Plasma parameter and film casting optimization for the determination of particulate matter in a sol–gel matrix by radiofrequency glow discharge optical emission spectrometry (rf-GD-OES)
文献情報
Tim M. Brewer, W. Clay Davis, R. Kenneth Marcus
Solids analysis has typically suffered from the lack of true analytical blanks and the inability to study particulate solids in their native state. Reported here is an approach to the analysis of particulate matter entrapped in a sol–gel matrix by radiofrequency glow discharge optical emission spectroscopy (rf-GD-OES). Sol–gel glasses are synthesized by acid-catalyzed condensation of methyltrimethoxysilane (MTMOS) and spun cast onto glass substrates. Slurries of powdered NIST standard reference materials (SRMs) 1884a Portland Cement and 1648 Urban Particulate Matter were incorporated into the films and analyzed for both main and trace element components. Cast films were analyzed to determine the discharge operating conditions and effects of particle size and deposited layer thickness while monitoring optical emission lines of a number of analytes. Using the sol–gel method, analytical blanks were obtained by use of an undoped sol–gel. Detection limits were determined for minor elements using background/blank subtraction and were found to be in the range of 1–12 μg g−1 in Portland Cement for elements Al, Ca, P, Mn and Fe, which corresponds to single-nanogram absolute detection limits.
関連文献
Dissolved chloride markedly changes the nanostructure of the protic ionic liquids propylammonium and ethanolammonium nitrate
Thomas Murphy, Samantha K. Callear, Gregory G. Warr, Rob Atkin
DOI: 10.1039/C5CP06947E
Excitation dependent Raman studies of self-seeded grown InN nanoparticles with different carrier concentration
Kishore K. Madapu, S. R. Polaki, Sandip Dhara
DOI: 10.1039/C6CP02405J
Nanoparticles in ionic liquids: interactions and organization
Zhiqi He, Paschalis Alexandridis
DOI: 10.1039/C5CP01620G
Heads or tails: how do chemically substituted fullerenes melt?
DOI: 10.1039/C6CP01333C
Hydrogen adsorption on two catalysts for the ortho- to parahydrogen conversion: Cr-doped silica and ferric oxide gel
Monika Hartl, Robert Chad Gillis, Luke Daemen, Daniel P. Olds, Katherine Page, Stefan Carlson, Yongqiang Cheng, Thomas Hügle, Erik B. Iverson, A. J. Ramirez-Cuesta, Yongjoong Lee, Günter Muhrer
DOI: 10.1039/C6CP01154C
Nano-size scaling of alloy intra-particle vs. inter-particle separation transitions: prediction of distinctly interface-affected critical behaviour
M. Polak, L. Rubinovich
DOI: 10.1039/C6CP02444K
A computational study of the quantum transport properties of a Cu–CNT composite
Mahdi Ghorbani-Asl, Paul D. Bristowe, Krzysztof Koziol
DOI: 10.1039/C5CP01470K
In situ investigation of mesoporous silicon oxidation kinetics using infrared emittance spectroscopy
Benjamin Bardet, Domingos De Sousa Meneses, Thomas Defforge, Jérôme Billoué, Gaël Gautier
DOI: 10.1039/C6CP02086K
Mesoporous SnO2 single crystals as an effective electron collector for perovskite solar cells
Xiaoli Zheng, Yang Bai, Zilong Wang
DOI: 10.1039/C5CP01534K
こちらもおすすめ
5-苄基四氢吡咯并[3,4-c]吡咯-1,3[2H,3ah]-二酮の主な用途は何ですか?
5-苄基四氢吡咯并[3,4-c]吡咯-1,3[2H,3ah]-二酮は、主に薬理学的研究と合成化学に使用されます。また、特定の医薬品の合成原材料としても利用されま...
唾液酸路易ス Aを取り扱う際の実験室安全事項は何ですか?
唾液酸路易ス Aの取り扱いでは、個別の防護具(PPE)が必要で、手袋、顔面保護具、防塵マスクを着用します。ドラフトチャンバーを使用し、漏洩時の適切な処理を行うこ...
タルトブチル ((1-(2-クロロアセチル)ピペリジン-4-イルメチル)カーバamatはどの業界で使用されていますか?
タルトブチル ((1-(2-クロロアセチル)ピペリジン-4-イルメチル)カーバamatは、医薬品業界、ポリマー業界、センサー技術、半導体業界などで使用されていま...
3-烯丙基-2-羟基苯甲醛の物理化学的性質は何ですか?
3-烯丙基-2-羟基苯甲醛のCAS番号は24019-66-7です。物化性質としては、白色結晶性粉末で、分子量は174.22です。この化合物は水に溶けやすく、反応...
乳清酸 Potassium Orotateとは何ですか?
乳清酸 Potassium Orotateは、CAS番号24598-73-0の化合物で、乳清酸と Potassium(カリウム)による塩基です。化学式はC7H7...
4-甲基苯磺酸异丙酯はどの業界で使用されていますか?
4-甲基苯磺酸异丙酯は医薬品業界で広く使用されています。また、ポリマーの増塑剤や半導体製造におけるセンサー材料としても使用されることがあります。
6-(3- Florobenzen)-N-[1-(2,2,2- Trifluoroethyl)-4-Piperidinyl]-3-Pyridinycarboxamideはどの業界で使用されていますか?
6-(3-氟苯基)-N-[1-(2,2,2-三氟乙基)-4-哌啶基]-3-吡啶羧酰胺は医薬品産業で広く使用されており、その特性は抗炎症作用や抗ウイルス作用など、...
左西孟旦はどのように合成されますか?
左西孟旦は、3-[(2-メチルフェニル)-2-(4-メチルフェニル)-1-オキシエチル]-1,2,4-トリTürkiyeン-5-カルボン酸と4-メチルフェニル-...
3-乙氧基哌啶盐酸盐に適用される法規ガイドラインは何ですか?
CAS番号1159826-79-5の3-乙氧基哌啶盐酸盐は、GHS分類ではイエローカテゴリーに分類され、毒性物質として扱われます。REACH規則では、製造または...
Diethyl (hydroxymethyl)phosphonateの主な用途は何ですか?
Diethyl (hydroxymethyl)phosphonateは、医薬品の製造や農薬、合成化学の一部として利用されます。
掲載誌
Journal of Analytical Atomic Spectrometry

The Journal of Analytical Atomic Spectrometry (JAAS) is the central journal for publishing innovative research on fundamentals, instrumentation, and methods in the determination, speciation and isotopic analysis of (trace) elements within all fields of application. This includes, but is not restricted to, the most recent progress, developments and achievements in all forms of atomic and elemental detection, isotope ratio determination, molecular analysis, plasma-based analysis and X-ray techniques. The journal welcomes full papers, communications, technical notes, critical and tutorial review articles, editorials, and comments, in addition to the Atomic Spectrometry Updates (ASU) literature reviews that are prepared by an expert panel. Submissions are welcome in the following areas, but note this list reflects the current scope and authors are strongly encouraged to contact the Editorial team if they believe that their work offers potentially new and emerging research relevant to the journal remit: Fundamental studies in the following. New and existing sources for atomic emission, absorption, fluorescence and mass spectrometry and those that provide both atomic and molecular information Sample introduction techniques for solids, liquids, gases Improvements in sensitivity, selectivity, precision, accuracy and/or robustness Isotope ratio measurements, including techniques for improving precision and mass bias correction Single channel and multichannel simultaneous detection systems Chemometrics, statistics, calibration techniques and internal standardisation Theoretical and numerical modelling of fundamental processes related to all of the above methodologies Novel or improved methodologies in areas of application including, but not limited to the following. Biosciences, including elemental, speciation and isotopic analysis in biological systems, immunoassays based on metal-labeled antibodies, bio-imaging, and nanoparticle toxicology Geochemistry Environmental science Materials science, including engineered nanoparticles and quantum dots Metrology, including reference materials Forensic analysis Food and agricultural sciences Energy Archaeometry Molecular analysis. Molecular sources for elemental and isotopic analysis Atomic sources for molecular analysis Atomic and molecular techniques simultaneously used for complementary chemical information All contributions are judged on originality and quality of scientific content, and appropriateness of length to content of new science.











![Ethyl 5-[({[(2-methyl-2-propanyl)oxy]carbonyl}amino)methyl]-1,2-oxazole-3-carboxylate structure Ethyl 5-[({[(2-methyl-2-propanyl)oxy]carbonyl}amino)methyl]-1,2-oxazole-3-carboxylate structure](https://static.chemtradehub.com/structs/253/253196-37-1-8450.webp)
![N-[(1R,2R)-2-Amino-1,2-diphenylethyl]-1,1,1-trifluoromethanesulfonamide structure N-[(1R,2R)-2-Amino-1,2-diphenylethyl]-1,1,1-trifluoromethanesulfonamide structure](https://static.chemtradehub.com/structs/852/852212-89-6-5ef9.webp)
![4-[(2-Fluoro-4-methylphenyl)amino]-6-[4-(2-hydroxyethyl)-1-piperazinyl]-7-methoxy-3-cinnolinecarboxamide structure 4-[(2-Fluoro-4-methylphenyl)amino]-6-[4-(2-hydroxyethyl)-1-piperazinyl]-7-methoxy-3-cinnolinecarboxamide structure](https://static.chemtradehub.com/structs/104/1041852-85-0-fb1c.webp)
