Highly efficient luminescent side-chain polymers with short-spacer attached tetraphenylethylene AIEgens via RAFT polymerization capable of naked eye explosive detection
文献情報
Qian Li, Xiao Li, Zhongying Wu, Yuhao Sun, Jianglin Fang, Dongzhong Chen
Tetraphenylethylene (TPE) is one of the well-known typical aggregation-induced emission (AIE) luminogens (AIEgens) and TPE-containing polymers possess excellent processing properties which facilitates the fabrication of various AIE systems and devices. For AIE active side-chain polymers, increasing the fluorescence quantum yield through suitable molecular design is very appealing. In this work, we present the well-controlled synthesis of a series of TPE polyacrylate side-chain polymers of Pm with short spacers with methylene number m = 0–5 via RAFT polymerization. All the obtained polymers exhibit typical and strong AIE characteristics in THF/H2O solution mixtures and in solid state films. In particular, greatly enhanced fluorescence emission is achieved with reduced spacer lengths, and further significant improvement achieved through annealing, which is ascribed to the restriction of intramolecular motions (RIM) and the blocking of the non-radiative channels due to overcrowding and confinement thanks to the strong positive coupling effect and the jacketing effect of side-chain polymers with very short spacers. The quantum yields of 34.4%, 32.0% and 31.4%, respectively, for the polymer films P0, P1 and P2 are several times higher than those of homologous polymers with longer spacers reported in the literature. Based on these TPE side-chain polymers of very short spacers, a simple, economic and visual method for detection of the explosive 2,4,6-trinitrotoluene (TNT) is demonstrated. Therefore, a facile approach and feasible strategy of simply adopting very short spacers for side-chain AIE active polymer preparation to significantly enhance the luminescence efficiency has been properly established and proposed, which may provide guidance and have a wealth of implications for the rational design and preparation of highly efficient luminescent AIE polymer materials.
関連文献
CNT-based bifacial perovskite solar cells toward highly efficient 4-terminal tandem photovoltaics
Min Chen, Fan Fu, Hongwei Zhu, Thomas Feurer, Wenming Tian, Chao Zhu, Ke Zhou, Shengye Jin, Shaik Mohammed Zakeeruddin, Ayodhya N. Tiwari, Nitin P. Padture, Michael Grätzel, Yantao Shi
DOI: 10.1039/D1EE04008A
Correction: Crystal growth of two-dimensional organic–inorganic hybrid perovskites and their application in photovoltaics
Yuling Zhang, Ruyue Wang, Zhan’ao Tan
DOI: 10.1039/D3TA90117C
An alloy small molecule acceptor for green printing organic solar cells overcoming the scaling lag of efficiency
Ji Wan, Yao Wu, Rui Sun, Jiawei Qiao, Xiaotao Hao, Jie Min
DOI: 10.1039/D2EE03134E
Simple silver(i)-salt catalyzed selective hydroboration of isocyanates, pyridines, and quinolines
Vipin K. Pandey, Sangita Sahoo, Arnab Rit
DOI: 10.1039/D2CC00491G
A rotatable cathode with tunable steric hindrance for high-performance aluminum organic batteries
Mingshan Han, Qinqin Zhou, Meng Zhang, Jinshu Wang, Fangyan Cui, Yunfei Yang, Jingwen Su, Weiwei Huang, Yuxiang Hu
DOI: 10.1039/D3TA00343D
A concentration-descending washing strategy with methanol for the enhancement of protein imaging in biological tissues by MALDI-MS
Kun Xue, Jinchao Feng, Yijun Zhou, Biao Liu, Gaopeng Li
DOI: 10.1039/D2AN01678H
A new MCM-41 supported HPF6 catalyst for the library synthesis of highly substituted 1,4-dihydropyridines and oxidation to pyridines: report of one-dimensional packing towards LMSOMs and studies on their photophysical properties
Suman Ray, Mike Brown, Asim Bhaumik, Arghya Dutta, Chhanda Mukhopadhyay
DOI: 10.1039/C3GC40441B
Dearomatization of benzopyrylium triflates with sulfoxonium ylides
Alexandria N. Leveille, Marissa M. Allegrezza, Kalen Laybourn, Anita E. Mattson
DOI: 10.1039/D2CC02023H
Engineering the outcome of cofermentation processes by altering the feedstock sugar-to-protein ratio
R. Bevilacqua, M. Mauricio-Iglesias, S. Balboa, J. M. Lema, M. Carballa
DOI: 10.1039/D2EW00144F
こちらもおすすめ
「邻羟基阿托伐他汀内酯标准品」に適用される法規ガイドelinesは何ですか?
CAS番号163217-74-1の「邻羟基阿托伐他汀内酯标准品」は、GHS分類では危険物に分類されず、主にREACH規則とFDA/EPAの管理対象となります。R...
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩の主な用途は何ですか?
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩は、医薬品や合成化学の研究に広く用いられます。また、特定の薬物の前...
トランス-4-メチルピロリジン-3-オール塩酸塩はどのように合成されますか?
トランス-4-メチルピロリジン-3-オール塩酸塩は、4-メチルピロリジンの塩酸塩化によって合成されます。一般的な合成方法では、4-メチルピロリジンを塩酸に加えて...
硫雜環丁烷-1,1-二氧化物は安全ですか?
硫雜環丁烷-1,1-二氧化物は安全ではありません。毒性は報告されていませんが、高温下で分解し、可燃性があるため、高圧ガスは注意が必要です。密閉した容器で保管し、...
9-ヒドロキシエリプチシネ塩酸塩はどのように合成されますか?
9-ヒドロキシエリプチシネ塩酸塩は、エリプチシネから塩酸を添加することで合成されます。選択性は高いですが、収率は約70%です。
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮の物理化学的性質は何ですか?
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮のCAS番号は5621-86-3です。この化合物は白色の結晶性粉末で、分子量は415.03で...
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪はどのように保存すればよいですか?
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪は、直射日光を避けて暗所に、室温(15-25℃)で保管し、密閉容器に入れることで安定性を保つことができます。
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンの主な用途は何ですか?
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンは、医薬品の合成、有機合成化学、および新材料の研究で使用され...
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.














