for the co-delivery of gene and drug or prodrug in cancer therapy.
おすすめジャーナル

Drug Discovery Today

Chemistry Education Research and Practice

Russian Chemical Bulletin

Organic Process Research & Development

Russian Journal of Applied Chemistry

Chemical Communications

Journal of Saudi Chemical Society

Journal of Peptide Science

Current Opinion in Solid State & Materials Science

Saudi Pharmaceutical Journal
関連文献
Differential effects of MoO3 and MoO2 sacrificial layers on the J–V performance of Cu2ZnSn(S,Se)4 solar cells
Jinhui Zhang, Chuanhe Ma, Haixuan Gao, Jinchun Jiang, Hailong Wang
DOI: 10.1039/D3SE01409F
Twist angle and electric gating controllable electronic structure of the two-dimensional stacked BP homo-structure
Linwei Yao, Jiangni Yun, Peng Kang, Hongyuan Zhao, Siyu Zhang, Liru Zeng, Zhisong Bi, Junfeng Yan, Wu Zhao, Zhiyong Zhang
DOI: 10.1039/D3CP03591C
Silicon nanocrystal hybrid photocatalysts as models to understand solar fuels producing assemblies
Simran S. Saund, Abha Dabak-Wakankar, Melissa K. Gish
DOI: 10.1039/D3SE01512B
Constructing low-cost and high-strength ultra-low-density proppants based on the modification of activated carbon framework with in situ hydrolyzed silane
Zhen Zeng, Shiqiang Wang, Ermei Liu, Wei Qin, Yang Zhou, Zhenyong Li, Yu Song, Min Xu, Fuli Bian, Xianyan Ren
DOI: 10.1039/D3SE01311A
Research on structural strengthening technology for regenerative denitration catalysts
Dongliang Ji, Dongxue Jiang, Yang Li, Huan Zhang, Haiyun Zhou, Zhaoqin Huang, Jianzhong Zhu
DOI: 10.1039/D3CP04214F
Group 13 five- and six-membered rings with rare 2π aromaticity
Yutong Huo, Xiaojiao Gu, Xinde Li, Peng Jin
DOI: 10.1039/D3CP04159J
Honeycomb-like hollow carbon loaded with ruthenium nanoparticles as high-performance HER electrocatalysts
Peng-Cheng Ji, Yang Teng, Hong-Cheng Li, Ming-Yun Guan, Hai-Lang Jia
DOI: 10.1039/D3SE01343J
Electrochemical CO2 conversion technologies: state-of-the-art and future perspectives
Remko J. Detz, Claire J. Ferchaud, Arie J. Kalkman, Jasmin Kemper, Carlos Sánchez-Martínez, Marija Saric, Manoj V. Shinde
DOI: 10.1039/D3SE00775H
Effects of pore structures on a phenolic resin-derived self-supported electrode for highly efficient electroreduction of CO2 to syngas
Haowen Chen, Junwei Zhang, Kang Wang, Xitao Wang
DOI: 10.1039/D3SE01574B
こちらもおすすめ
1-{3-[5-(エチルカルボンイル)-2,4-ジメチル-1H-ピロロール-3-基]プロパニル}ピペリジン-4-カルボン酸について、適用される法規ガイドラインは何ですか?
この化合物はCAS番号1142209-81-1であり、GHS分類では corrosive (腐食性物質) と classified (分類物質) として指定され...
2,2-二氟-1,3-ベンゾジオキサン-5-カルボキシlic酸とは何ですか?
2,2-二氟-1,3-ベンゾジオキサン-5-カルボキシlic酸は、CAS番号656-46-2の化合物で、化学式はC8H4F2O4です。この化合物は白色の結晶性粉...
8-氯-4-色原酮の代替品はありますか?
8-氯-4-色原酮(CAS番号: 49701-11-3)の代替品には、他の色原酮類似物や、構造が似ている化合物があります。例えば、8-メチル-4-色原酮や、他の...
エチル6,6-ジメチル-4,5,6,7-テトラヒドロ-1H-インドアゼー-3-カルボキシレートとは何ですか?
エチル6,6-ジメチル-4,5,6,7-テトラヒドロ-1H-インドアゼー-3-カルボキシレートは、CAS番号1233243-56-5を有する化合物です。これは有...
4-叔丁基-6-氯-嘧啶に適用される法規ガイドラインは何ですか?
4-叔丁基-6-氯-嘧啶はCAS番号3435-24-3で、GHS分類では毒性物質とみなし、GHSの危険性分類が適用されます。REACH規則では登録が必要で、Eu...
維库溴铵杂质Bはどのように合成されますか?
維库溴铵杂质Bは、アンドロステンデンから始まり、一連の合成反応、包括的な選択性と高い収率で合成されます。具体的には、ブロミド化、酸化、ジマーゼ反応、アミド化など...
2-(4-氟苄基)-吡咯烷の物理化学的性質は何ですか?
CAS番号350017-04-8の2-(4-氟苄基)-吡咯烷は、結晶性の白色粉末です。分子量は199.17 g/molで、水に溶けにくいです。化学反応では比較的...
3-喹啉甲醛(2-チロール-8-エチル)は安全ですか?
3-喹啉甲醛(2-チロール-8-エチル)は一定の毒性を持つため、取扱には注意が必要です。使用する際は適切な防護具を着用し、密閉容器で保管・搬送し、直接的な接触を...
エチル3-(ヒドロキシメチル)-1H-ピロール-2-カルボキシレートはどのように保存すればよいですか?
エチル3-(ヒドロキシメチル)-1H-ピロール-2-カルボキシレートは、室温(25℃)以下で保存し、直射日光を避け、乾燥した環境で保管することが推奨されます。ま...
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.




![Bis[(1,2,3,4,5-eta)-1-(diphenylphosphino)cyclopentadienyl]iron structure Bis[(1,2,3,4,5-eta)-1-(diphenylphosphino)cyclopentadienyl]iron structure](https://static.chemtradehub.com/structs/121/12150-46-8-ecd2.webp)