Coverage dependent adsorption and co-adsorption of CO and H2 on the CdI2-antitype metallic Mo2C(001) surface‡
文献情報
Tao Wang, Jianguo Wang, Matthias Beller
The adsorption and co-adsorption of CO and H2 at different coverage on the CdI2-antitype metallic Mo2C(001) surface termination have been systematically computed at the level of periodic density functional theory. Only molecular CO adsorption is possible and the monolayer coverage (1 ML) can have 16CO adsorbed at the top sites. Dissociative H2 adsorption is favored thermodynamically and the monolayer coverage (1 ML) can have 16H adsorbed at the hollow sites. Since CO has much stronger adsorption energy than H2, pre-adsorption of CO is possible. CO pre-adsorption strongly affects atomic hydrogen co-adsorption at a high CO/H2 ratio, while hardly affects that at a low CO/H2 ratio. Under ultra-high vacuum conditions (200 K, 10−12 atm and CO/H2 = 1/1), the most stable adsorbed surface state has CO/H2 = 15/1. Comparison among the metallic terminations of the CdI2-antitype Mo2C(001), eclipsed Mo2C(001) and orthorhombic Mo2C(100) surfaces shows their different CO and hydrogen adsorption as well as activation properties, which reveals that the CdI2-antitype Mo2C(001) surface is least active. These differences come from their surface bonding properties; the CdI2-antitype Mo2C(001) surface is saturated and less metallic, while the eclipsed Mo2C(001) and orthorhombic Mo2C(100) surfaces are unsaturated and more metallic.
おすすめジャーナル
関連文献
Joint experimental and theoretical study of the poly(styryl sodium) and poly(α-methylstyryl sodium) polymerization/depolymerization
DOI: 10.1039/B105389M
Hydrogen effects in hexane reactions over Al2O3 supported Pt, Ir and Pt–Ir catalysts
DOI: 10.1039/A902976A
Laser spectroscopy of YBr: rotational analysis of the C1Σ–X1Σ system
J. W-H. Leung, Jinghua Dai, Xianghuai Wang, A. S-C. Cheung
DOI: 10.1039/B105895A
Fast dimerisation of the triparaquat radical dication
M. Vuckovic, S. V. Mentus, E. Janata, B. H. Milosavljevic
DOI: 10.1039/B103926C
FTIR study of the photo-induced reaction of NO + CO on Rh/TiO2
DOI: 10.1039/B103627K
Ab initio and kinetic calculations for the reactions of H with SiH(4−n)Fn (n = 1–3)
Qingzhu Zhang, Shaokun Wang, Chunsheng Wang, Yueshu Gu
DOI: 10.1039/B104107J
こちらもおすすめ
S-(甲硅烷基丙基)異硫酰氯を取り扱う際の実験室安全事項は何ですか?
取り扱う際にはPPE(防護具)が必要です。特に手袋と面マスクは必須です。ドラフトチャンバーを使用して漏洩処理を行い、温度は常温、湿度は乾燥状態、容器はガラス容器...
8-硝基-咪唑并[1,2-a]吡啶とは何ですか?
8-硝基-咪唑并[1,2-a]吡啶は、CAS番号52310-46-0の化合物で、8-位に硝基を有する咪唑並みの结构をもつ吡啶の化合物です。この化合物は、酸化還元...
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品はありますか?
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品には、類似構造を持つ化合物や機能性に等しい代替試薬があります。例えば、4-クロロ-5-メトキシピリジン-2-甲...
全氟-1,2-二甲基環己烷を含む廃棄物はどのように処理すべきですか?
全氟-1,2-二甲基環己烷(CAS番号:306-98-9)の廃棄物は、特別な処理が必要です。まず、廃棄物を密閉容器に収集し、適切な防漏容器に保管します。次に、専...
3-(溴甲基)苯乙酸の主な用途は何ですか?
3-(溴甲基)苯乙酸は主に研究用化学薬品として利用され、有機合成や医薬品の開発に用いられます。また、特定の化合物の合成中間体としても使用されることがあります。
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンはどのように保存すればよいですか?
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンは冷暗所で密栓の容器に保存し、直射日光を避けて保管することをお勧めします。温度は常温とし、湿気を...
1-(2-溴-6-甲氧基苯基)乙酮を取り扱う際の実験室安全事項は何ですか?
実験室では、1-(2- Bromo-6-methoxyphenyl)ethanoneを取り扱う際には、ゴーグルや面具、手袋などのPPEを使用することが推奨されま...
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは安全ですか?
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは一般に安全ですが、取扱いには注意が必要です...
4-溴萘-1-甲酸の代替品はありますか?
4-溴萘-1-甲酸は比較的稀な化合物ですが、類似物としては、4-クロロ-1-ナフホリック酸やその他のブロモ置換ナフホリック酸が挙げられます。ただし、これらの代替...
ε-白藜芦醇脱氢二聚体の代替品はありますか?
ε-白藜芦醇脱氢二聚体の代替品としては、ε-白藜芦醇、ポリフェノール類、フラボノイド類が挙げられます。これらは類似の化学構造と生物学的活性を持っています。ただし...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














