Quantitative structure–property relationship of the photoelectrochemical oxidation of phenolic pollutants at modified nanoporous titanium oxide using supervised machine learning
文献情報
Jesse S. Dondapati, Aicheng Chen
Here we report on an advanced photoelectrochemical (PEC) oxidation of 22 phenolic pollutants based on modified nanoporous TiO2, which was directly grown on a titanium substrate electrochemically. Their degradation rate constants were experimentally determined and their physicochemical properties were computaionally calculated. The quantitative structure–property relationship (QSPR) was elucidated by employing multiple linear regression (MLR) method. A supervised machine learning approach was employed to build QSPR models. The high predictive abilities of the QSPR model were validated via leave-one-out (LOO) method and a strict regimen of statistical validation tests. The significant descriptors identified in the QSPR Model for the phenolic compounds were also assessed using a typical dye pollutant Rhodamine B, further confirming the high effectiveness and predictability of the optimized model. Our study has shown that the integrated effect of the structural, hydrophobic and topological properties along with electronic property should be considered in order to design an efficient PEC catalytic approach for environmental applications.
関連文献
Hyperbranched polysiloxane with highly constrained rings and the effect of the attached arms on the assembly behavior
Chunyan Wu, Chunhua Hu, Yuzhou Liu
DOI: 10.1039/C7PY01177F
A user's guide to the thiol-thioester exchange in organic media: scope, limitations, and applications in material science
Brady T. Worrell, Sudheendran Mavila, Chen Wang, Taylor M. Kontour, Chern-Hooi Lim, Matthew K. McBride, Charles B. Musgrave, Richard Shoemaker
DOI: 10.1039/C8PY01031E
Multivalent polyrotaxane vectors as adaptive cargo complexes for gene therapy
Rodinel Ardeleanu, Andrei I. Dascalu, Dragos Peptanariu, Cristina M. Uritu, Alina Nicolescu, Mihail Barboiu, Mariana Pinteala
DOI: 10.1039/C7PY01256J
Simultaneous superior lubrication and high load bearing by the dynamic weak interaction of a lubricant with mechanically strong bilayer porous hydrogels
Meirong Cai, Bo Yu, Feng Zhou
DOI: 10.1039/C7PY01532A
Glass surface modification via Cu(0)-mediated living radical polymerization of fluorinated and non-fluorinated acrylates
Mojtaba Enayati, Alireza Abbaspourrad
DOI: 10.1039/C7PY01530E
Strategies to combine ROP with ATRP or RAFT polymerization for the synthesis of biodegradable polymeric nanoparticles for biomedical applications
Mattia Sponchioni, Nicolò Manfredini, Matteo Maraldi, Davide Moscatelli
DOI: 10.1039/C8PY00649K
Aromatic polyesters from biosuccinic acid
Gabriel N. Short, Ha T. H. Nguyen, Patricia I. Scheurle, Stephen A. Miller
DOI: 10.1039/C8PY00862K
こちらもおすすめ
「邻羟基阿托伐他汀内酯标准品」に適用される法規ガイドelinesは何ですか?
CAS番号163217-74-1の「邻羟基阿托伐他汀内酯标准品」は、GHS分類では危険物に分類されず、主にREACH規則とFDA/EPAの管理対象となります。R...
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩の主な用途は何ですか?
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩は、医薬品や合成化学の研究に広く用いられます。また、特定の薬物の前...
トランス-4-メチルピロリジン-3-オール塩酸塩はどのように合成されますか?
トランス-4-メチルピロリジン-3-オール塩酸塩は、4-メチルピロリジンの塩酸塩化によって合成されます。一般的な合成方法では、4-メチルピロリジンを塩酸に加えて...
硫雜環丁烷-1,1-二氧化物は安全ですか?
硫雜環丁烷-1,1-二氧化物は安全ではありません。毒性は報告されていませんが、高温下で分解し、可燃性があるため、高圧ガスは注意が必要です。密閉した容器で保管し、...
9-ヒドロキシエリプチシネ塩酸塩はどのように合成されますか?
9-ヒドロキシエリプチシネ塩酸塩は、エリプチシネから塩酸を添加することで合成されます。選択性は高いですが、収率は約70%です。
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮の物理化学的性質は何ですか?
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮のCAS番号は5621-86-3です。この化合物は白色の結晶性粉末で、分子量は415.03で...
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪はどのように保存すればよいですか?
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪は、直射日光を避けて暗所に、室温(15-25℃)で保管し、密閉容器に入れることで安定性を保つことができます。
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンの主な用途は何ですか?
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンは、医薬品の合成、有機合成化学、および新材料の研究で使用され...
掲載誌
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.













![[(1S,2S,3R,4S,7R,9S,10S,12R,15S)-4,12-Diacetyloxy-15-[(2R,3S)-3-benzamido-3-phenyl-2-(2,2,2-trichloroethoxycarbonyloxy)propanoyl]oxy-1,9-dihydroxy-10,14,17,17-tetramethyl-11-oxo-6-oxatetracyclo[11.3.1.03,10.04,7]heptadec-13-en-2-yl] benzoate structure [(1S,2S,3R,4S,7R,9S,10S,12R,15S)-4,12-Diacetyloxy-15-[(2R,3S)-3-benzamido-3-phenyl-2-(2,2,2-trichloroethoxycarbonyloxy)propanoyl]oxy-1,9-dihydroxy-10,14,17,17-tetramethyl-11-oxo-6-oxatetracyclo[11.3.1.03,10.04,7]heptadec-13-en-2-yl] benzoate structure](https://static.chemtradehub.com/structs/100/100431-55-8-7104.webp)
![(2E)-3-(3-Chlorophenyl)-N-{2-[4-(methylsulfonyl)-1-piperazinyl]-2-oxoethyl}acrylamide structure (2E)-3-(3-Chlorophenyl)-N-{2-[4-(methylsulfonyl)-1-piperazinyl]-2-oxoethyl}acrylamide structure](https://static.chemtradehub.com/structs/250/2505001-54-5-c1e9.webp)