Using reversibility of the dynamic covalent bond to create porosity in highly ordered polymer thin films under mild conditions and nano-pore functionalization in the gas phase
文献情報
Jingyi Rao, Anzar Khan
Phase-separating polystyrene (PS) and polyethylene glycol (PEG) polymers are connected through a hydrazone-based reversible covalent bond to afford a PS–CHN–PEG diblock copolymer. This novel dynamic covalent copolymer assembles into a nano-structured cylindrical morphology in thin films. Reversal of the hydrazone linkage and removal of PEG–hydrazide under mild conditions afford a nano-porous membrane featuring a chemically reactive functionality in the nano-pores. Availability of these reactive groups for further thin film functionalization is demonstrated by re-establishing the imine bond with a small molecule amine. This modification strategy does not require any coupling reagent, solvent, or high temperature. Therefore, a gas-phase technique is sufficient for film functionalization purposes.
関連文献
Atom transfer radical polymerization as a tool for making poly(N-acryloylglycinamide) with molar mass independent UCST-type transitions in water and electrolytes
Fangyao Liu, Jan Seuring, Seema Agarwal
DOI: 10.1039/C3PY00222E
SET-LRP of hydrophobic and hydrophilic acrylates in trifluoroethanol
Shampa R. Samanta, Martin E. Levere, Virgil Percec
DOI: 10.1039/C3PY00289F
A one component methodology for the fabrication of honeycomb films from biocompatible amphiphilic block copolymer hybrids: a linear–dendritic–linear twist
Marie V. Walter, Pontus Lundberg, Daniel Hult, Anders Hult, Michael Malkoch
DOI: 10.1039/C3PY00053B
Effects of “mature micelle” formation of Pluronic P123 on equilibrium between lactone and carboxylate forms of 10-hydrocamptothecin in water
Tianyuan Ci, Ting Li, Liang Chen, Guangtao Chang
DOI: 10.1039/C3PY00118K
Synthesis of high-molecular weight block copolymers of norbornene and propylene with methyl methacrylate initiated by a fluorenylamido titanium complex
Ryo Tanaka, Yuushou Nakayama, Takeshi Shiono
DOI: 10.1039/C3PY00400G
Multifunctional poly(amine-ester)-type hyperbranched polymers: lipase-catalyzed green synthesis, characterization, biocompatibility, drug loading and anticancer activity
Fangli Xu, Jiaren Zhong, Xueqi Qian, Yanyan Li, Xianfu Lin, Qi Wu
DOI: 10.1039/C3PY00156C
New insights into radical and cationic polymerizations upon visible light exposure: role of novel photoinitiator systems based on the pyrene chromophore
Mohamad-Ali Tehfe, Frédéric Dumur, Emmanuel Contal, Bernadette Graff, Fabrice Morlet-Savary, Didier Gigmes, Jean-Pierre Fouassier, Jacques Lalevée
DOI: 10.1039/C2PY20950K
Polymerization behaviors and polymer branching structures in ATRP of monovinyl and divinyl monomers
Hongjun Yang, Xiaoqiang Xue, Bibiao Jiang, Jianhai Chen, Yang Yang, Hongting Pu, Yun Liu, Dongliang Zhang, Lizhi Kong, Guangqun Zhai
DOI: 10.1039/C3PY00338H
こちらもおすすめ
2,5-二羧基氟苯の市場動向や研究トレンドはどうですか?
2,5-二羧基氟苯の市場は、主に医薬品および農薬の研究開発において伸長しています。一方、環境への影響や安全性の懸念から、その使用は一定の制限が置かれています。今...
8-甲基-2-噻吩-2-基-喹啉-4-羧酸を含む廃棄物はどのように処理すべきですか?
8-甲基-2-噻吩-2-基-喹啉-4-羧酸を含む廃棄物は専門的な廃棄処理が必要です。具体的には、廃棄物は密閉の容器に収集し、適切な危険物対策を講じて専門業者に引...
2-(1,3-二氧杂烷-2-基)噻唑の物理化学的性質は何ですか?
CAS番号24295-04-3の2-(1,3-二氧杂烷-2-基)噻唑は、結晶形態により白色粉末を呈します。分子量は208.23 g/molであり、水に溶けにくい...
L-beta-高酪氨酸塩酸塩は安全ですか?
L-beta-高酪氨酸塩酸塩自体は毒性は低く、しかし使用する際は適切な個人保護具を使用し、誤飲や皮膚への接触を避けることが推奨されます。
睡茄灯笼草素Cはどのように合成されますか?
睡茄灯笼草素Cは、シクラメンケチャナfromaceaeから抽出する方法や、化学合成法で合成することができます。典型的な化学合成法では、3β,22-二オキシエクス...
4-(嘧啶-2-基)哌嗪-1-羧酸叔丁酯はどのように保存すればよいですか?
4-(嘧啶-2-基)哌嗪-1-羧酸叔丁酯は直射日光を避けて、室温で保存するのが良いです。湿度を避けて密閉容器に入れて保管し、未使用の状態で長期保存することができ...
NBI-74330の主な用途は何ですか?
NBI-74330は主に薬理学研究および医療用途に使用されています。その主な用途は抗がん作用を有するため、がん治療の研究に使用されています。
6-トリフルオロメチル-2-クロロピリジン-4-ボリリック酸はどのように合成されますか?
6-トリフルオロメチル-2-クロロピリジン-4-ボリリック酸は、6-トリフルオロメチル-2-クロロピリジンとボリルリチウムを触媒なしで反応させることで合成するこ...
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.











![1,1',1'',1'''-[Disulfanediylbis(carbonothioylnitrilo)]tetraethane structure 1,1',1'',1'''-[Disulfanediylbis(carbonothioylnitrilo)]tetraethane structure](https://static.chemtradehub.com/structs/97-/97-77-8-f3e4.webp)


