Polysaccharide-stabilized core cross-linked polymer micelle analogues
文献情報
Daniel J. Krasznai, Timothy F. L. McKenna, Michael F. Cunningham, Pascale Champagne, Niels M. B. Smeets
A novel approach is presented for the synthesis of block-copolymers that resemble the architecture of a core cross-linked micelle. The polymers are synthesized from a combination of catalytic chain transfer polymerization (CCTP), thiol-Michael addition chemistry and reductive amination. A hydrophobic hyperbranched core is synthesized via CCTP of methyl methacrylate (MMA) and ethylene glycol dimethacrylate (EGDMA), which affords control over the polymer architecture and the degree of chain end-functionality. The vinyl unsaturations of the hyperbranched polymers are converted in nucleophilic pendant amines by thiol-Michael addition using cysteamine hydrochloride. A polysaccharide shell is grafted onto the hyperbranched core via reductive amination with dextran (DEX). The synthesized poly(MMA-co-EGDMA)-b-DEX polymers possess an amphiphilic character, are colloidally stable and resemble the topology of a core cross-linked micelle. The presented methodology provides a robust, modular, and tuneable approach towards the synthesis of amphiphilic core cross-linked micelle analogues.
関連文献
Heterogeneous dynamics of ionic liquids in confined films with varied film thickness
Yong-Lei Wang, Zhong-Yuan Lu
DOI: 10.1039/C4CP02843K
A DFT study on the reaction mechanism of dimerization of methyl methacrylate catalyzed by N-heterocyclic carbene
Yunxia Li, Yanyan Zhu, Wenjing Zhang, Donghui Wei, Yingying Ran, Qilin Zhao, Mingsheng Tang
DOI: 10.1039/C4CP02186J
Destabilization effect of transition metal fluorides on sodium borohydride
Georgios N. Kalantzopoulos, Matylda N. Guzik, Stefano Deledda, Jiri Muller, Bjørn C. Hauback
DOI: 10.1039/C4CP02899F
Flexible bonding between copper and nitric oxide: infrared photodissociation spectroscopy of copper nitrosyl cation complexes: [Cu(NO)n]+ (n = 1–5)
Lichen Wang, Guanjun Wang, Hui Qu, Zhen Hua Li, Mingfei Zhou
DOI: 10.1039/C4CP00557K
Pinacyanol chloride forms mesoscopic H- and J-aggregates in aqueous solution – a spectroscopic and cryo-transmission electron microscopy study
Hans v. Berlepsch, Kai Ludwig, Christoph Böttcher
DOI: 10.1039/C4CP00967C
Quantum Monte Carlo for noncovalent interactions: an efficient protocol attaining benchmark accuracy
Matúš Dubecký, René Derian, Petr Jurečka, Lubos Mitas, Michal Otyepka
DOI: 10.1039/C4CP02093F
The dynamic action mechanism of small cationic antimicrobial peptides
J. J. Lopez Cascales, R. D. Porasso
DOI: 10.1039/C4CP02537G
こちらもおすすめ
N-乙酰基-L-精氨酸はどのように合成されますか?
N-乙酰基-L-精氨酸は、L-精氨酸をエタノールと酸化アクリル酸で反応させて得られます。この合成過程では、酸化アクリル酸がL-精氨酸のN-アミノグループに結合す...
カウウェルパリミタートを含む廃棄物はどのように処理すべきですか?
カウウェルパリミタートの廃棄物は、化学廃棄物として適切に収集し、専門的な廃棄処理業者に委託します。処理には、有害物質の除去と環境への影響最小化が重要です。温度は...
タテライル1,4,8,11-テトラエチルアセートの代替品はありますか?
タテライル1,4,8,11-テトラエチルアセートの代替品として、他のエチルエステル化合物や、有機窒素化合物が考えられます。ただし、代替品の選択は目的や使用条件に...
異丁卡因を取り扱う際の実験室安全事項は何ですか?
異丁卡因は毒性があり、皮膚や目を刺激する可能性があります。作業中は保護目鏡、防護手袋、防護マスクを使用し、ドラフトチャンバーで扱うべきです。漏えいした場合、その...
4-氯-2-丙基吡啶を取り扱う際の実験室安全事項は何ですか?
4-氯-2-丙基吡啶は有毒で、吸入や皮膚接触を避けることが重要です。PPEとしてゴーグル、マスク、長袖のガウン、手袋を使用し、ドラフトチャンバーを用いて操作しま...
9,10-脱水阿霉素について適用される法規ガイドラインは何ですか?
CAS番号80996-23-2の9,10-脱水阿霉素は、GHS分類においては第3類毒性物質に分類され、REACH規則においてはカテゴリー1の急性毒性物質とされて...
4-(3-溴苯基)噻唑-2-甲酸の物理化学的性質は何ですか?
4-(3-溴苯基)噻唑-2-甲酸の分子量は265.01です。この化合物は水に微溶です。反応性は中程度で、酸性やアルカリ性の条件下で分解する可能性があります。
3-(4-塩素フェニル)-3-オキセタニアミン塩酸塩はどの業界で使用されていますか?
3-(4-塩素フェニル)-3-オキセタニアミン塩酸塩は、医薬業界、ポリマー業界、センサー業界、半導体業界などで使用されています。この化合物は薬物開発の一部として...
氮卓斯汀杂质Eを取り扱う際の実験室安全事項は何ですか?
氮卓斯汀杂质E(CAS番号: 20526-97-0)を扱う際は、ゴーグルとシールド付きの手袋を使用し、漏洩がある場合はドラフトチャンバーを使用して処理することを...
デシシボチル-n-ブチルボルテゾミブはどのように保存すればよいですか?
デシシボチル-n-ブチルボルテゾミブは室温で保管し、直日光から遠ざけて密栓容器に保管することが推奨されます。
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.










![Ethyl 2-[(3-bromo-4-pyridinyl)sulfanyl]-2-methylpropanoate structure Ethyl 2-[(3-bromo-4-pyridinyl)sulfanyl]-2-methylpropanoate structure](https://static.chemtradehub.com/structs/135/1352794-86-5-a8aa.webp)



