Carbonaceous DBP (THMs and HAAs) formation during Cl2 and ClO2 treatment of aqueous soluble fractions of soil derived natural organic matter
文献情報
R. K. Padhi
A substantial portion of surface water dissolved organic matter is of terrestrial origin and serves as an important precursor for toxic disinfection byproduct formation. In the present study, organic matter extracted from a composite soil sample from our local area was investigated for its potential for disinfection byproduct (DBP) formation during Cl2 and ClO2 treatment. The soil organic content (SOC) was separated into base leachable organic content (OCB) and acid leachable organic content (OCA). The OCA and OCB constituents were further fractionated into hydrophobic (HPO), transphilic (TPI) and hydrophilic (HPI) constituents, based on their selective adsorption onto XAD-4 and XAD-8 resin. The isolated organic fractions were treated with 3–25 mg L−1 of Cl2 and ClO2 to evaluate their specific trihalomethane (THM) and haloacetic acid (HAA) potential. The THM formation potentials of the OCA and OCB were 251.2 and 191.3 μg per mg-C for Cl2 treatment at a 3 : 1 Cl2 : OC (organic carbon) ratio. The order of THM formation potentials of different fractions of SOC was HPO > HPI > TPI for the OCA; and HPO > TPI > HPI for the OCB during chlorine treatment. The SOC showed insignificant reactivity toward ClO2: the HPO (4.23 μg per mg-C) and TPI (1.03 μg per g-C) fractions of the OCA only resulted in the formation of a small amount of THMs. Similarly, for HAAs: Cl2 (ClO2) treatment of the OCA and OCB generated 67.2 (11.1) and 114.9 (11.86) μg per mg-C. The distribution pattern of four THMs and nine HAAs was clearly different for the Cl2 and ClO2 treatment of the SOC. Tribromomethane was the dominant THM for Cl2 treatment, whereas bromodichloromethane was the most frequently detected THM for ClO2. The di-HAAs dominated the HAA species in the case of Cl2; in contrast tri-HAAs were the only HAA species formed during ClO2 treatment of the SOC. Overall, these results provide important insights pertaining to the significance of soil derived organic fractions on the formation of DBPs during Cl2 and ClO2 treatment of surface water.
関連文献
Growing polymers from peptides and proteins: a biomedical perspective
Yizhi Qi
DOI: 10.1039/C3PY01089A
Synthesis and solid state helix to helix rearrangement of poly(phenylacetylene) bearing n-octyl alkyl side chains
Asahi Motoshige, Yoshiaki Yoshida, Ranko Motoshige
DOI: 10.1039/C3PY01000G
Synthesis of antimicrobial silsesquioxane–silica hybrids by hydrolytic co-condensation of alkoxysilanes
Shi-qiang Gong, D. Jeevanie Epasinghe, Wei Zhang, Bin Zhou, Li-na Niu, Heonjune Ryou, Ashraf A. Eid, Andrea Frassetto, Cynthia K. Y. Yiu, Dwayne D. Arola, Jing Mao, David H. Pashley, Franklin R. Tay
DOI: 10.1039/C3PY00635B
The synthesis and characterization of supramolecular elastomers based on linear carboxyl-terminated polydimethylsiloxane oligomers
Lin Yang, Yaling Lin, Lianshi Wang, Anqiang Zhang
DOI: 10.1039/C3PY01005H
Core cross-linked star (CCS) polymers with temperature and salt dual responsiveness: synthesis, formation of high internal phase emulsions (HIPEs) and triggered demulsification
Qijing Chen, Yuanyuan Xu, Xueteng Cao, Lianjie Qin, Zesheng An
DOI: 10.1039/C3PY00942D
Multi-stimuli responsive polymers – the all-in-one talents
Florian D. Jochum, Patrick Theato
DOI: 10.1039/C3PY00880K
Combining surface topography with polymer chemistry: exploring new interfacial biological phenomena
Dan Li, Qing Zheng, Yanwei Wang, Hong Chen
DOI: 10.1039/C3PY00739A
Synthesis of novel trithiocarbonate and allyl sulfide containing monomers
Christopher R. Fenoli
DOI: 10.1039/C3PY00709J
Neutral linear amphiphilic homopolymers prepared by atom transfer radical polymerization
Yi Wang, Alina M. Alb, Jibao He, Scott M. Grayson
DOI: 10.1039/C3PY00916E
Fluoro-benzoselenadiazole-based low band gap polymers for high efficiency organic solar cells
Yongxi Li, Zhe Pan, Lei Miao, Ying Xing, Chao Li, Yu Chen
DOI: 10.1039/C3PY01018J
こちらもおすすめ
「邻羟基阿托伐他汀内酯标准品」に適用される法規ガイドelinesは何ですか?
CAS番号163217-74-1の「邻羟基阿托伐他汀内酯标准品」は、GHS分類では危険物に分類されず、主にREACH規則とFDA/EPAの管理対象となります。R...
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩の主な用途は何ですか?
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩は、医薬品や合成化学の研究に広く用いられます。また、特定の薬物の前...
トランス-4-メチルピロリジン-3-オール塩酸塩はどのように合成されますか?
トランス-4-メチルピロリジン-3-オール塩酸塩は、4-メチルピロリジンの塩酸塩化によって合成されます。一般的な合成方法では、4-メチルピロリジンを塩酸に加えて...
硫雜環丁烷-1,1-二氧化物は安全ですか?
硫雜環丁烷-1,1-二氧化物は安全ではありません。毒性は報告されていませんが、高温下で分解し、可燃性があるため、高圧ガスは注意が必要です。密閉した容器で保管し、...
9-ヒドロキシエリプチシネ塩酸塩はどのように合成されますか?
9-ヒドロキシエリプチシネ塩酸塩は、エリプチシネから塩酸を添加することで合成されます。選択性は高いですが、収率は約70%です。
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮の物理化学的性質は何ですか?
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮のCAS番号は5621-86-3です。この化合物は白色の結晶性粉末で、分子量は415.03で...
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪はどのように保存すればよいですか?
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪は、直射日光を避けて暗所に、室温(15-25℃)で保管し、密閉容器に入れることで安定性を保つことができます。
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンの主な用途は何ですか?
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンは、医薬品の合成、有機合成化学、および新材料の研究で使用され...











![S-[2,3-Bis(palmitoyloxy)propyl]-N-[(9H-fluoren-9-ylmethoxy)(hydroxy)methylene]cysteine structure S-[2,3-Bis(palmitoyloxy)propyl]-N-[(9H-fluoren-9-ylmethoxy)(hydroxy)methylene]cysteine structure](https://static.chemtradehub.com/structs/210/210532-98-2-f6a7.webp)

phosphoryl}methyl 4-methylbenzenesulfonate structure {[3-(Hexadecyloxy)propoxy](hydroxy)phosphoryl}methyl 4-methylbenzenesulfonate structure](https://static.chemtradehub.com/structs/864/864068-45-1-ba7c.webp)

![(3R,5R)-1-[(Benzyloxy)carbonyl]-5-methyl-3-piperidinecarboxylic acid structure (3R,5R)-1-[(Benzyloxy)carbonyl]-5-methyl-3-piperidinecarboxylic acid structure](https://static.chemtradehub.com/structs/126/1269757-29-0-c552.webp)