Synthesis and characterization of 4-vinylimidazole ABA triblock copolymers utilizing a difunctional RAFT chain transfer agent

文献情報

出版日 2013-01-25
DOI 10.1039/C3PY00043E
インパクトファクター 5.582
著者

Michael H. Allen, Jr., Sean T. Hemp, Musan Zhang, Mingqiang Zhang, Adam E. Smith, Robert B. Moore, Timothy E. Long


原文を見る

要旨

Reversible addition–fragmentation chain transfer (RAFT) polymerization strategies enabled the unprecedented synthesis of 4-vinylimidazole (4VIM)-containing ABA triblock copolymers in glacial acetic acid. The synthesis of a novel, difunctional trithiocarbonate RAFT chain transfer agent (CTA) controlled the divergent RAFT polymerization of methacrylic and 4VIM monomers with controlled molecular weights and narrow polydispersity indices (PDIs). The triblock copolymers consisted of a low-Tg di(ethylene glycol) methyl ether methacrylate (DEGMEMA) center block (Mn = 26 000 g mol−1) and an amphoteric 4VIM external, mechanically reinforcing block (Mn = 6500–16 500 g mol−1). Varying the 4VIM content probed the influence of the triblock copolymer composition on the macromolecular thermomechanical and morphological properties. Dynamic mechanical analysis (DMA) of the triblock copolymers exhibited a rubbery plateau region over a wide temperature range (∼200 °C), which confirmed the establishment of microphase-separated morphologies with flow temperatures above 200 °C. Transmission electron microscopy (TEM), atomic force microscopy (AFM), and small-angle X-ray scattering (SAXS) collectively probed the solid state morphologies of the triblock copolymers; all techniques revealed phase separation at nanoscale dimensions. The triblock copolymers with 40 wt% 4VIM formed lamellar morphologies. Well-defined, amphoteric, 4VIM ABA triblock copolymers (PDIs < 1.10) with microphase-separated morphologies now permit imidazole-containing macromolecules of controlled architectures for emerging applications.

関連文献

Contents

Front/Back Matter

DOI: 10.1039/C003359F

Back matter

Front/Back Matter

DOI: 10.1039/C0CP90144J

Hydrogen bond networks in water and methanol with varying interaction strengths

Juliana Angeiras Batista da Silva, Francisco George Brady Moreira, Vivianni Marques Leite dos Santos, Ricardo Luiz Longo

2010-11-01 Paper

DOI: 10.1039/C0CP01204A

Low-temperature heat capacities of 1-alkyl-3-methylimidazolium bis(oxalato)borate ionic liquids and the influence of anion structural characteristics on thermodynamic properties

Miao Yang, Jun-Ning Zhao, Qing-Shan Liu, Li-Xian Sun, Pei-Fang Yan, Urs Welz-Biermann

2010-11-23 Paper

DOI: 10.1039/C0CP01744B

Back matter

Front/Back Matter

DOI: 10.1039/B926011K

Synthesis and transverse electromechanical characterization of single crystalline ZnO nanoleaves

Ya Yang, Qingliang Liao, Junjie Qi, Wen Guo

2009-11-13 Communication

DOI: 10.1039/B918326D

こちらもおすすめ

化合物よくある質問

除水剤ALT-201は安全ですか?

除水剤ALT-201は一般的に安全ですが、避けるべきは皮膚や目への接触です。適切な防護具を着用し、安全基準を守ることが重要です。

28770-01-62-(2-Isopropyl-1,3-o...
化合物よくある質問

「邻羟基阿托伐他汀内酯标准品」に適用される法規ガイドelinesは何ですか?

CAS番号163217-74-1の「邻羟基阿托伐他汀内酯标准品」は、GHS分類では危険物に分類されず、主にREACH規則とFDA/EPAの管理対象となります。R...

163217-74-1ortho-Hydroxy Atorva...
化合物よくある質問

メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩の主な用途は何ですか?

メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩は、医薬品や合成化学の研究に広く用いられます。また、特定の薬物の前...

2241594-15-8Methyl (3R)-3-amino-...
化合物よくある質問

トランス-4-メチルピロリジン-3-オール塩酸塩はどのように合成されますか?

トランス-4-メチルピロリジン-3-オール塩酸塩は、4-メチルピロリジンの塩酸塩化によって合成されます。一般的な合成方法では、4-メチルピロリジンを塩酸に加えて...

265108-42-7trans-4-Methylpyrrol...
化合物よくある質問

硫雜環丁烷-1,1-二氧化物は安全ですか?

硫雜環丁烷-1,1-二氧化物は安全ではありません。毒性は報告されていませんが、高温下で分解し、可燃性があるため、高圧ガスは注意が必要です。密閉した容器で保管し、...

5687-92-3Thietane 1,1-dioxide
化合物よくある質問

ブラエリリンの主な用途は何ですか?

ブラエリリンは主に医薬品製造における薬物アドベリンの合成材料として使用されます。また、研究用途や化学合成材料としても広く利用されています。

6054-10-02H, 8H-Benzo[1,2-b
化合物よくある質問

9-ヒドロキシエリプチシネ塩酸塩はどのように合成されますか?

9-ヒドロキシエリプチシネ塩酸塩は、エリプチシネから塩酸を添加することで合成されます。選択性は高いですが、収率は約70%です。

52238-35-49-Hydroxyellipticine...
化合物よくある質問

5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮の物理化学的性質は何ですか?

5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮のCAS番号は5621-86-3です。この化合物は白色の結晶性粉末で、分子量は415.03で...

5621-86-3[5-Chloro-2-(methyla...
化合物よくある質問

1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪はどのように保存すればよいですか?

1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪は、直射日光を避けて暗所に、室温(15-25℃)で保管し、密閉容器に入れることで安定性を保つことができます。

117132-44-21-[2-(4-Methoxy-phen...
化合物よくある質問

2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンの主な用途は何ですか?

2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンは、医薬品の合成、有機合成化学、および新材料の研究で使用され...

1073371-72-82-[3-(4-Methoxypheny...

掲載誌

Polymer Chemistry

Polymer Chemistry
CiteScore: 8.6
自己引用率: 7.3%
年間論文数: 457

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.

おすすめ化合物

おすすめサプライヤー

免責事項
このページに表示される学術雑誌情報は、参考および研究目的のみを目的としています。当社は雑誌出版社とは提携しておらず、投稿の取り扱いも行っておりません。出版に関するお問い合わせは、各雑誌出版社に直接ご連絡ください。
表示されている情報に誤りがある場合は、support@chemtradehub.com までご連絡ください。迅速に確認し、対応いたします。