Tracking the distribution of “ecstasy” tablets by Raman composition profiling: A large scale feasibility study
文献情報
Steven E. J. Bell, Lindsay. J. Barrett, D. Thorburn Burns, Andrew C. Dennis, S. James Speers
Here we report the results of the largest study yet carried out on composition profiling of seized “ecstasy” tablets by Raman spectroscopy. Approximately 1500 tablets from different seizures in N. Ireland were analysed and even though practically all the tablets contained MDMA as active constituent, there were very significant differences in their Raman spectra, which were due to variations in both the nature and concentration of the excipients used and/or the degree of hydration of the MDMA. The ratios of the peak heights of the prominent drug bands at 810 cm−1 and 716 cm−1 (which vary with hydration state of the drug), and the drug band at 810 cm−1 against the largest clearly discernible excipient band in the spectrum were measured for all the samples. It was found that there was sufficient variation in composition in the general sample population to make any matches between batches of tablets taken from different seizures significant, rather than the result of random chance. Despite the large number of different batches of tablets examined in this study, only two examples of indistinguishable sets of tablets were found and in only one of these had the two batches of tablets been seized at different times. Finally, the fact that there are many examples of batches of tablets (particularly in different batches taken from single seizures) in which the differences between each set are sufficiently small that they appear to arise only from random variations within a standard manufacturing method implies that, with more extensive data, it may be possible to recognize the “signature” of tablets prepared by major manufacturers.
関連文献
Electrochemically exfoliated covalent organic frameworks for improved photocatalytic hydrogen evolution
Ruijuan Zhang, Pengda Zhai, Xinying Liu
DOI: 10.1039/D3TA06312G
Correction: Accelerating materials discovery using integrated deep machine learning approaches
Weiyi Xia, Ling Tang, Huaijun Sun, Chao Zhang, Kai-Ming Ho
DOI: 10.1039/D3TA90266H
Industrial-scale efficient alkaline water electrolysis achieved with sputtered NiFeV-oxide thin film electrodes for green hydrogen production
Quoc-Nam Ha, Chen-Hao Yeh, Noto Susanto Gultom
DOI: 10.1039/D3TA05699F
Atomic Sn sites on nitrogen-doped carbon as a zincophilic and hydrophobic protection layer for stable Zn anodes
Yijie Wang, Yan Tan, Chuanwei Cheng
DOI: 10.1039/D3TA06372K
Exploring finite-temperature electronic transport in CoSi alloys with transition metals (Cr, Mn, Fe, and Ni) using the KKR-CPA method
Ho Ngoc Nam, Katsuhiro Suzuki
DOI: 10.1039/D3TA06259G
Spiro[fluorene-9,9′-xanthene]-based hole shuttle materials for effective defect passivation in perovskite solar cells
Bommaramoni Yadagiri, Sanjay Sandhu, Ashok Kumar Kaliamurthy, Francis Kwaku Asiam, Jongdeok Park, Appiagyei Ewusi Mensah, Jae-Joon Lee
DOI: 10.1039/D3TA05915D
Fluorinated carbon nitride with a hierarchical porous structure ameliorating PEO for high-voltage, high-rate solid lithium metal batteries
Shuohan Liu, Jieqing Shen, Zhikai Wang, Wensheng Tian, Xiujun Han, Zhixin Chen, Hui Pan, Lei Wang, Dongyu Bian, Shenmin Zhu
DOI: 10.1039/D3TA05495K
Synergistic effect of diatomic materials on efficient formaldehyde sensing and degradation
Renkun Zhang, Liyong Gan
DOI: 10.1039/D3TA06132A
Regulating the kinetic behaviours of polysulfides by designing an Au–COF interface in lithium–sulfur batteries
Chan Li, Ke Yang, Zelin Ma, Fei Zhao, Juan Li, Xinwu Xu, Xiaoyu Hao, Haoyuan Qi, Yibo He
DOI: 10.1039/D3TA05859J
こちらもおすすめ
噻奈普汀乙酯の物理化学的性質は何ですか?
CAS番号66981-77-9の噻奈普汀乙酯は、結晶性白色粉末であり、分子量は476.9 g/molです。この化合物は水に溶けにくく、一般的には有機溶媒で溶解し...
アミピシリン不純物Fとは何ですか?
アミピシリン不純物Fは、CAS番号124774-48-7の化合物です。これは、抗生物質アミピシリンの生産過程で生成される不純物の一つであり、(4S)-2-({[...
イリジウム(I)ヘキサフルオロフォスファートの代替品はありますか?
イリジウム(I)ヘキサフルオロフォスファートの代替品として、他の有機金属化合物や非有機金属化合物が使用されることがあります。具体的には、ダイゾニウム塩や他の金属...
含有3-(苯氧基甲基)苯硼酸频那醇酯の廃棄物はどのように処理すべきですか?
含有3-(苯氧基甲基)苯硼酸频那醇酯の廃棄物は、安全な方法で処理する必要があります。まず、廃棄物を適切な容器に収集し、避けて保管します。次に、専門の廃棄処理業者...
2-甲基辛-1-醇を取り扱う際の実験室安全事項は何ですか?
取り扱う際は、密閉のゴーグルと手袋を着用することが推奨されます。ドラフトチャンバーを使用し、漏洩時には速やかに取り扱いを中止し、適切な排気設備を使用してください...
3α-アセトキノイドコレステロールエステルはどのように保存すればよいですか?
3α-アセトキノイドコレステロールエステルは、常温から低温(0-5℃)の暗所で保存し、密閉容器に入れることで安定性を保つことが推奨されます。また、湿気や酸素から...
2-ぶンジロキシ-4-(トリフルオロメチル)フェノルビノン酸の主な用途は何ですか?
2-ぶンジロキシ-4-(トリフルオロメチル)フェノルビノン酸は、化学合成の触媒としての使用や、医薬品の合成材料としての役割があります。また、特定の合成路線で使用...
(2S,3R)-2-氨基-3-甲基丁二酸はどのように合成されますか?
(2S,3R)-2-氨基-3-甲基丁二酸は、2-ヒドロキシ-3-メチル丁酸とアミノ化反応を行うことで合成されます。触媒としてジクロロメタンが使用され、選択性と収...
1-Benzyl-2-phenyl-1H-imidazoleはどのように保存すればよいですか?
この化合物は常温で避けてください。直射日光を避け、密閉容器で保存し、湿気を防水の容器に入れて保管してください。
掲載誌
Analyst

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.










![4,4'-[2,5-Biphenyldiylbis(oxy)]dianiline structure 4,4'-[2,5-Biphenyldiylbis(oxy)]dianiline structure](https://static.chemtradehub.com/structs/941/94148-67-1-24c6.webp)



