(Meth)acrylic monomers with heteroatom-containing ester side chains: a systematic PLP-SEC and polymerization study
文献情報
Marek Stach, Anna Chovancová, Andrea M. Misske, Igor Lacík
The Arrhenius parameters of the propagation rate coefficient for two hetero-atom containing (meth)-acrylates (studied as 1 M solution in N,N-dimethylacetamide (DMAc)) are determined via the pulsed laser polymerization – size-exclusion chromatography (PLP-SEC) method. Absolute molar mass determination is achieved via SEC coupled to on-line multi-angle laser light scattering (MALLS). The data obtained for hydroxypropylcarbamate acrylate (HPCA, A = 3.97 (−1.44 to 1.63) × 106 L mol−1 s−1 and Ea = 14.3 (−1.38 to 5.13) kJ mol−1) are critically compared with the literature known data sets of two structural derivatives, i.e., 2-(phenylcarbamoyloxy)isopropyl acrylate (PhCPA) and 2-(hexylcarbamoyloxy)isopropyl acrylate (HCPA), indicating an increase in the propagation rate coefficient with increasing ester side chain length. Ureidoethyl methacrylate (UMA, A = 2.08 (−0.45 to 0.91) × 106 L mol−1 s−1 and Ea = 19.9 (−0.89 to 0.91) kJ mol−1) represents the first hetero-atom containing methacrylate to be studied via PLP-SEC, evidencing a significantly higher propagation rate coefficient compared to earlier investigated methacrylate-type monomers. Furthermore, the free-radical polymerization behavior of HPCA and UMA is studied via in situ1H-NMR experiments at elevated temperatures allowing for an estimation of average termination rate coefficients (at low conversion) in conjunction with the determined kp data. Furthermore, the polymerization of UMA was successfully controlled by reversible addition–fragmentation chain transfer (RAFT) polymerization as evidenced by the linear evolution of the number-average molar mass, Mn, with conversion (3000 g mol−1 ≤ Mn ≤ 23 000 g mol−1, 1.15 ≤ Đ ≤ 1.3) as well as by nitroxide-mediated polymerization (NMP), as demonstrated by the linear evolution of Mn with conversion (4000 g mol−1 ≤ Mn ≤ 40 000 g mol−1, 1.3 ≤ Đ ≤ 1.4). In addition, HPCA polymerization was successfully controlled by the RAFT process, as evidenced by the linear evolution of Mn with conversion (2000 g mol−1 ≤ Mn ≤ 21 000 g mol−1, 1.2 ≤ Đ ≤ 1.4) and successful chain extension experiments. Finally, the NMP of HPCA exhibited uniform shifts of the molar mass distributions in the range of 5000 g mol−1 ≤ Mn ≤ 70 000 g mol−1 and successful chain extension experiments.
おすすめジャーナル

Russian Chemical Bulletin

Russian Journal of Bioorganic Chemistry

Chemical Communications

New Journal of Chemistry

Journal of Natural Medicines

Russian Journal of Applied Chemistry

Russian Journal of Coordination Chemistry

Chemistry Education Research and Practice

Russian Journal of General Chemistry

Russian Journal of Organic Chemistry
関連文献
Salt-induced reentrant hydrogel of poly(ethylene glycol)–poly(lactide-co-glycolide) block copolymers
Ting Li, Tianyuan Ci, Liang Chen, Lin Yu, Jiandong Ding
DOI: 10.1039/C3PY01107K
Synthesis and solid state helix to helix rearrangement of poly(phenylacetylene) bearing n-octyl alkyl side chains
Asahi Motoshige, Yoshiaki Yoshida, Ranko Motoshige
DOI: 10.1039/C3PY01000G
Polyacetylenes containing BODIPY pendants with different connectivities: synthesis, characterization and opto-electronic properties
Bin Liu, Lingfeng Li, Cuiling Lin, Jingdan Zhou, Zhexin Zhu, Hongyao Xu, Huayu Qiu, Shouchun Yin
DOI: 10.1039/C3PY01021J
Effect of chemically modified graphene oxide on the phase separation behaviour and properties of an epoxy/polyetherimide binary system
Guijun Yu, Peiyi Wu
DOI: 10.1039/C3PY00878A
Micellar-cluster association of ureidopyrimidone functionalized monochelic polybutadiene
Sachin Laxman Bobade, Thomas Malmgren
DOI: 10.1039/C3PY01002C
A versatile Fe3O4 based platform via iron-catalyzed AGET ATRP: towards various multifunctional nanomaterials
Weiwei He, Liang Cheng, Lifen Zhang, Zhuang Liu, Zhenping Cheng, Xiulin Zhu
DOI: 10.1039/C3PY00920C
Chemically recyclable alternating copolymers with low polydispersity from conjugated/aromatic aldehydes and vinyl ethers: selective degradation to another monomer at ambient temperature
Yasushi Ishido, Arihiro Kanazawa, Shokyoku Kanaoka, Sadahito Aoshima
DOI: 10.1039/C3PY00842H
Synthesis of antimicrobial silsesquioxane–silica hybrids by hydrolytic co-condensation of alkoxysilanes
Shi-qiang Gong, D. Jeevanie Epasinghe, Wei Zhang, Bin Zhou, Li-na Niu, Heonjune Ryou, Ashraf A. Eid, Andrea Frassetto, Cynthia K. Y. Yiu, Dwayne D. Arola, Jing Mao, David H. Pashley, Franklin R. Tay
DOI: 10.1039/C3PY00635B
こちらもおすすめ
「邻羟基阿托伐他汀内酯标准品」に適用される法規ガイドelinesは何ですか?
CAS番号163217-74-1の「邻羟基阿托伐他汀内酯标准品」は、GHS分類では危険物に分類されず、主にREACH規則とFDA/EPAの管理対象となります。R...
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩の主な用途は何ですか?
メチル(3R)-3-アミノ-2,3-ジヒドロ-1-ベンゾファンラニン-5-カルボイル酸塩塩酸塩は、医薬品や合成化学の研究に広く用いられます。また、特定の薬物の前...
トランス-4-メチルピロリジン-3-オール塩酸塩はどのように合成されますか?
トランス-4-メチルピロリジン-3-オール塩酸塩は、4-メチルピロリジンの塩酸塩化によって合成されます。一般的な合成方法では、4-メチルピロリジンを塩酸に加えて...
硫雜環丁烷-1,1-二氧化物は安全ですか?
硫雜環丁烷-1,1-二氧化物は安全ではありません。毒性は報告されていませんが、高温下で分解し、可燃性があるため、高圧ガスは注意が必要です。密閉した容器で保管し、...
9-ヒドロキシエリプチシネ塩酸塩はどのように合成されますか?
9-ヒドロキシエリプチシネ塩酸塩は、エリプチシネから塩酸を添加することで合成されます。選択性は高いですが、収率は約70%です。
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮の物理化学的性質は何ですか?
5-塩素-2-(メチルアミノ)フェニル-(2-塩素フェニル)メタン酮のCAS番号は5621-86-3です。この化合物は白色の結晶性粉末で、分子量は415.03で...
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪はどのように保存すればよいですか?
1-[2-(4-甲氧基-苯氧基)-乙基]-哌嗪は、直射日光を避けて暗所に、室温(15-25℃)で保管し、密閉容器に入れることで安定性を保つことができます。
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンの主な用途は何ですか?
2-[3-(4-甲氧基フェニル)プロピル]-4,4,5,5-四メチル-1,3,2-ドイボロロールアンは、医薬品の合成、有機合成化学、および新材料の研究で使用され...
掲載誌
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.
![S-[2,3-Bis(palmitoyloxy)propyl]-N-[(9H-fluoren-9-ylmethoxy)(hydroxy)methylene]cysteine structure S-[2,3-Bis(palmitoyloxy)propyl]-N-[(9H-fluoren-9-ylmethoxy)(hydroxy)methylene]cysteine structure](https://static.chemtradehub.com/structs/210/210532-98-2-f6a7.webp)


![N-[2-(4-Hydroxyphenoxy)-4-nitrophenyl]methanesulfonamide structure N-[2-(4-Hydroxyphenoxy)-4-nitrophenyl]methanesulfonamide structure](https://static.chemtradehub.com/structs/109/109032-22-6-7c88.webp)
