Mechanism of cooperative behaviour in systems of slow and fast molecular motors

文献情報

出版日 2009-05-11
DOI 10.1039/B900968J
インパクトファクター 3.676
著者

Adam G. Larson, Eric C. Landahl, Sarah E. Rice


原文を見る

要旨

Two recent theoretical advances have described cargo transport by multiple identical motors and by multiple oppositely directed, but otherwise identical motors [M. J. Muller, S. Klumpp and R. Lipowsky, Proc. Natl. Acad. Sci. U. S. A., 2008, 105(12), 4609–4614; S. Klumpp and R. Lipowsky, Proc. Natl. Acad. Sci. U. S. A., 2005, 102(48), 17284–17289]. Here, we combine a similar theoretical approach with a simple experiment to describe the behaviour of a system comprised of slow and fast molecular motors having the same directionality. We observed the movement of microtubules by mixtures of slow and fast kinesin motors attached to a glass coverslip in a classic sliding filament assay. The motors are identical, except that the slow ones contain five point mutations that collectively reduce their velocity ∼15-fold without compromising maximal ATPase activity. Our results indicate that a small fraction of fast motors are able to accelerate the dissociation of slow motors from microtubules. Because of this, a sharp, highly cooperative transition occurs from slow to fast microtubule movement as the relative number of fast motors in the assay is increased. Microtubules move at half-maximal velocity when only 15% of the motors in the assay are fast. Our model indicates that this behaviour depends primarily on the relative motor velocities and the asymmetry between their forward and backward dissociation forces. It weakly depends on the number of motors and their processivity. We predict that movement of cargoes bound to two types of motors having very different velocities will be dominated by one or the other motor. Therefore, cargoes can potentially undergo abrupt changes in movement in response to regulatory mechanisms acting on only a small fraction of motors.

関連文献

Chemically diverse polymer microarrays and high throughput surface characterisation: a method for discovery of materials for stem cell culture

A. D. Celiz, J. G. W. Smith, A. K. Patel, R. Langer, D. G. Anderson, D. A. Barrett, L. E. Young, M. C. Davies, C. Denning, M. R. Alexander

2014-05-12 Communication

DOI: 10.1039/C4BM00054D

Thiazolo[5,4-d]thiazole-based organic sensitizers with improved spectral properties for application in greenhouse-integrated dye-sensitized solar cells

Alessio Dessì, Maria Laura Parisi, Luigi Vesce, Paolo Mariani, Babak Taheri, Manuela Ciocca, Aldo Di Carlo, Lorenzo Zani, Gianna Reginato

2020-02-25 Paper

DOI: 10.1039/D0SE00124D

Inside back cover

Cover

DOI: 10.1039/D0SE90037K

Electrochemical synthesis of titanium nitride nanoparticles onto titanium foil for electrochemical supercapacitors with ultrafast charge/discharge

Sajid Ali Ansari, Nazmul Abedin Khan, Zubair Hasan, A. A. Shaikh, Farhana K. Ferdousi, Hasi Rani Barai, Nasrin Siraj Lopa, Md. Mahbubur Rahman

2020-03-19 Paper

DOI: 10.1039/D0SE00049C

A safe Li–Se battery in an ionic liquid-based electrolyte operating at 25–70 °C by using a N,S,O tri-doped mesoporous carbon host material

Cuong Nguyen, Anders J. Barlow, Pavel V. Cherepanov, Maria Forsyth, Patrick C. Howlett, Douglas R. MacFarlane

2020-02-27 Paper

DOI: 10.1039/C9SE01074B

Survival, differentiation, and migration of high-purity mouse embryonic stem cell-derived progenitor motor neurons in fibrin scaffolds after sub-acute spinal cord injury

D. A. McCreedy, T. S. Wilems, H. Xu, J. C. Butts, C. R. Brown, A. W. Smith, S. E. Sakiyama-Elbert

2014-06-30 Paper

DOI: 10.1039/C4BM00106K

Green hydrogen from anion exchange membrane water electrolysis: a review of recent developments in critical materials and operating conditions

Hamish Andrew Miller, Karel Bouzek, Jaromir Hnat, Stefan Loos, Christian Immanuel Bernäcker, Thomas Weißgärber, Lars Röntzsch, Jochen Meier-Haack

2020-03-05 Review Article

DOI: 10.1039/C9SE01240K

In vitro model alveoli from photodegradable microsphere templates

Katherine J. R. Lewis, Mark W. Tibbitt, Yi Zhao, Kelsey Branchfield, Xin Sun, Vivek Balasubramaniam, Kristi S. Anseth

2015-03-27 Paper

DOI: 10.1039/C5BM00034C

こちらもおすすめ

化合物よくある質問

N-乙酰基-L-精氨酸はどのように合成されますか?

N-乙酰基-L-精氨酸は、L-精氨酸をエタノールと酸化アクリル酸で反応させて得られます。この合成過程では、酸化アクリル酸がL-精氨酸のN-アミノグループに結合す...

155-84-0N~2~-Acetyl-L-argini...
化合物よくある質問

カウウェルパリミタートを含む廃棄物はどのように処理すべきですか?

カウウェルパリミタートの廃棄物は、化学廃棄物として適切に収集し、専門的な廃棄処理業者に委託します。処理には、有害物質の除去と環境への影響最小化が重要です。温度は...

81760-45-4Kahweol palmitate
化合物よくある質問

タテライル1,4,8,11-テトラエチルアセートの代替品はありますか?

タテライル1,4,8,11-テトラエチルアセートの代替品として、他のエチルエステル化合物や、有機窒素化合物が考えられます。ただし、代替品の選択は目的や使用条件に...

126320-57-8Tetraethyl 1,4,8,11-...
化合物よくある質問

異丁卡因を取り扱う際の実験室安全事項は何ですか?

異丁卡因は毒性があり、皮膚や目を刺激する可能性があります。作業中は保護目鏡、防護手袋、防護マスクを使用し、ドラフトチャンバーで扱うべきです。漏えいした場合、その...

94-14-4Isobutamben
化合物よくある質問

4-氯-2-丙基吡啶を取り扱う際の実験室安全事項は何ですか?

4-氯-2-丙基吡啶は有毒で、吸入や皮膚接触を避けることが重要です。PPEとしてゴーグル、マスク、長袖のガウン、手袋を使用し、ドラフトチャンバーを用いて操作しま...

93856-98-54-Chloro-2-propylpyr...
化合物よくある質問

9,10-脱水阿霉素について適用される法規ガイドラインは何ですか?

CAS番号80996-23-2の9,10-脱水阿霉素は、GHS分類においては第3類毒性物質に分類され、REACH規則においてはカテゴリー1の急性毒性物質とされて...

80996-23-29,10-Anhydroadriamyc...
化合物よくある質問

4-(3-溴苯基)噻唑-2-甲酸の物理化学的性質は何ですか?

4-(3-溴苯基)噻唑-2-甲酸の分子量は265.01です。この化合物は水に微溶です。反応性は中程度で、酸性やアルカリ性の条件下で分解する可能性があります。

808128-00-94-(3-Bromophenyl)-1,...
化合物よくある質問

3-(4-塩素フェニル)-3-オキセタニアミン塩酸塩はどの業界で使用されていますか?

3-(4-塩素フェニル)-3-オキセタニアミン塩酸塩は、医薬業界、ポリマー業界、センサー業界、半導体業界などで使用されています。この化合物は薬物開発の一部として...

1245782-61-93-(4-Chlorophenyl)-3...
化合物よくある質問

氮卓斯汀杂质Eを取り扱う際の実験室安全事項は何ですか?

氮卓斯汀杂质E(CAS番号: 20526-97-0)を扱う際は、ゴーグルとシールド付きの手袋を使用し、漏洩がある場合はドラフトチャンバーを使用して処理することを...

20526-97-03-(4-chlorobenzylide...
化合物よくある質問

デシシボチル-n-ブチルボルテゾミブはどのように保存すればよいですか?

デシシボチル-n-ブチルボルテゾミブは室温で保管し、直日光から遠ざけて密栓容器に保管することが推奨されます。

1104011-35-9Desisobutyl-n-butyl ...

掲載誌

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
自己引用率: 10.3%
年間論文数: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

おすすめ化合物

おすすめサプライヤー

免責事項
このページに表示される学術雑誌情報は、参考および研究目的のみを目的としています。当社は雑誌出版社とは提携しておらず、投稿の取り扱いも行っておりません。出版に関するお問い合わせは、各雑誌出版社に直接ご連絡ください。
表示されている情報に誤りがある場合は、support@chemtradehub.com までご連絡ください。迅速に確認し、対応いたします。