Shock tube combustion of liquid hydrocarbon sprays of toluene
文献情報
The liquid spray combustion of toluene has been studied in shock waves at temperatures between 900 and 2000 K and pressures up to 20 bar in oxygen–argon mixtures. The ignition delays were found to be dependent on the pressure and or fuel/oxygen ratio and the presence of up to 10% of additive. Two types of combustion were found: Type I occurred at lower temperatures and gave a steady combustion where the pressure rose steadily. Type II was detected at higher temperatures and in the presence of certain additives and gave a very sharp ‘spiked’ pressure rise. This phenomenon may be due to the occurrence of small droplet explosions or microcombustions and is similar to that of ‘knock’ in engines. The effect of additives on the ignition delay time depended on both the additive used and the concentration. 1% DTBP (di-tert-butyl peroxide) in the toluene has little effect on the ignition delay but 10% DTBP reduced it a little. 5% IPN (isopropyl nitrate) and EHN (ethyl hexyl nitrate) both had a neglible effect on the ignition time in this temperature region. IPN was also found to affect the type of combustion, changing it from Type I to Type II.
関連文献
Angular geometries and other properties of hydrogen-bonded dimers: a simple electrostatic interpretation of the success of the electron-pair model
DOI: 10.1039/CS9871600467
Robert Robinson Lecture. Post-B12 problems in corrin synthesis
DOI: 10.1039/CS9760500377
Synthesis of iron oxide coated fluoridated HAp/Ln3+ (Ln = Eu or Tb) nanocomposites for biological applications
Jie Pan, Juchen Zhang, Lili Wang, Dong Wan
DOI: 10.1039/C4CC06977C
Rhône-Poulenc Lecture. The origin of the specificity in the recognition of oligosaccharides by proteins
DOI: 10.1039/CS9891800347
Ortho esters and dialkoxycarbenium ions: reactivity, stability, structure, and new synthetic applications
DOI: 10.1039/CS9871600075
1976 Presidential address. Chemistry and the new industrial revolution
DOI: 10.1039/CS9760500317
Awakening to chemistry through storytelling and practical activities: middle school students interacting with pre-school children
C. Morais, J. L. Araújo, I. Saúde
DOI: 10.1039/C8RP00096D
Photoluminescent layered lanthanide–organic framework based on a novel trifluorotriphosphonate organic linker
José A. Fernandes, Duarte Ananias, Luís D. Carlos, João Rocha, João P. C. Tomé, Filipe A. Almeida Paz
DOI: 10.1039/C3CE41482E
こちらもおすすめ
S-(甲硅烷基丙基)異硫酰氯を取り扱う際の実験室安全事項は何ですか?
取り扱う際にはPPE(防護具)が必要です。特に手袋と面マスクは必須です。ドラフトチャンバーを使用して漏洩処理を行い、温度は常温、湿度は乾燥状態、容器はガラス容器...
8-硝基-咪唑并[1,2-a]吡啶とは何ですか?
8-硝基-咪唑并[1,2-a]吡啶は、CAS番号52310-46-0の化合物で、8-位に硝基を有する咪唑並みの结构をもつ吡啶の化合物です。この化合物は、酸化還元...
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品はありますか?
4-ブロモ-5-メトキシピリジン-2-甲醇の代替品には、類似構造を持つ化合物や機能性に等しい代替試薬があります。例えば、4-クロロ-5-メトキシピリジン-2-甲...
全氟-1,2-二甲基環己烷を含む廃棄物はどのように処理すべきですか?
全氟-1,2-二甲基環己烷(CAS番号:306-98-9)の廃棄物は、特別な処理が必要です。まず、廃棄物を密閉容器に収集し、適切な防漏容器に保管します。次に、専...
3-(溴甲基)苯乙酸の主な用途は何ですか?
3-(溴甲基)苯乙酸は主に研究用化学薬品として利用され、有機合成や医薬品の開発に用いられます。また、特定の化合物の合成中間体としても使用されることがあります。
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンはどのように保存すればよいですか?
5-イドキド-4-メチオキシ-6-メチルピリミジニン-2-アミンは冷暗所で密栓の容器に保存し、直射日光を避けて保管することをお勧めします。温度は常温とし、湿気を...
1-(2-溴-6-甲氧基苯基)乙酮を取り扱う際の実験室安全事項は何ですか?
実験室では、1-(2- Bromo-6-methoxyphenyl)ethanoneを取り扱う際には、ゴーグルや面具、手袋などのPPEを使用することが推奨されま...
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは安全ですか?
5-(4,4,5,5-テトラメチル-1,3,2-ダイオキサボラロール-2-イル)-1,3-ジヒドロ-2-ベンゾフランは一般に安全ですが、取扱いには注意が必要です...
4-溴萘-1-甲酸の代替品はありますか?
4-溴萘-1-甲酸は比較的稀な化合物ですが、類似物としては、4-クロロ-1-ナフホリック酸やその他のブロモ置換ナフホリック酸が挙げられます。ただし、これらの代替...
ε-白藜芦醇脱氢二聚体の代替品はありますか?
ε-白藜芦醇脱氢二聚体の代替品としては、ε-白藜芦醇、ポリフェノール類、フラボノイド類が挙げられます。これらは類似の化学構造と生物学的活性を持っています。ただし...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














