Synthesis and optical properties of new fluorinated second-order nonlinear optical copolymers: an attempt toward the balance between solubility and long-term alignment stability
文献情報
Jialei Liu, Ling Qiu, Xinhou Liu, Shuhui Bo, Zhen Zhen
A new fluorinated co-polyarylate (P) was synthesized by interfacial polymerization of 1,1-bis(4-hydroxyphenyl)-1-phenyl-2,2,2-trifluoroethane (BPAPF) and diphenolic acid (DPA) with isophthaloyl chloride (IPC). P1–P3, containing different concentrations of tricyanofuran (TCF) accepter chromophores, were obtained by the esterification reaction between P and chromophore 1 catalyst by DCC and DPTS. The obtained co-polyarylates were characterized and evaluated by UV-Vis, 1H NMR, FT-IR, GPC, DSC and TGA. All the co-polyarylates P1–P3 exhibited excellent thermal stability, film forming ability and good electro-optic (EO) activity. The largest r33 value of the copolymers is 52 pm V−1 at the wavelength of 1310 nm, when the concentration of chromophore 1 is 18 wt%.
関連文献
N-Acetoxy-phthalimide (NAPI) as a new H-abstracting agent at high temperature: application to the melt functionalization of polyethylene
Denis Bélékian, Philippe Cassagnau, Jean-Jacques Flat, Sébastien Quinebeche, Laurent Autissier, Denis Bertin, Didier Siri, Didier Gigmes, Yohann Guillaneuf, Philippe Chaumont, Emmanuel Beyou
DOI: 10.1039/C3PY00246B
A novel polytriazole-based organogel formed by the effects of copper ions
Yujing Li, Liqiang Wan, Hao Zhou, Farong Huang, Lei Du
DOI: 10.1039/C3PY00227F
Functional oligo(vinyl acetate) bearing bipyridine moieties by RAFT polymerization and extraction of metal ions in supercritical carbon dioxide
Shoucun Zhang, Yali Luo, Hongwei Yang, Hai-Jian Yang, Bien Tan
DOI: 10.1039/C3PY00212H
Stainless steel surfaces with thiol-terminated hyperbranched polymers for functionalization viathiol-based chemistry
Wen Jing Yang, Koon-Gee Neoh, En-Tang Kang, Serena Lay-Ming Teo, Daniel Rittschof
DOI: 10.1039/C3PY00009E
Synthesis of 1,4-polybutadiene-g-poly(ethylene oxide) via the macromonomer approach by ROMP
Dao Le, Véronique Montembault, Sagrario Pascual, Floraine Collette, Valérie Héroguez, Laurent Fontaine
DOI: 10.1039/C3PY21103G
Well-defined graft copolymers of tert-butyldimethylsilyl methacrylate and poly(dimethylsiloxane) macromonomers synthesized by RAFT polymerization
Marlène Lejars, André Margaillan, Christine Bressy
DOI: 10.1039/C3PY00196B
Light induced molecular release from vesicles based on amphiphilic linear-dendritic block copolymers
Eva Blasco, Jesús del Barrio, Carlos Sánchez-Somolinos, Milagros Piñol, Luis Oriol
DOI: 10.1039/C2PY21025H
Evolution of flow-oriented design strategies in the continuous preparation of pharmaceuticals
Zsolt Fülöp, Péter Szemesi, Péter Bana, János Éles, István Greiner
DOI: 10.1039/D0RE00273A
Synthesis, assembly, and cross-linking of polymeramphiphilesin situ: polyurethane–polylactide core–shell particles
Kevin P. McNamee, Louis M. Pitet, Daniel M. Knauss
DOI: 10.1039/C3PY00030C
こちらもおすすめ
2,5-二羧基氟苯の市場動向や研究トレンドはどうですか?
2,5-二羧基氟苯の市場は、主に医薬品および農薬の研究開発において伸長しています。一方、環境への影響や安全性の懸念から、その使用は一定の制限が置かれています。今...
8-甲基-2-噻吩-2-基-喹啉-4-羧酸を含む廃棄物はどのように処理すべきですか?
8-甲基-2-噻吩-2-基-喹啉-4-羧酸を含む廃棄物は専門的な廃棄処理が必要です。具体的には、廃棄物は密閉の容器に収集し、適切な危険物対策を講じて専門業者に引...
2-(1,3-二氧杂烷-2-基)噻唑の物理化学的性質は何ですか?
CAS番号24295-04-3の2-(1,3-二氧杂烷-2-基)噻唑は、結晶形態により白色粉末を呈します。分子量は208.23 g/molであり、水に溶けにくい...
L-beta-高酪氨酸塩酸塩は安全ですか?
L-beta-高酪氨酸塩酸塩自体は毒性は低く、しかし使用する際は適切な個人保護具を使用し、誤飲や皮膚への接触を避けることが推奨されます。
睡茄灯笼草素Cはどのように合成されますか?
睡茄灯笼草素Cは、シクラメンケチャナfromaceaeから抽出する方法や、化学合成法で合成することができます。典型的な化学合成法では、3β,22-二オキシエクス...
4-(嘧啶-2-基)哌嗪-1-羧酸叔丁酯はどのように保存すればよいですか?
4-(嘧啶-2-基)哌嗪-1-羧酸叔丁酯は直射日光を避けて、室温で保存するのが良いです。湿度を避けて密閉容器に入れて保管し、未使用の状態で長期保存することができ...
NBI-74330の主な用途は何ですか?
NBI-74330は主に薬理学研究および医療用途に使用されています。その主な用途は抗がん作用を有するため、がん治療の研究に使用されています。
6-トリフルオロメチル-2-クロロピリジン-4-ボリリック酸はどのように合成されますか?
6-トリフルオロメチル-2-クロロピリジン-4-ボリリック酸は、6-トリフルオロメチル-2-クロロピリジンとボリルリチウムを触媒なしで反応させることで合成するこ...
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.














