Efficient white polymer light-emitting diodes employing a silver nanowire–polymer composite electrode
文献情報
Zhibin Yu, Chia-hao Chang, Weili Hu, Xiaofan Niu, Qi Chen, Qibing Pei
White polymer phosphorescent light-emitting diodes have been fabricated employing silver nanowire (AgNW)–polymer composite substrates. Solution processing is used to form all the layers in the devices, except for the cathode, for potentially low fabrication cost. The current efficiency in the front viewing direction is 20.3 cd A−1 for devices comprising two complementary dopants (bis[(4,6-difluorophenyl)-pyridinato-N,C2] (picolinato)Ir(III) (FIrpic) with sky blue emission and bis(1-phenylisoquinoline)(acetylacetonate) (Ir(piq)) for red emission). The efficiency is 42.3 cd A−1 at 4000 cd cm−2 for devices comprising the three primary colors (FIrpic, Ir(piq), and tris(2-(4-tolyl)pyridinato-N,C2) (Ir(mppy)3), with green emission). These values are, respectively, 35% and 41% higher than those of control devices fabricated on indium tin oxide (ITO) coated on glass substrates. The enhanced current efficiency is attributed to enhanced light out-coupling thanks to light scattering by the silver nanowires embedded in the transparent composite electrode.
関連文献
Selective internuclear coupling estimation in the solid-state NMR of multiple-spin systems
Andrea C. Sauerwein, Maria Concistrè, Malcolm H. Levitt
DOI: 10.1039/C0CP01262A
Vibrationally promoted electron emission at a metal surface: electron kinetic energy distributions
Jerry LaRue, Tim Schäfer, Daniel Matsiev, Luis Velarde, N. Hendrik Nahler, Daniel J. Auerbach
DOI: 10.1039/C0CP01626H
Impedance spectroscopy of H and OH adsorption on stepped single-crystal platinumelectrodes in alkaline and acidic media
K. J. P. Schouten, M. J. T. C. van der Niet, M. T. M. Koper
DOI: 10.1039/C0CP00104J
Reaction pathways for hydrogen desorption from magnesium hydride/hydroxide composites: bulk and interface effects
F. Leardini, J. R. Ares, J. Bodega, J. F. Fernández, I. J. Ferrer, C. Sánchez
DOI: 10.1039/B912964B
Temperature-dependent ozonolysis kinetics of selected alkenes in the gas phase: an experimental and structure–activity relationship (SAR) study
Kimberley E. Leather, Max R. McGillen, Carl J. Percival
DOI: 10.1039/B919731A
Fast and ultrafast spectroscopic investigation of tetracycline derivatives in organic and aqueous media
Benedetta Carlotti, Domenico Fuoco, Fausto Elisei
DOI: 10.1039/C0CP00044B
Hydrogen bond networks in water and methanol with varying interaction strengths
Juliana Angeiras Batista da Silva, Francisco George Brady Moreira, Vivianni Marques Leite dos Santos, Ricardo Luiz Longo
DOI: 10.1039/C0CP01204A
こちらもおすすめ
「邻羟基阿托伐他汀内酯标准品」に適用される法規ガイドelinesは何ですか?
CAS番号163217-74-1の「邻羟基阿托伐他汀内酯标准品」は、GHS分類では危険物に分類されず、主にREACH規則とFDA/EPAの管理対象となります。R...
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩の主な用途は何ですか?
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩は、医薬品や合成化学の研究に広く用いられます。また、特定の薬物の前...
トランス-4-メチルピロリジン-3-オール塩酸塩はどのように合成されますか?
トランス-4-メチルピロリジン-3-オール塩酸塩は、4-メチルピロリジンの塩酸塩化によって合成されます。一般的な合成方法では、4-メチルピロリジンを塩酸に加えて...
硫雜環丁烷-1,1-二氧化物は安全ですか?
硫雜環丁烷-1,1-二氧化物は安全ではありません。毒性は報告されていませんが、高温下で分解し、可燃性があるため、高圧ガスは注意が必要です。密閉した容器で保管し、...
9-ヒドロキシエリプチシネ塩酸塩はどのように合成されますか?
9-ヒドロキシエリプチシネ塩酸塩は、エリプチシネから塩酸を添加することで合成されます。選択性は高いですが、収率は約70%です。
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮の物理化学的性質は何ですか?
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮のCAS番号は5621-86-3です。この化合物は白色の結晶性粉末で、分子量は415.03で...
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪はどのように保存すればよいですか?
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪は、直射日光を避けて暗所に、室温(15-25℃)で保管し、密閉容器に入れることで安定性を保つことができます。
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンの主な用途は何ですか?
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンは、医薬品の合成、有機合成化学、および新材料の研究で使用され...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














