A simple combination of higher-oxidation-state FeX3 and phosphine or amineligand for living radical polymerization of styrene, methacrylate, and acrylate
文献情報
Hiroshi Aoshima, Kotaro Satoh, Tomonari Umemura, Masami Kamigaito
Higher-oxidation-state iron halides [FeX3 (X = Cl, Br)] were employed in conjunction with a series of ligands, mainly monodentate phosphines and amines, to effect the living radical polymerization of various vinyl monomers such as styrene, methyl methacrylate (MMA), and methyl acrylate (MA). Almost all combinations examined could enable polymerizations in the absence of exogenous reducing agents. However, appropriate combinations of FeX3 and ligands gave rise to polymers in a living manner, with controlled molecular weights and narrow molecular weight distributions (Mw/Mn = 1.1–1.2). Ligand combinations included FeCl3 with PnBu3, PtBu3, or NnBu3 (for styrene); FeCl3 with PtBu3 or NnBu3 (for MMA); and FeBr3 with PPh3 (for MA). Model reactions and spectroscopic analysis suggest that FeCl3 most likely disproportionates into the Fe(III)Cl4− anion and Fe(III)Cl2+ cation in the presence of Lewis base ligands (PR3 and NR3). The latter cationic species, coordinated with the ligand [Fe(III)Cl2(PR3)+ or Fe(II)Cl2(PR3)˙+], acts as the active catalyst. Assistance from the electron-rich ligand allows the catalyst to induce metal-catalyzed living radical polymerization. The Fe(III)-based catalyst could also be easily and almost quantitatively removed from the polymer product simply by washing with aqueous acid to minimize the amount of iron contamination (<5 ppm).
関連文献
Autonomous folding in the membrane proximal HIV peptide gp41659–671: pH tuneability at micelle interfaces
Craig R. Gregor, Eleonora Cerasoli, Paul R. Tulip, Maxim G. Ryadnov, Glenn J. Martyna
DOI: 10.1039/C0CP01502D
Noble metal ionic sites for catalytichydrogen combustion: spectroscopic insights
Parag A. Deshpande, Giridhar Madras
DOI: 10.1039/C0CP01110J
Ionic liquid silver salt complexes for propene/propane separation
Friederike Agel, Fee Pitsch, Florian Felix Krull, Peter Schulz, Matthias Wessling, Thomas Melin, Peter Wasserscheid
DOI: 10.1039/C0CP01104E
Thermodynamics of liquids: standard molar entropies and heat capacities of common solvents from 2PT molecular dynamics
Shiang-Tai Lin
DOI: 10.1039/C0CP01549K
Synergistic effect of crystal and electronic structures on the visible-light-driven photocatalytic performances of Bi2O3 polymorphs
Hefeng Cheng, Baibiao Huang, Jibao Lu, Zeyan Wang, Bing Xu, Xiaoyan Qin, Xiaoyang Zhang, Ying Dai
DOI: 10.1039/C0CP01189D
Fast and ultrafast spectroscopic investigation of tetracycline derivatives in organic and aqueous media
Benedetta Carlotti, Domenico Fuoco, Fausto Elisei
DOI: 10.1039/C0CP00044B
こちらもおすすめ
「邻羟基阿托伐他汀内酯标准品」に適用される法規ガイドelinesは何ですか?
CAS番号163217-74-1の「邻羟基阿托伐他汀内酯标准品」は、GHS分類では危険物に分類されず、主にREACH規則とFDA/EPAの管理対象となります。R...
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩の主な用途は何ですか?
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩は、医薬品や合成化学の研究に広く用いられます。また、特定の薬物の前...
トランス-4-メチルピロリジン-3-オール塩酸塩はどのように合成されますか?
トランス-4-メチルピロリジン-3-オール塩酸塩は、4-メチルピロリジンの塩酸塩化によって合成されます。一般的な合成方法では、4-メチルピロリジンを塩酸に加えて...
硫雜環丁烷-1,1-二氧化物は安全ですか?
硫雜環丁烷-1,1-二氧化物は安全ではありません。毒性は報告されていませんが、高温下で分解し、可燃性があるため、高圧ガスは注意が必要です。密閉した容器で保管し、...
9-ヒドロキシエリプチシネ塩酸塩はどのように合成されますか?
9-ヒドロキシエリプチシネ塩酸塩は、エリプチシネから塩酸を添加することで合成されます。選択性は高いですが、収率は約70%です。
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮の物理化学的性質は何ですか?
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮のCAS番号は5621-86-3です。この化合物は白色の結晶性粉末で、分子量は415.03で...
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪はどのように保存すればよいですか?
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪は、直射日光を避けて暗所に、室温(15-25℃)で保管し、密閉容器に入れることで安定性を保つことができます。
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンの主な用途は何ですか?
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンは、医薬品の合成、有機合成化学、および新材料の研究で使用され...
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.














