Electropolymerization of 2-methoxyaniline. Polymerization kinetics and phenazine insertion at low monomer concentration
文献情報
F. A. Viva, E. M. Andrade, M. I. Florit, F. V. Molina
The electropolymerization of 2-methoxyaniline (MOA) has been found to yield products having structure and properties dependent on the monomer concentration, with the insertion of phenazinic units giving a redox-type polymer at low concentrations. The kinetics of this process is studied in 1 M HClO4 solutions containing different monomer concentrations. The voltammetric results are compared with the electropolymerization, in similar experimental conditions, of other aryl amines such as aniline and 2-methylaniline. The effect of dimeric additives on the polymerization rate of MOA is also studied. A change in the kinetic behavior is found at MOA concentrations of about 30–60 mM. An electropolymerization mechanism for 2-methoxyaniline is proposed through a reaction scheme similar to that of aniline, with the inclusion of a step consisting in a head-to-head coupling of oligomers and/or polymer chains yielding phenazine-type units, that effectively works as a termination step. The resistivity increase, in the conductive state, due to the insertion of redox units is also considered. The experimental results are interpreted on the basis of this mechanism.
関連文献
Predicting power plant emissions using public data and machine learning
Jiajun Gu, Jeffrey A. Sward, K. Max Zhang
DOI: 10.1039/D3VA00191A
Characterization and quantification of microplastics and organic pollutants in mussels by microwave-assisted sample preparation and analytical pyrolysis
Greta Biale, Lorenzo Fiorentini, Diego Carnaroglio, Marco Mattonai
DOI: 10.1039/D3VA00216K
Harnessing single-atom catalysts for CO2 electroreduction: a review of recent advances
Chang Chen, Jiazhan Li, Xin Tan, Yu Zhang, Yifan Li, Chang He, Zhiyuan Xu, Chao Zhang, Chen Chen
DOI: 10.1039/D3EY00150D
Probing the structure–property relationships of supported copper oxide nanoclusters for methane activation
Xijun Wang, Kaihang Shi, Anyang Peng, Randall Q. Snurr
DOI: 10.1039/D3EY00234A
Unravelling the influence of side-chain symmetry on device performance: insights from isoindigo-based polymers in thin-film transistors
Anita Hu, Audithya Nyayachavadi, Max Weires, Garima Garg, Sihong Wang, Simon Rondeau-Gagné
DOI: 10.1039/D3LP00104K
Macroporous hydrogels for soil water retention in arid and semi-arid regions
Ryan Zowada, Reza Foudazi
DOI: 10.1039/D3LP00117B
Polyamidoxime (PAO) granules for solar-enhanced uranium extraction from seawater
Xue Zhang, Qianhong Gao, Dadong Shao
DOI: 10.1039/D3VA00179B
こちらもおすすめ
3-(5-フェニル-2-ファイル)-プロパン酸の市場動向や研究トレンドはどうですか?
この化合物の市場動向は不明ですが、類似化合物の需要は化学繊維、医薬品、農薬分野で安定しています。研究トレンドとしては、該当化合物の生物学的活性の評価や、その他の...
3- Chloro-1H-indazol-5-olはどのように保存すればよいですか?
3- チロロ-1H-吲唑-5-醇は遮光し、直射日光を避けて、温度は室温を推奨し、密閉容器に保存してください。
L-(1-~13~C)メチオニンの市場動向や研究トレンドはどうですか?
L-(1-~13~C)メチオニンは、医薬品やバイオテクノロジー分野での研究が増加しており、その価格は安定しています。新興研究分野では、代謝解析や遺伝子機能解析で...
1,3-フェニレンビスメチレンビスアクリレートは安全ですか?
1,3-フェニレンビスメチレンビスアクリレートは一般的に安全ですが、直接皮膚に触れる場合は保護用具を使用することを推奨します。高濃度の蒸気が吸入された場合は呼吸...
丹参醇Aはどのように保存すればよいですか?
丹参醇Aは、直射日光を避けて室温で保存し、密栓容器に入れることをお勧めします。適切な保存条件は、安定性を保ち、安全性を確保する上で重要です。
4-メチル-2-(1,1,1-三フロロ-2-メチルプロパニル)ピリドインとは何ですか?
CAS番号1378865-93-0の4-メチル-2-(1,1,1-三フロロ-2-メチルプロパニル)ピリドインは、合成化学分野で用いられる有機化合物の一種です。こ...
N-フェニルベンジル-2-クロロ酢氨を取り扱う際の実験室安全事項は何ですか?
N-フェニルベンジル-2-クロロ酢氨は毒性があり、皮膚や粘膜に刺激を与えます。取り扱う際には、保護眼鏡、手袋、ゴーグルを着用することを強く推奨します。ドラフトチ...
UCN-02を取り扱う際の実験室安全事項は何ですか?
UCN-02は毒性は低いですが、人体への直接的な接触は避けるべきです。PPE要件はグローブと顔面保護具を着用することです。ドラフトチャンバーを使用して漏洩を処理...
N-[3-[2-(二甲基氨基)乙氧基]-4-甲氧基苯基]-2'-甲基-4'-(5-甲基-1,2,4-恶二唑-3-基)-[1,1'-联苯]-4-甲酰胺を取り扱う際の実験室安全事項は何ですか?
手袋と保護眼鏡を着用し、漏洩時には吸気防止装置を使用してください。室温、乾燥した場所に保管し、直日光から隔離してください。SDS(安全データシート)を参照してく...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.











![10-(1-Azabicyclo[2.2.2]oct-3-ylmethyl)-10H-phenothiazine structure 10-(1-Azabicyclo[2.2.2]oct-3-ylmethyl)-10H-phenothiazine structure](https://static.chemtradehub.com/structs/292/29216-28-2-1d81.webp)
![5-Bromoimidazo[1,2-a]pyridine structure 5-Bromoimidazo[1,2-a]pyridine structure](https://static.chemtradehub.com/structs/692/69214-09-1-d8e2.webp)
![N-[(E)-Phenylmethylene]benzenesulfonamide structure N-[(E)-Phenylmethylene]benzenesulfonamide structure](https://static.chemtradehub.com/structs/139/13909-34-7-8167.webp)
