Electrochemical in battery polymerization of poly(alkylenedioxythiophene) over lithium iron phosphate for high-performance cathodes
文献情報
Daniel Cíntora-Juárez, Carlos Pérez-Vicente, Shahzada Ahmad, José Luis Tirado
A molecular wiring concept was induced in LiFePO4 cathodes by in battery polymerization methods. This was performed by the addition of alkylthiophene monomers over the LiFePO4-based cathode during the first charging step in lithium test cells. The driving force for the in battery polymerization of the monomers was supplied by the oxidizing current and by the physical contact of monomers with delithiated Li1−xFePO4 formed during the charging of the battery. The resulting molecularly engineered cathodes give higher initial capacity, superior rate capability and improved cyclability compared to the pristine LiFePO4 compound. Further to observe changes in the oxidation state of iron, Mössbauer spectroscopy was employed and the results were correlated with those of impedance spectroscopy, which reveal a significant increase in conductivity during charging. The presented methods provide simple yet effective routes for manufacturing efficient cathode materials at room temperature, without the need of additional oxidizing compounds to carry out the polymerization process and to rival high temperature based carbon coatings.
おすすめジャーナル
関連文献
An integrated, peptide-based approach to site-specific protein immobilization for detection of biomolecular interactions
Dennis W. P. M. Löwik, Wilbert C. Boelens, Jan C. M. van Hest, Ger J. M. Pruijn
DOI: 10.1039/C6AN00154H
The efficiencies of resonant and nonresonant multiphoton ionization in the femtosecond region
Hiroaki Kouno
DOI: 10.1039/C6AN00577B
iHEART: a miniaturized near-infrared in-line gas sensor using heart-shaped substrate-integrated hollow waveguides
Rafael L. Ribessi, Thiago de A. Neves, Jarbas J. R. Rohwedder, Celio Pasquini, Ivo M. Raimundo, Jr., Andreas Wilk, Vjekoslav Kokoric, Boris Mizaikoff
DOI: 10.1039/C6AN01027J
Changes in the volume phase transition temperature of hydrogels for detection of the DNA hybridization process
Klaudia Kaniewska, Agata Kowalczyk, Marcin Karbarz, Anna M. Nowicka
DOI: 10.1039/C6AN00523C
Multiplexed cancer biomarker detection using chip-integrated silicon photonic sensor arrays
Adam L. Washburn, Winnie W. Shia, Kimberly A. Lenkeit, So-Hyun Lee, Ryan C. Bailey
DOI: 10.1039/C6AN01076H
A tunable Au core–Ag shell nanoparticle tip for tip-enhanced spectroscopy
Woong Kim, Nara Kim, Eunbyoul Lee, Duckhoe Kim, Zee Hwan Kim, Joon Won Park
DOI: 10.1039/C6AN00035E
Biomolecular environment, quantification, and intracellular interaction of multifunctional magnetic SERS nanoprobes
Tina Büchner, Daniela Drescher, Heike Traub, Peter Guttmann, Stephan Werner, Norbert Jakubowski, Gerd Schneider, Janina Kneipp
DOI: 10.1039/C6AN00890A
こちらもおすすめ
2-氟-4-イオドベンzo酸エチルエステルを取り扱う際の実験室安全事項は何ですか?
2-氟-4-イオドベンzo酸エチルエステルは有機溶媒を用いた反応であり、ドラフトチャンバーでの操作が必要です。漏洩時にはSDS参照の安全措置を講じ、PPE(防護...
血根碱の主な用途は何ですか?
血根碱は主に医薬分野で利用され、抗炎症や抗がん剤としての潜在的な効果が研究されています。また、化学研究や薬物開発において、新しい薬剤設計の参考となる化合物として...
Methyl 3-methoxythiophene-2-carboxylateの主な用途は何ですか?
Methyl 3-メトキシスチフェン-2-カルボン酸メチルエステルは、薬品合成、染料製造、以及合成中間体としての用途が広がっています。
丹磺酰-L-亮氨酸はどのように保存すればよいですか?
丹磺酰-L-亮氨酸は乾燥した場所で、直射日光から保護し、低温(室温以下)で保存してください。密閉容器に入れて保管することをおすすめします。
5-(苄氧基)ピラミジン-4-アミンの代替品はありますか?
5-(苄氧基)ピラミジン-4-アミンの代替品として、6-メトキシピラミジンや5-フェニルピラミジンなどが挙げられます。これらの化合物は、5-(苄氧基)ピラミジン...
8-ヒドロキシノルデコペントアセートの物理化学的性質は何ですか?
8-ヒドロキシノルデコペントアセートはCAS番号84807-87-4の化合物で、分子量は750.02 uです。これは油溶性で、水に溶けにくい特徴があります。反応...
tert-ブチル(エス)-1-ヒドロキシペンタ-4-エン-2-イルカルバamateの主な用途は何ですか?
tert-ブチル(エス)-1-ヒドロキシペンタ-4-エン-2-イルカルバamateは主に医薬品の合成材料や分析化学の試薬として使用されます。
ブコール-L-2-フローヨルブリンについて適切な法規ガイドラインは何ですか?
ブコール-L-2-フローヨルブリン(CAS番号: 1196107-73-9)は、GHS(グローバルハザードアサessmentシステム)に基づく危害分類と表示が求...
6-ブロモ-N-環丙基-2-ピリジニニメタンの市場動向や研究トレンドはどうですか
6-ブロモ-N-環丙基-2-ピリジニニメタンは、薬理学研究や合成化学に使用される化合物であり、特に抗ウイルス薬や抗がん薬の開発に注目されています。市場では、薬物...
RS-AMPÀはどのように保存すればよいですか?
RS-AMPÀは、遮光容器に保存し、室温(15〜25℃)で保管することが推奨されます。高湿や熱は物質を劣化させるため、湿度は50%以下に保つことが重要です。また...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.












![4-[(2-Oxo-1,2,3,4-tetrahydroquinolin-7-yl)oxy]butanoic acid structure 4-[(2-Oxo-1,2,3,4-tetrahydroquinolin-7-yl)oxy]butanoic acid structure](https://static.chemtradehub.com/structs/588/58899-27-7-1f86.webp)

