Degradation of naphthalenesulfonic acids by oxidation with ozone in aqueous phase

文献情報

出版日 2002-02-21
DOI 10.1039/B108194B
インパクトファクター 3.676
著者

J. Rivera-Utrilla, M. Sánchez-Polo, C. A. Zaror


原文を見る

要旨

Sulfonic aromatic compounds are widely used in the textile industry for the synthesis of azo dyes. The presence of the sulfonic group endows these compounds with high water-solubility and resistance to biological treatment. The present work analysed the efficacy of oxidation with ozone in the treatment of waters containing naphthalene-1-sulfonic acid, naphthalene-1,5-disulfonic acid and naphthalene-1,3,6-trisulfonic acid. The reactivity to ozone significantly decreased with an increase in the number of sulfonic groups in the aromatic ring, and naphthalene-1,3,6-trisulfonic acid showed the lowest reaction rate. The stoichiometry of the direct ozonization reaction was around one mole of sulfonic acid per mole of ozone in all cases. The activation energy value of the direct ozonization reaction was very similar in all studied cases (37–42 kJ mol−1). The contribution of the direct reaction to the global oxidation at pH 2 was observed to decrease with more sulfonic groups in the aromatic ring, from a contribution of 69% for naphthalene-1-sulfonic acid to around 20% for naphthalene-1,3,6-trisulfonic acid. The radical reaction rate constant was found to be of the order of 109 × M−1 s−1 in all cases, although it showed a slight reduction as the number of sulfonic groups in the aromatic ring increased. A follow-up study of the oxidation products of each sulfonic aromatic acid revealed the presence of highly oxidized organic acids and sulfate ions. A theoretical study of the electronic density at the bond critical point showed that double bonds with highest electron density in the three acids are in positions 1–2, 3–4, 5–6 and 7–8. These bonds are initially attacked by ozone via 1,3-dipolar cycloaddition.

関連文献

Ultrahigh-quality graphene resonators by liquid-based strain-engineering

Mario Hofmann, Chi-Te Liang, Ya-Ping Hsieh

2023-11-02 Communication

DOI: 10.1039/D3NH00420A

2D-Ti3C2Tx MXene-supported Cu2S nanoflakes for supercapacitors and electrocatalytic oxygen evolution reaction

Debika Gogoi, Rajeshvari Samatbhai Karmur, Narendra Nath Ghosh

2023-10-25 Paper

DOI: 10.1039/D3TA05104H

Recent progress of MXene as an energy storage material

Yuqiang Wu, Mengtao Sun

2024-01-05 Minireview

DOI: 10.1039/D3NH00402C

Amorphous C/SbSx composites from natural stibnite as low cost and high performance lithium/sodium-ion battery anodes

Shuonan Wang, Kai Zhang, Hao Liu, Libing Liao

2023-10-26 Paper

DOI: 10.1039/D3TA05355E

Improving the electrochemical performance of Li2S cathodes based on point defect control with cation/anion dual doping

Wenli Pan, Nobuya Machida, Toshiyuki Matsunaga, Mukesh Kumar, Neha Thakur, Toshiki Watanabe, Atsushi Sakuda, Akitoshi Hayashi, Masahiro Tatsumisago, Yoshiharu Uchimoto

2023-10-26 Paper

DOI: 10.1039/D3TA05426H

Coupling post-modification with reconstruction over Co-based metal–organic frameworks for electrochemical collective value-added recycling of nitrate and sulfion in wastewater

Tianlun Ren, Huizhen Wang, Shan Xu, Hongjie Yu, Kai Deng, Ziqiang Wang, Hongjing Wang, Liang Wang, You Xu

2023-10-24 Paper

DOI: 10.1039/D3TA04629J

A bio-inspired multifunctional interface layer for high performance zinc-ion batteries via novel in situ electropolymerization

Jun Wang, Xiuyang Zou, Lina Song, Jianguo Lu, Xiang Gao, Qinggang He

2023-10-04 Paper

DOI: 10.1039/D3TA04886A

Carrier density and delocalization signatures in doped carbon nanotubes from quantitative magnetic resonance

M. Alejandra Hermosilla-Palacios, Marissa Martinez, Evan A. Doud, Tobias Hertel, Alexander M. Spokoyny, Sofie Cambré, Wim Wenseleers, Yong-Hyun Kim, Andrew J. Ferguson, Jeffrey L. Blackburn

2023-11-22 Communication

DOI: 10.1039/D3NH00480E

Simple phenylpropanoids: recent advances in biological activities, biosynthetic pathways, and microbial production

Zhanpin Zhu, Ruibing Chen

2023-10-09 Review Article

DOI: 10.1039/D3NP00012E

こちらもおすすめ

化合物よくある質問

アエポキシアビレーターONE酢酸エステルを含む廃棄物はどのように処理すべきですか?

アエポキシアビレーターONE酢酸エステルを含む廃棄物は、焼却や専門廃棄処理が一般的です。具体的には、廃棄物は密閉容器に収集し、適切な温度と湿度の下で保存します。...

2484719-11-9a-Epoxyabiraterone A...
化合物よくある質問

4-ヒドロキシ但線を取り扱う際の実験室安全事項は何ですか?

取り扱いには化学製品安全管理データシート(SDS)を参照してください。温度10℃以下で保存し、密閉容器に保管してください。漏れ時にはドラフトチャンバーを使用し、...

25714-71-04-Hydroxybutanal
化合物よくある質問

4-(3-環戊基尿素)フェノールボロネートはどの業界で使用されていますか?

4-(3-環戊基尿素)フェノールボロネートは主に医薬品産業で使用されています。この化合物は抗炎症薬や抗うつ薬の候補物質として研究されています。また、ポリマー産業...

874297-80-01-Cyclopentyl-3-[4-(...
化合物よくある質問

N~1~-[3-氯-5-(三氟甲基)-2-吡啶]-1,2-乙二胺の市場動向や研究トレンドはどうですか?

市場では、安全性と効果性を基にした化学物質の需要が高まっています。研究分野では、環境に優しい代替品の開発が進んでおり、その結果、この化合物の市場需要は減少傾向に...

219478-19-0N'-[3-chloro-5-(trif...
化合物よくある質問

6-硝基苯并二氢吡喃-4-酮についての法規ガイドラインは何ですか?

6-硝基苯并二氢吡喃-4-酮(CAS番号: 68043-53-8)は、GHS(統一化された化学品の危険性的分類と標識)で急性毒性第4クラスに分類されます。EUで...

68043-53-86-Nitro-2,3-dihydro-...
化合物よくある質問

5-(肼甲基)-2-甲基吡啶の主な用途は何ですか?

5-(肼甲基)-2-甲基吡啶は、主に医薬品の合成材料や農薬、及び一部の化学試薬として使用されています。

1016705-16-05-(Hydrazinomethyl)-...
化合物よくある質問

6-乙酰基-2(3H)-苯并噻唑酮は安全ですか?

安全性は化合物の使用方法によります。適切な取扱いと防護措置を講じれば、一定の安全性があります。ただし、吸入や皮膚への接触は避けてください。

133044-44-76-Acetyl-1,3-benzoth...
化合物よくある質問

3-メチル-6-(1-メチルヒドラジニル)ピリジジンはどの業界で使用されていますか?

3-メチル-6-(1-メチルヒドラジニル)ピリジジンは主に医薬品、ポリマー、センサー製造業界で使用されています。特に、医薬品産業では抗がん剤や抗真菌剤の候補物質...

175135-44-13-Methyl-6-(1-methyl...
化合物よくある質問

tert-butyl 5-oxo-2,6-diazaspiro[3.4]octane-2-carboxylateの物理化学的性質は何ですか?

tert-butyl 5-オキソ-2,6-ジアザスパイロ[3.4]オクタネ-2-カルボキサongyangはCAS番号1330765-39-3で、分子量は334....

1330765-39-32-Methyl-2-propanyl ...
化合物よくある質問

3-塩素メチルフェニル-4,4,5,5-テトラメチル-1,3,2-ジオキソボロラノールは安全ですか?

3-塩素メチルフェニル-4,4,5,5-テトラメチル-1,3,2-ジオキソボロラノールは、毒性が低いと考えられていますが、直接的な皮膚接触や吸入は避けるべきです...

1073353-44-22-[3-(Chloromethyl)p...

掲載誌

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
自己引用率: 10.3%
年間論文数: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

おすすめサプライヤー

免責事項
このページに表示される学術雑誌情報は、参考および研究目的のみを目的としています。当社は雑誌出版社とは提携しておらず、投稿の取り扱いも行っておりません。出版に関するお問い合わせは、各雑誌出版社に直接ご連絡ください。
表示されている情報に誤りがある場合は、support@chemtradehub.com までご連絡ください。迅速に確認し、対応いたします。