Efficient synthesis of ordered organo-layered double hydroxides
文献情報
H. Christopher Greenwell, William Jones, Sarah L. Rugen-Hankey, Peter J. Holliman, Richard L. Thompson
Layered double hydroxides (LDHs) intercalated with terephthalate anions represent one of the most studied organo-LDH systems. We have prepared MgAl terephthalate-LDHs using an efficient hydrothermal approach from the respective metal hydroxide precursors. In contrast to terephthalate LDHs prepared by other methods, and as a result of the absence of competing anions, a large excess of terephthalate acid was not required, thereby allowing for an environmentally attractive synthetic route. The LDHs were prepared from starting reactant Mg/Al ratios of 2, 3, 4 and 5 and were found to exhibit unusually high degrees of order as evidenced from X-ray diffraction studies, especially at the Mg/Al ratio of 2. Further analysis of the X-ray diffraction data showed that, as in previous studies, three distinct interlayer arrangements could be identified. Scanning electron microscopy was used to compare and contrast the morphology of crystals formed with those prepared by other methods of LDH synthesis and confirms the high degree of structural integrity achieved by the synthetic method.
関連文献
The dynamics of adsorption and dissociation of N2 in a monolayer of iron on W(110)
I. Goikoetxea
DOI: 10.1039/C5CP02051D
Influence of relative humidity on heterogeneous kinetics of NO2 on kaolin and hematite
Yongchun Liu, Chong Han, Jinzhu Ma, Xiaolei Bao, Hong He
DOI: 10.1039/C5CP02223A
Electronic structure engineering of various structural phases of phosphorene
Sumandeep Kaur, Ashok Kumar, Sunita Srivastava, K. Tankeshwar
DOI: 10.1039/C6CP01252C
Ammonia mobility in chabazite: insight into the diffusion component of the NH3-SCR process
Iain Hitchcock, Misbah Sarwar, Ian P. Silverwood, Sheena Hindocha, Andrew P. E. York
DOI: 10.1039/C6CP01160H
Energetics and kinetics of Cu atoms and clusters on the Si(111)-7 × 7 surface: first-principles calculations
Wei-Guang Chen, Ming-Sheng Tang
DOI: 10.1039/C6CP01919F
Understanding the light soaking effect of ZnMgO buffer in CIGS solar cells
Suncheul Kim, Chang-Soo Lee, Seungtae Kim, R. B. V. Chalapathy, Essam A. Al-Ammar, Byung Tae Ahn
DOI: 10.1039/C5CP01758K
The importance of dynamics studies on the design of sandwich structures: a CrB24 case
Lei Liu, Edison Osorio
DOI: 10.1039/C6CP02445A
Two-photon-absorption DNA sensitization via solvated electron production: unraveling photochemical pathways by molecular modeling and simulation
Elise Dumont
DOI: 10.1039/C6CP02592G
The catalytic effect of water, water dimers and water trimers on H2S + 3O2 formation by the HO2 + HS reaction under tropospheric conditions
Tianlei Zhang, Chen Yang, Xukai Feng, Jiaxin Kang, Liang Song, Yousong Lu, Zhiyin Wang, Qiong Xu, Wenliang Wang, Zhuqing Wang
DOI: 10.1039/C6CP00654J
Mechanism and microstructures in Ga2O3 pseudomartensitic solid phase transition
Sheng-Cai Zhu, Shu-Hui Guan, Zhi-Pan Liu
DOI: 10.1039/C6CP03673B
こちらもおすすめ
5-苄基四氢吡咯并[3,4-c]吡咯-1,3[2H,3ah]-二酮の主な用途は何ですか?
5-苄基四氢吡咯并[3,4-c]吡咯-1,3[2H,3ah]-二酮は、主に薬理学的研究と合成化学に使用されます。また、特定の医薬品の合成原材料としても利用されま...
唾液酸路易ス Aを取り扱う際の実験室安全事項は何ですか?
唾液酸路易ス Aの取り扱いでは、個別の防護具(PPE)が必要で、手袋、顔面保護具、防塵マスクを着用します。ドラフトチャンバーを使用し、漏洩時の適切な処理を行うこ...
タルトブチル ((1-(2-クロロアセチル)ピペリジン-4-イルメチル)カーバamatはどの業界で使用されていますか?
タルトブチル ((1-(2-クロロアセチル)ピペリジン-4-イルメチル)カーバamatは、医薬品業界、ポリマー業界、センサー技術、半導体業界などで使用されていま...
3-烯丙基-2-羟基苯甲醛の物理化学的性質は何ですか?
3-烯丙基-2-羟基苯甲醛のCAS番号は24019-66-7です。物化性質としては、白色結晶性粉末で、分子量は174.22です。この化合物は水に溶けやすく、反応...
乳清酸 Potassium Orotateとは何ですか?
乳清酸 Potassium Orotateは、CAS番号24598-73-0の化合物で、乳清酸と Potassium(カリウム)による塩基です。化学式はC7H7...
4-甲基苯磺酸异丙酯はどの業界で使用されていますか?
4-甲基苯磺酸异丙酯は医薬品業界で広く使用されています。また、ポリマーの増塑剤や半導体製造におけるセンサー材料としても使用されることがあります。
6-(3- Florobenzen)-N-[1-(2,2,2- Trifluoroethyl)-4-Piperidinyl]-3-Pyridinycarboxamideはどの業界で使用されていますか?
6-(3-氟苯基)-N-[1-(2,2,2-三氟乙基)-4-哌啶基]-3-吡啶羧酰胺は医薬品産業で広く使用されており、その特性は抗炎症作用や抗ウイルス作用など、...
左西孟旦はどのように合成されますか?
左西孟旦は、3-[(2-メチルフェニル)-2-(4-メチルフェニル)-1-オキシエチル]-1,2,4-トリTürkiyeン-5-カルボン酸と4-メチルフェニル-...
3-乙氧基哌啶盐酸盐に適用される法規ガイドラインは何ですか?
CAS番号1159826-79-5の3-乙氧基哌啶盐酸盐は、GHS分類ではイエローカテゴリーに分類され、毒性物質として扱われます。REACH規則では、製造または...
Diethyl (hydroxymethyl)phosphonateの主な用途は何ですか?
Diethyl (hydroxymethyl)phosphonateは、医薬品の製造や農薬、合成化学の一部として利用されます。
掲載誌
Green Chemistry

Green Chemistry provides a unique forum for the publication of innovative research on the development of alternative green and sustainable technologies. The scope of Green Chemistry is based on, but not limited to, the definition proposed by Anastas and Warner (Green Chemistry: Theory and Practice, P T Anastas and J C Warner, Oxford University Press, Oxford, 1998). Green chemistry is the utilisation of a set of principles that reduces or eliminates the use or generation of hazardous substances in the design, manufacture and application of chemical products. Green Chemistry is at the frontiers of this continuously-evolving interdisciplinary science and publishes research that attempts to reduce the environmental impact of the chemical enterprise by developing a technology base that is inherently non-toxic to living things and the environment. Submissions on all aspects of research relating to the endeavour are welcome. The journal publishes original and significant cutting-edge research that is likely to be of wide general appeal. To be published, work must present a significant advance in green chemistry. Papers must contain a comparison with existing methods and demonstrate advantages over those methods before publication can be considered. For more information please see this Editorial. Coverage includes the following, but is not limited to: Design (e.g. biomimicry, design for degradation/recycling/reduced toxicity…) Reagents & Feedstocks (e.g. renewables, CO2, solvents, auxiliary agents, waste utilization…) Synthesis (e.g. organic, inorganic, synthetic biology…) Catalysis (e.g. homogeneous, heterogeneous, enzyme, whole cell…) Process (e.g. process design, intensification, separations, recycling, efficiency…) Energy (e.g. renewable energy, fuels, photovoltaics, fuel cells, energy storage, energy carriers…) Applications (e.g. electronics, dyes, consumer products, coatings, pharmaceuticals, preservatives, building materials, chemicals for industry/agriculture/mining…) Impact (e.g. safety, metrics, LCA, sustainability, (eco)toxicology…) Green chemistry is, by definition, a continuously-evolving frontier. Therefore, the inclusion of a particular material or technology does not, of itself, guarantee that a paper is suitable for the journal. To be suitable, the novel advance should have the potential for reduced environmental impact relative to the state of the art. Green Chemistry does not normally deal with research associated with 'end-of-pipe' or remediation issues.














