Recent advances in immobilization methods of antibodies on solid supports
文献情報
Yongwon Jung
Antibody immobilization on a solid support is an essential process for the development of most immune-based assay systems. The choice of the immobilization method greatly affects antibody–antigen interactions on the assay surface. For the past several years, numerous strategies have been reported to control antibody immobilization, mainly by directing the orientation, stability, and density of bound antibodies on different assay platforms. Here we discuss recent developments in antibody immobilization methods with a particular focus on the strengths and limitations of reported approaches, and thereby provide a useful guideline for the selection of suitable antibody coupling procedures.
関連文献
A computational mechanistic investigation of hydrogen production in water using the [RhIII(dmbpy)2Cl2]+/[RuII(bpy)3]2+/ascorbic acid photocatalytic system
Megumi Kayanuma, Chantal Daniel, Fabrice Odobel
DOI: 10.1039/C4CP04949G
Very low amount of TiO2 on N-doped carbon nanotubes significantly improves oxygen reduction activity and stability of supported Pt nanoparticles
Anqi Zhao, Justus Masa, Wei Xia
DOI: 10.1039/C5CP00369E
Electrochemistry at highly oriented pyrolytic graphite (HOPG): lower limit for the kinetics of outer-sphere redox processes and general implications for electron transfer models
Guohui Zhang, Anatolii S. Cuharuc, Aleix G. Güell, Patrick R. Unwin
DOI: 10.1039/C5CP00383K
Ion density deviations in semipermeable ionic microcapsules
Qiyun Tang, Alan R. Denton
DOI: 10.1039/C5CP00974J
Outside rules inside: the role of electron-active substituents in thiophene-based heterophenoquinones
L. Brambilla, E. Parisini, C. Castiglioni
DOI: 10.1039/C4CP05748A
Collisional relaxation of apocarotenals: identifying the S* state with vibrationally excited molecules in the ground electronic state S0*
Florian Ehlers, Mirko Scholz, Jens Schimpfhauser, Jürgen Bienert, Kawon Oum, Thomas Lenzer
DOI: 10.1039/C4CP05600K
Vibrational models for a crystal with 36 water molecules in the unit cell: IR spectra from experiment and calculation
Pavlin D. Mitev, Anders Eriksson, Jean-François Boily, Kersti Hermansson
DOI: 10.1039/C5CP00390C
Elucidating the conformational energetics of glucose and cellobiose in ionic liquids
Vivek S. Bharadwaj, Timothy C. Schutt, Timothy C. Ashurst, C. Mark Maupin
DOI: 10.1039/C5CP00118H
Electronic structures and current conductivities of B, C, N and F defects in amorphous titanium dioxide
Hieu H. Pham, Lin-Wang Wang
DOI: 10.1039/C5CP00890E
こちらもおすすめ
4'-ブロモビフェニル-3-メトークシーディ.ActionBarはどのように保存すればよいですか?
4'-ブロモビフェニル-3-メトークシーディ.ActionBarは、冷暗所で、直射日光を避け、密栓の容器に保存し、遠隔場所に保管してください。温度は常温(0〜2...
2-異丙基フェニルヒドラジン塩酸塩とは何ですか?
2-異丙基フェニルヒドラジン塩酸塩は、CAS番号58928-82-8を有する化合物で、構造式はC11H14N2HClです。これは塩基性化合物であり、水に溶けやす...
5-(4-クロロフェニル)-4H-1,2,4-三氮唑-3-アミンを取り扱う際の実験室安全事項は何ですか?
5-(4-クロロフェニル)-4H-1,2,4-三氮唑-3-アミンは取り扱いに注意が必要です。PPEとして防塵マスク、ゴーグル、手袋を使用し、ドラフトチャンバーを...
去甲基雷贝拉唑硫醚はどのように合成されますか?
去甲基雷贝拉唑硫醚は、ベンジミダゾール硫化物と3-メチル-4-ピリジノールの反応によって合成されます。具体的には、2-チオキシドベンジミダゾールと3-メチル-4...
2-ブロモ-5-フロロ-N-(2-フェノールメチル)ベンゼンウレアは安全ですか?
2-ブロモ-5-フロロ-N-(2-フェノールメチル)ベンゼンウレアは、毒性や刺激性の実験データに基づき、適切な取扱いと防護措置を講じることで安全に使用できます。...
対甲苯磺酸酯-四聚乙二醇-四氢吡喃醚の物理化学的性質は何ですか?
対甲苯磺酸酯-四聚乙二醇-四氢吡喃醚のCAS番号は86259-89-4です。この化合物は無色の液体で、分子量は約724.8です。高濃度では溶血性が報告されており...
2-(3-(二氟甲基)-4-氟苯基)-4,4,5,5-四甲基-1,3,2-二噁硼戊環はどのように保存すればよいですか?
2-(3-(二氟甲基)-4-氟苯基)-4,4,5,5-四甲基-1,3,2-二噁硼戊環は、室温で暗い場所に保管し、直射日光から遠ざけ、容器は密閉状態で保存してくだ...
6-アミノ-5-クロロ-2-シクロプロピルピリミジンカルボン酸の代替品はありますか?
この化合物の代替品には、ピロリミジン酸やその類似物、またピロリミジンカルボン酸の他の異性体があります。これらの代替品は、特定の化学反応や目的に応じて選択すること...
5-クロロベンゾ[1,3]二オキセイン-4-アミンに適用される法規ガイドラインは何ですか?
5-クロロベンゾ[1,3]二オキセイン-4-アミンはCAS番号379228-45-2に該当します。この化合物はGHS分類でH314(接触により急性毒性がある)と...
掲載誌
Analyst

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.











![3,7-Di(1,1':3',1''-terphenyl-5'-yl)-10,11,12,13-tetrahydrodiindeno[7,1-de:1',7'-fg][1,3,2]dioxaphosphocin-5-ol 5-oxide structure 3,7-Di(1,1':3',1''-terphenyl-5'-yl)-10,11,12,13-tetrahydrodiindeno[7,1-de:1',7'-fg][1,3,2]dioxaphosphocin-5-ol 5-oxide structure](https://static.chemtradehub.com/structs/135/1352810-38-8-3f10.webp)


